LibreOffice / openIndiana ...

classic Classic list List threaded Threaded
51 messages Options
Next » 123
Michael Meeks-2 Michael Meeks-2
Reply | Threaded
Open this post in threaded view
|

LibreOffice / openIndiana ...

Hi guys

        I was thrilled to read of your efforts trying to get LibreOffice going
on OpenIndiana; it'd be great to get any patches you have back into the
code.

        Having said that - I think we -really- want to discourage use of the
sunpro compiler, and I'd suggest trying to build with gcc/g++ and fixing
that. That is likelier to cause fewer problems in the longer run I think
(though we'll need to rip out a number of compiler conditionals for
solaris at the same time I think). We routinely find & have to
workaround compiler bugs, and the fewer compilers we have to support the
better.

        Anyhow - please do ask questions etc. here - hopefully we're a friendly
lot :-) I'd really recommend building from the "libreoffice-3-5"
code-branch, that is feature frozen and about to get released, whereas
3.4 is some rather ultra deep-frozen branch.

        All the best,

                Michael.

--
[hidden email]  <><, Pseudo Engineer, itinerant idiot

_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
Gary-2 Gary-2
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

On Wed, Jan 25, 2012 at 12:03 PM, Michael Meeks wrote:
>        Anyhow - please do ask questions etc. here - hopefully we're a friendly
> lot :-) I'd really recommend building from the "libreoffice-3-5"
> code-branch, that is feature frozen and about to get released, whereas
> 3.4 is some rather ultra deep-frozen branch.

Hi Michael,

Where would one find the 3.5 release? In the git repo?

much thanks,
Gary
_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
Norbert Thiebaud Norbert Thiebaud
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

On Wed, Jan 25, 2012 at 3:29 PM, Gary <[hidden email]> wrote:
> On Wed, Jan 25, 2012 at 12:03 PM, Michael Meeks wrote:
>>        Anyhow - please do ask questions etc. here - hopefully we're a friendly
>> lot :-) I'd really recommend building from the "libreoffice-3-5"
>> code-branch, that is feature frozen and about to get released, whereas
>> 3.4 is some rather ultra deep-frozen branch.
>
> Hi Michael,
>
> Where would one find the 3.5 release? In the git repo?

yep:
http://cgit.freedesktop.org/libreoffice/core/

The rest (external packages and other needed repos and external
packages) will get pull after autogen...

Norbert
_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
Michael Stahl-2 Michael Stahl-2
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

In reply to this post by Gary-2
On 25/01/12 22:29, Gary wrote:
> On Wed, Jan 25, 2012 at 12:03 PM, Michael Meeks wrote:
>>        Anyhow - please do ask questions etc. here - hopefully we're a friendly
>> lot :-) I'd really recommend building from the "libreoffice-3-5"
>> code-branch, that is feature frozen and about to get released, whereas
>> 3.4 is some rather ultra deep-frozen branch.
>
> Hi Michael,
>
> Where would one find the 3.5 release? In the git repo?

hi Gary,

i've just added a section on checking out the release branch here:

http://wiki.documentfoundation.org/Development/Native_Build

oh, and i definitely second the other Michael's recommendations against
SunStudio: i'd personally only use that again if somebody paid me for
it... and i guess by now it won't be any more work to resurrect the
Solaris/GCC port that OOo used to have many years ago, than to get it to
build again with SunStudio and it's at times peculiar interpretation of
the C++ standard (and don't get me started on its code gen bugs...).

_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
Francois Tigeot Francois Tigeot
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

Hi,

On Wed, Jan 25, 2012 at 11:23:39PM +0100, Michael Stahl wrote:
>
> oh, and i definitely second the other Michael's recommendations against
> SunStudio: i'd personally only use that again if somebody paid me for
> it... and i guess by now it won't be any more work to resurrect the
> Solaris/GCC port that OOo used to have many years ago, than to get it to
> build again with SunStudio and it's at times peculiar interpretation of
> the C++ standard (and don't get me started on its code gen bugs...).

What is the state of GCC in OpenIndiana these days ?

Last time I had a look, gcc-3.3 was still the main compiler, with some
ongoing work to replace it with a 4.6.x version.

--
Francois Tigeot
_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
Jonathan Adams Jonathan Adams
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

In reply to this post by Michael Meeks-2
there is an issue with compiling Mozilla with the gcc compiler on
Solaris (unless they've fixed it in the last year) I think it's due to
the c++ compatibility issue with some standard Solaris libs compiled
with Sun studio.

I will try compiling without mozilla, using gcc (I'm stuck on the
stlport, which stops the xml2cmp compilation anyway)

Jon

On 25 January 2012 20:03, Michael Meeks <[hidden email]> wrote:

> Hi guys
>
>        I was thrilled to read of your efforts trying to get LibreOffice going
> on OpenIndiana; it'd be great to get any patches you have back into the
> code.
>
>        Having said that - I think we -really- want to discourage use of the
> sunpro compiler, and I'd suggest trying to build with gcc/g++ and fixing
> that. That is likelier to cause fewer problems in the longer run I think
> (though we'll need to rip out a number of compiler conditionals for
> solaris at the same time I think). We routinely find & have to
> workaround compiler bugs, and the fewer compilers we have to support the
> better.
>
>        Anyhow - please do ask questions etc. here - hopefully we're a friendly
> lot :-) I'd really recommend building from the "libreoffice-3-5"
> code-branch, that is feature frozen and about to get released, whereas
> 3.4 is some rather ultra deep-frozen branch.
>
>        All the best,
>
>                Michael.
>
> --
> [hidden email]  <><, Pseudo Engineer, itinerant idiot
>
_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
Norbert Thiebaud Norbert Thiebaud
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

On Thu, Jan 26, 2012 at 3:27 AM, Jonathan Adams <[hidden email]> wrote:
> there is an issue with compiling Mozilla with the gcc compiler on
> Solaris (unless they've fixed it in the last year) I think it's due to
> the c++ compatibility issue with some standard Solaris libs compiled
> with Sun studio.
>
> I will try compiling without mozilla, using gcc (I'm stuck on the
> stlport, which stops the xml2cmp compilation anyway)

humm... we don't need stlport these day... we only build it for
external extensions that may still need it... but surely for
OpenSolaris existing base of extension is probably not a critical
issue....
so --without-stlport may be indicated here...

Norbert
_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
sberg sberg
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

On 01/26/2012 10:52 AM, Norbert Thiebaud wrote:
> humm... we don't need stlport these day... we only build it for
> external extensions that may still need it... but surely for
> OpenSolaris existing base of extension is probably not a critical
> issue....

...and any existing C++ extensions for Solaris would not work, anyway,
as they are compiled against the Sun Studio ABI, not the GCC one.

Stephan
_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
Michael Meeks-2 Michael Meeks-2
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...


On Thu, 2012-01-26 at 11:21 +0100, Stephan Bergmann wrote:
> On 01/26/2012 10:52 AM, Norbert Thiebaud wrote:
> > humm... we don't need stlport these day... we only build it for
> > external extensions that may still need it...

        I forget when that happened, but you're really best off with the 3.5
builds where stlport is certainly optional.

> > but surely for OpenSolaris existing base of extension is probably
> > not a critical issue....
>
> ...and any existing C++ extensions for Solaris would not work, anyway,
> as they are compiled against the Sun Studio ABI, not the GCC one.

        Of course :-) but I've never seen a binary Solaris extension in the
wild, so ... stlport is one to happily ignore.

        HTH,

                Michael.

--
[hidden email]  <><, Pseudo Engineer, itinerant idiot

_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
Jonathan Adams Jonathan Adams
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

beginning to get somewhere with GCC ... gonna update the list of changes so far:

file ./configure.in: (this one should be safe for all platforms)
grep -q => \$GREP -q

file ./solenv/inc/unitools.mk: (this one should be safe for all
platforms, since it only affects Solaris, and Solaris 10 has the file
in this location)
GNUMAKE=/usr/sfw/bin/gmake

files ./python/makefile.mk ./libexttextcat/makefile.mk
./solenv/inc/tg_ext.mk: (only safe on Solaris)
"xargs -0" -> "/usr/gnu/bin/xargs -0"

files soltools/adjustvisibility/makefile.mk
soltools/mkdepend/makefile.mk soltools/util/makefile.pmk: (probably
not safe if SunStudio is the compiler ... )
remove Cstd lines

files ./inc/unxsogi.mk ./inc/unxgcc.mk ./inc/unxsogs.mk
unxsogi.pro/misc/make_makedepend.makedepend_1.cmd (unsure whether or
not this is safe)
remove xport-dynamic lines

file soltools/adjustvisibility/adjustvisibility.cxx (unsure if this
even works on anywhere but my system)
add "#include <cstring>"

I compile with explicit CC and CXX compilers:
./autogen.sh  CC=/usr/gcc/4.6/bin/gcc CXX=/usr/gcc/4.6/bin/g++
LD=/usr/gnu/bin/ld MAKE=/usr/bin/gmake \
--with-jdk-home=/usr/jdk/instances/jdk1.6.0 \
--disable-ccache \
--disable-epm \
--disable-mozilla \
--disable-neon \
--disable-odk \
--disable-opengl \
--disable-systray \
--with-alloc=system \
--with-fonts \
--without-stlport \
--with-system-libxml

It's further than it has been up until this point, 1/4 of the way
around the nice animated status indicator ...

Jon

On 26 January 2012 11:11, Michael Meeks <[hidden email]> wrote:

>
> On Thu, 2012-01-26 at 11:21 +0100, Stephan Bergmann wrote:
>> On 01/26/2012 10:52 AM, Norbert Thiebaud wrote:
>> > humm... we don't need stlport these day... we only build it for
>> > external extensions that may still need it...
>
>        I forget when that happened, but you're really best off with the 3.5
> builds where stlport is certainly optional.
>
>> > but surely for OpenSolaris existing base of extension is probably
>> > not a critical issue....
>>
>> ...and any existing C++ extensions for Solaris would not work, anyway,
>> as they are compiled against the Sun Studio ABI, not the GCC one.
>
>        Of course :-) but I've never seen a binary Solaris extension in the
> wild, so ... stlport is one to happily ignore.
>
>        HTH,
>
>                Michael.
>
> --
> [hidden email]  <><, Pseudo Engineer, itinerant idiot
>
_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
Norbert Thiebaud Norbert Thiebaud
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

On Thu, Jan 26, 2012 at 10:14 AM, Jonathan Adams <[hidden email]> wrote:

> file ./solenv/inc/unitools.mk: (this one should be safe for all
> platforms, since it only affects Solaris, and Solaris 10 has the file
> in this location)
> GNUMAKE=/usr/sfw/bin/gmake

That should really be handled in configure.in, and not overriden in unitools.mk
configure.in already set GNUMAKE.

>
> files ./python/makefile.mk ./libexttextcat/makefile.mk
> ./solenv/inc/tg_ext.mk: (only safe on Solaris)
> "xargs -0" -> "/usr/gnu/bin/xargs -0"
>
> files soltools/adjustvisibility/makefile.mk
> soltools/mkdepend/makefile.mk soltools/util/makefile.pmk: (probably
> not safe if SunStudio is the compiler ... )
> remove Cstd lines

'adjustvisibility'  seems to be a SunStudio 8 ack... should not be
nedeed at all for gcc build

Norbert
_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
Jonathan Adams Jonathan Adams
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

I'm coming to the conclusion that the system doesn't believe I'm using
GCC ... nss keeps trying to build with "-KPIC", rather than "-fPIC"
... any suggestions and I'll eagerly try them :)

On 26 January 2012 16:42, Norbert Thiebaud <[hidden email]> wrote:

> On Thu, Jan 26, 2012 at 10:14 AM, Jonathan Adams <[hidden email]> wrote:
>
>> file ./solenv/inc/unitools.mk: (this one should be safe for all
>> platforms, since it only affects Solaris, and Solaris 10 has the file
>> in this location)
>> GNUMAKE=/usr/sfw/bin/gmake
>
> That should really be handled in configure.in, and not overriden in unitools.mk
> configure.in already set GNUMAKE.
>
>>
>> files ./python/makefile.mk ./libexttextcat/makefile.mk
>> ./solenv/inc/tg_ext.mk: (only safe on Solaris)
>> "xargs -0" -> "/usr/gnu/bin/xargs -0"
>>
>> files soltools/adjustvisibility/makefile.mk
>> soltools/mkdepend/makefile.mk soltools/util/makefile.pmk: (probably
>> not safe if SunStudio is the compiler ... )
>> remove Cstd lines
>
> 'adjustvisibility'  seems to be a SunStudio 8 ack... should not be
> nedeed at all for gcc build
>
> Norbert
_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
Michael Stahl-2 Michael Stahl-2
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

In reply to this post by Norbert Thiebaud
On 26/01/12 17:42, Norbert Thiebaud wrote:
> On Thu, Jan 26, 2012 at 10:14 AM, Jonathan Adams <[hidden email]> wrote:

good to hear you're making some progress there :)

>> files soltools/adjustvisibility/makefile.mk
>> soltools/mkdepend/makefile.mk soltools/util/makefile.pmk: (probably
>> not safe if SunStudio is the compiler ... )
>> remove Cstd lines
>
> 'adjustvisibility'  seems to be a SunStudio 8 ack... should not be
> nedeed at all for gcc build

indeed, from what i remember adjustvisibility works around some
deficiency in SunStudio to make the crash reporter produce useful
backtraces.  but currently we don't use the crash reporter on any
platform anyway (no server backend).

the problem you're going to hit pretty soon is that our new GNU make
based build system doesn't have support for Solaris/GCC currently; there
is only solenv/gbuild/platform/solaris.mk which is only SunStudio.

probably at first it would be best to replace the bits in there that use
compiler specific stuff with the equivalents from
solenv/gbuild/platform/unxgcc.mk until you have something that builds,
later we can refactor it to remove duplications etc.

_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
Caolán McNamara Caolán McNamara
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

In reply to this post by Jonathan Adams
On Thu, 2012-01-26 at 16:14 +0000, Jonathan Adams wrote:
> It's further than it has been up until this point, 1/4 of the way
> around the nice animated status indicator ...

At some stage you'll need (the dreaded) uno-bridge[1], first symptom of
not having one or a broken one would be a build error in i18npool, and
later on in testtools which exercises the bridge a lot.

I see that there *is* one for solaris sparc and gcc (I had to blink a
few times when I saw that there was one), i.e.
bridges/source/cpp_uno/gcc3_solaris_sparc so you might be incredibly
lucky and that's actually buildable and works fine.

If it doesn't work, you *might* get away with editing
bridges/source/cpp_uno/gcc3_linux_sparc/makefile.mk
to just add some appropriate .IF fooSOLARISfoo in there to try to use it
under solaris as well as LINUX (e.g.
see ../gcc3_linux_x86-64/makefile.mk for similar hackery).

If both fail, here's my notes from a few successful attempts at getting
a working bridge
http://wiki.services.openoffice.org/wiki/Lazy_Hackers_Guide_To_Porting

C.

_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
sberg sberg
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

On 01/26/2012 05:56 PM, Caolán McNamara wrote:
> I see that there *is* one for solaris sparc and gcc (I had to blink a
> few times when I saw that there was one), i.e.
> bridges/source/cpp_uno/gcc3_solaris_sparc so you might be incredibly
> lucky and that's actually buildable and works fine.

There's also solenv/inc/unxsog{i,s}.mk, and
bridges/source/cpp_uno/gcc3_solaris_intel/, so somebody was definitely
busy in this area before, though I don't know how well-maintained all
that is.

Stephan
_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
Michael Meeks-2 Michael Meeks-2
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

In reply to this post by Jonathan Adams
Hi Jonathan,

On Thu, 2012-01-26 at 16:14 +0000, Jonathan Adams wrote:
> beginning to get somewhere with GCC ... gonna update the list of changes so far:

        Great :-) if you do a:

        'git diff'

        and just send the patch with some nice license is: MPL/LGPLv3+
statement, we can at least review and push to master :-)

> I compile with explicit CC and CXX compilers:
> ./autogen.sh  CC=/usr/gcc/4.6/bin/gcc CXX=/usr/gcc/4.6/bin/g++
> LD=/usr/gnu/bin/ld MAKE=/usr/bin/gmake \
> --with-jdk-home=/usr/jdk/instances/jdk1.6.0 \
> --disable-ccache \
> --disable-epm \
> --disable-mozilla \
> --disable-neon \
> --disable-odk \
> --disable-opengl \
> --disable-systray \
> --with-alloc=system \
> --with-fonts \
> --without-stlport \
> --with-system-libxml

        It's prolly a good idea to create a distro-config/OpenIndiana.conf or
somesuch and codify this little lot in there.

> It's further than it has been up until this point, 1/4 of the way
> around the nice animated status indicator ...

        Great :-)

On Thu, 2012-01-26 at 16:52 +0000, Jonathan Adams wrote:
> I'm coming to the conclusion that the system doesn't believe I'm using
> GCC ... nss keeps trying to build with "-KPIC", rather than "-fPIC"
> ... any suggestions and I'll eagerly try them :)

        Right - I -imagine- that (in general) the build system ( of which we
have both dmake and gnumake (transitioning to the latter) ) assumes that
Solaris == SUNPRO.

        IMHO, we should change that to Solaris == gcc - and remove all the old
sunpro cruft, without any attempt at adding conditionals for that heap
[ much easier too ;-]. As Michael Stahl says, that will mean some
hackery in:

        solenv/gbuild/platform/solaris.mk

        Hope that helps :-)

                Michael.

--
[hidden email]  <><, Pseudo Engineer, itinerant idiot

_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
sberg sberg
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

On 01/26/2012 06:55 PM, Michael Meeks wrote:
> On Thu, 2012-01-26 at 16:52 +0000, Jonathan Adams wrote:
>> I'm coming to the conclusion that the system doesn't believe I'm using
>> GCC ... nss keeps trying to build with "-KPIC", rather than "-fPIC"
>> ... any suggestions and I'll eagerly try them :)
>
> Right - I -imagine- that (in general) the build system ( of which we
> have both dmake and gnumake (transitioning to the latter) ) assumes that
> Solaris == SUNPRO.

But this looks odd in nss.  Module nss is an external one still built
with the old build system, so it should probably pick up the Solaris/GCC
settings from solenv/inc/unxsog{i,s}.mk just fine -- or else there'd
probably already be problems earlier, with other modules?  And
nss/makefile.mk does not look like we pass any switches from "our" build
system into nss's, anyway, so it might also be a genuine problem of
nss's own configure?  (On the other hand, that sound unlikely too.)

Maybe dumping the whole build output (incl. the output from autogen.sh,
whether you run that manually or from top-level make) could help sort
things out.

Stephan
_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
Norbert Thiebaud Norbert Thiebaud
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

On Thu, Jan 26, 2012 at 12:03 PM, Stephan Bergmann <[hidden email]> wrote:

> On 01/26/2012 06:55 PM, Michael Meeks wrote:
>>
>> On Thu, 2012-01-26 at 16:52 +0000, Jonathan Adams wrote:
>>>
>>> I'm coming to the conclusion that the system doesn't believe I'm using
>>> GCC ... nss keeps trying to build with "-KPIC", rather than "-fPIC"
>>> ... any suggestions and I'll eagerly try them :)
>>
>>
>>        Right - I -imagine- that (in general) the build system ( of which
>> we
>> have both dmake and gnumake (transitioning to the latter) ) assumes that
>> Solaris == SUNPRO.
>
>
> But this looks odd in nss.  Module nss is an external one still built with
> the old build system, so it should probably pick up the Solaris/GCC settings
> from solenv/inc/unxsog{i,s}.mk just fine -- or else there'd probably already
> be problems earlier, with other modules?  And nss/makefile.mk does not look
> like we pass any switches from "our" build system into nss's, anyway, so it
> might also be a genuine problem of nss's own configure?  (On the other hand,
> that sound unlikely too.)

nss has had some work done by kendy wrt to sharing stuff with moz
IIRC... that could maybe explain some Solaris build breakage

Norbert
_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
Gary-2 Gary-2
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

In reply to this post by sberg
On Thu, Jan 26, 2012 at 10:03 AM, Stephan Bergmann wrote:

> Maybe dumping the whole build output (incl. the output from autogen.sh,
> whether you run that manually or from top-level make) could help sort things
> out.

$ MAKE=gmake PYTHON_LIBS="-L/usr/lib/python2.6"
PYTHON_CFLAGS="-I/usr/include/python2.6" ./configure
--with-jdk-home=/usr/jdk/latest
--with-junit=/usr/share/lib/java/junit.jar --disable-mozilla
--disable-odk --enable-binfilter --enable-python=auto
********************************************************************
*
*   Running LibreOffice build configuration.
*
********************************************************************

checking build system type... i386-pc-solaris2.11
checking host system type... i386-pc-solaris2.11
checking for sed... /usr/gnu/bin/sed
checking the Solaris operating system release... ok (11)
checking the processor type... ok (i386)
checking for grep that handles long lines and -e... /usr/gnu/bin/grep
checking for egrep... /usr/gnu/bin/grep -E
checking for gawk... gawk
checking for gawk... /usr/bin/gawk
checking for bash... /usr/bin/bash
checking for GNU or BSD tar... gtar
checking for ccache... not found
checking gcc home... /usr
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for gcc... /usr/bin/gcc
checking the GNU C compiler version... checked (gcc 3.4.3)
checking for -Bsymbolic-functions linker support ... not found
checking whether to enable crashdump feature... no
checking whether to turn warnings to errors... no
checking whether to do a debug build... no
checking whether to build with additional debug utilities... no, full
product build
checking whether to use linkoo for the smoketest installation... yes
checking whether to use link-time optimization... no
checking whether to include symbols... no
checking whether to strip the solver or not.... yes
checking whether cups support is present... checking for
cupsPrintFiles in -lcups... yes
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking cups/cups.h usability... yes
checking cups/cups.h presence... yes
checking for cups/cups.h... yes
checking whether we need fontconfig... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for FONTCONFIG... yes
checking whether we want to fetch tarballs... yes
checking whether to enable filters for legacy binary file formats
(StarOffice 5.2)... yes
checking whether to build help... yes
checking whether to use RPATH in shared libraries... yes
checking whether to include MySpell dictionaries... yes
checking whether to use dicts from external paths... no
checking whether to enable pch feature... no, obsolete
checking for GNU make... gmake
checking the GNU make version... gmake 3.81
checking for GNU make bug 20033... yes, disable parallelism
checking for --hash-style gcc linker support ... no
checking for perl... /usr/bin/perl
checking the Perl version... checked (perl 5)
checking for required Perl modules... all modules found
checking for pkg-config... (cached) /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for ar... ar
checking for nm... nm
checking for objdump... objdump
checking for ranlib... ranlib
checking for strip... strip
checking for ANSI C header files... (cached) yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking the GNU C++ compiler version... checked (g++ 3.4.3)
checking whether g++ has the enum bug... no
checking how to run the C++ preprocessor... g++ -E
checking size of long... 4
checking size of short... 2
checking size of int... 4
checking size of long long... 8
checking size of double... 8
checking size of void*... 4
checking alignment of short... 2
checking alignment of int... 4
checking alignment of long... 4
checking alignment of double... 4
checking whether byte ordering is bigendian... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking valgrind.h usability... no
checking valgrind.h presence... no
checking for valgrind.h... no
checking valgrind.h usability... no
checking valgrind.h presence... no
checking for valgrind.h... no
checking for g++ include path...
/usr/sfw/lib/gcc/i386-pc-solaris2.11/3.4.3/../../../../include/c++/3.4.3
checking Whether building STLPort library makes sense... yes
checking Whether STLPort library will be actually built... yes
checking whether g++ supports thread safe statics... no
checking whether gcc supports -fvisibility=hidden... no
checking whether gcc supports -Wno-long-double... no
checking whether gcc supports -mno-avx... no
checking whether gcc supports -std=c++0x without Language Defect 757... no
checking which memory allocator to use... internal
checking for posix_fallocate... yes
checking whether to add custom build version... no
checking whether to build with Java support... yes
checking the installed JDK... checked (JDK 1.6.0_26)
checking for target Java bytecode version... 1.6
checking for jawt lib name... -ljawt
checking for dmake... no
dmake will be built on ./bootstrap
checking whether to enable EPM for packing... no
checking for gperf... /usr/bin/gperf
checking gperf version... OK
checking whether to build the ODK... no
checking whether to provide libstdc++/libgcc_s in the installset... yes
checking which zlib to use... external
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for deflate in -lz... yes
checking which jpeg to use... internal
checking which expat to use... internal
checking which libvisio to use... internal
checking which libcmis to use... internal
checking which libwpd to use... internal
checking which cppunit to use... internal
checking whether freetype is available... checking for FREETYPE... yes
checking which libwps to use... internal
checking which libwpg to use... internal
checking for FT_GlyphSlot_Embolden in -lfreetype... yes
checking which libxslt to use... internal
checking which libxml to use... internal
checking which Python to use... checking below
checking for a Python interpreter with version >= 2.6... python
checking for python... /usr/bin/python
checking for python version... 2.6
checking for python platform... sunos5
checking for python script directory... ${prefix}/lib/python2.6/site-packages
checking for python extension module directory...
${exec_prefix}/lib/python2.6/site-packages
checking Python.h usability... no
checking Python.h presence... no
checking for Python.h... no
checking which db to use... internal
checking which lucene to use... internal
checking whether to build the MySQL Connector extension... no
checking which hsqldb to use... internal
checking which beanshell to use... internal
checking which saxon to use... internal
checking whether building the stax is required... yes (no system saxon
and no prebuilt copy)
checking which libcurl to use... internal
checking which boost to use... internal
checking which mdds to use... internal
checking which hash container mdds shall use... boost::unordered_map
checking which vigra to use... internal
checking which odbc headers to use... internal
checking whether to enable build of Mozilla... no
checking whether to build Mozilla addressbook connectivity... no
checking whether to build XML Security support... yes
checking whether to build LDAP configuration backend... no. Either
Mozilla or OpenLDAP required
checking which Mozilla to use... none
checking which NSS to use... internal
checking which mozilla headers to use... internal
checking which sane header to use... internal
checking which icu to use... internal
checking whether to enable graphite support... no
checking whether to use system SampleICC... no
checking wether to build nsplugin extension... yes
checking for X... libraries , headers
checking for gethostbyname... no
checking for gethostbyname in -lnsl... yes
checking for connect... no
checking for connect in -lsocket... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for XOpenDisplay in -lX11... yes
checking for XauDisposeAuth in -lXau... yes
checking for X11/Composite.h... yes
checking whether to use internal X11 extensions headers... no
checking whether to use Xrender... yes
checking for XRenderQueryVersion in -lXrender... yes
checking which Xrender headers to use... external
checking X11/extensions/Xrender.h usability... yes
checking X11/extensions/Xrender.h presence... yes
checking for X11/extensions/Xrender.h... yes
checking whether to enable RandR support... yes
checking for XRANDR... yes
checking whether to use neon... yes
checking which neon to use... internal
checking which libssl to use... internal
checking which redland library to use... internal
checking which libhunspell to use... internal
checking which altlinuxhyph to use... internal
checking which mythes to use... internal
checking which lpsolve to use... internal
checking which libexttextcat to use... internal
checking for getopt... yes
checking for readdir_r... yes
checking for bison... /usr/bin/bison
checking the bison version... checked (/usr/bin/bison 2.3)
checking for flex... /usr/bin/flex
checking for patch... /usr/gnu/bin/patch
checking whether /usr/gnu/bin/patch is GNU patch... yes
checking whether /usr/gnu/bin/cp is GNU cp from coreutils with
preserve= support... yes
checking for zip... /usr/local/bin/zip
checking for unzip... /usr/bin/unzip
checking which VCLplugs shall be built... gtk
checking whether to enable GConf support... yes
checking for GCONF... yes
checking whether to enable GNOME VFS support... yes
checking for GNOMEVFS... yes
checking for GTK... yes
checking for GTHREAD... yes
checking for GTK210... yes
checking whether to enable Gtk print dialog support... checking for
GTK_PRINT... yes
checking whether to enable DBUS support... no
checking whether to enable GIO support... no
checking for LIBPNG... yes
checking whether to enable libpng linking in quickstarter... yes
checking whether to enable the GStreamer avmedia backend... yes
checking for GSTREAMER... yes
checking whether to build the OpenGL Transitions component... yes
checking for main in -lGL... yes
checking for main in -lGLU... yes
checking which Mesa headers to use... internal
checking whether to build the Presentation Minimizer extension... yes
checking whether to build the Presenter Console extension... yes
checking whether to build the PDF Import extension... yes
checking which pdf backend to use... internal
checking for sdext module... checking whether to build the Wiki
Publisher extension... no
checking whether to build the Report Builder extension... yes
checking for reportbuilder module... checking which jfreereport libs
to use... internal
checking for jfreereport module... checking which Apache commons-*
libs to use... internal
checking whether to build extension for support of scripts in BeanShell... no
checking whether to build extension for support of scripts in JavaScript... no
checking whether to enable the lockdown pieces... no
checking whether to enable evolution 2 support... no
checking whether to enable KDE address book support... no
checking whether to include MathMLDTD... no
checking which themes to include...  default crystal hicontrast oxygen tango
checking for helppack integration... integration
checking for extensions integration... yes, use integration
checking for Watch Window extension integration... no
checking for SmART Gallery (Diagram) extension integration... no
checking for Validator extension integration... no
checking for Barcode extension integration... no
checking for ConvertTextToNumber extension integration... no
checking for Numbertext extension integration... no
checking for Hungarian Cross-reference Toolbar extension integration... no
checking for Typography Toolbar extension integration... no
checking for Google Docs extension integration... no
checking for NLPSolver extension integration... no
checking for LanguageTool extension integration... no
checking for oooblogger extension integration... no
checking for Sun Professional Template Pack integration (only
supported languages displayed)... no integration
checking whether to include third-party fonts... yes
checking whether to include Agfa Monotype fonts... no
checking whether to include PPDs... yes
checking whether to include AFMs... yes
checking whether to include extra galleries... no
checking whether to include extra templates... no
checking whether to include extra samples... no
checking whether to include extra fonts... no
checking whether to download OxygenOffice branding and set custom settings... no
checking whether to build global menu support... no
checking whether to enable online update... no
checking whether build target is Release Build... no
checking whether to create MSI with LIMITUI=1 (silent install)... no
checking whether and how to use Xinerama... no
checking what librsvg to use... checking further
checking for LIBRSVG... yes
checking whether to use the system cairo... no
checking whether to use the system gdk-pixbuf... yes
checking whether to use the system GLib... yes
checking whether to use the system gettext runtime... yes
checking whether to use the system libcroco... yes
checking whether to use the system pango... yes
checking whether to use the system libgsf... yes
checking whether to use the system libpng... no
checking whether to use the system libjpeg... yes
checking whether to use specific JVM search path at runtime... no
checking for jakarta-ant... no
checking for ant... /usr/bin/ant
checking if /usr/bin/ant works... Ant works
checking Ant lib directory... Ant lib directory found.
checking whether Ant is >= 1.6.0... yes, 1.7.1
checking for JUnit 4... /usr/share/lib/java/junit.jar
checking for product version... 3.5
checking which languages to be built... en-US
checking for custom 'intro' progress bar color... none
checking for custom 'intro' progress bar size... none
checking for custom 'intro' progress bar position... none
checking for custom 'intro' progress bar frame color... none
checking for alternative branding images directory... none
checking for yet another 'intro' bitmap... none
checking for yet another 'about' bitmap... none
checking for yet another 'start center left' bitmap... none
checking for yet another 'start center right' bitmap... none
checking for yet another 'start center rtl left' bitmap... none
checking for yet another 'start center rtl right' bitmap... none
checking for yet another 'start center space' bitmap... none
checking for vendor... not set
checking for UNIX wrapper name... not set
checking whether to install the compat oo* wrappers... no
checking for product name... LibreOffice
checking for install dirname... libreoffice
checking for prefix... /usr/local
checking for libdir... /usr/local/lib
checking for data dir... /usr/local/share
checking for man dir... /usr/local/share/man
checking for doc dir... /usr/local/share/doc/libreoffice
checking for install dir... /usr/local/lib/libreoffice
checking whether to statically link to Gtk... no
checking build verbosity... not set
checking whether to use zenity during build... yes
checking for zenity... no
checking whether to enable dependency tracking... yes
checking for number of processors to use... grep: /proc/cpuinfo: No
such file or directory
1
checking whether to create a big library for better performance... no
checking for maximum of jobs per processor... 1
checking for maximum parallelism for gmake... per module:1, for tail_build:1
setting up the build environment variables...
checking solver path... default
setting up the post_download check script
configure: creating ./config.status
config.status: creating ooo.lst
config.status: creating set_soenv
config.status: creating bin/repo-list
config.status: creating desktop/scripts/soffice.sh
config.status: creating build_env
Configuration unchanged - avoiding scp2 stamp update
Setting up the environment for building LibreOffice
Setting Solaris specific values... done

****************************************************************************
*
* LibreOffice configuration finished.
*
****************************************************************************
To build, issue:
gmake

To install when the build is finished, issue:
gmake install

If you want to develop LibreOffice, you might prefer:
gmake dev-install

If you want to run the smoketest, issue:
gmake check

gdriggs@drjones:/usr/local/src/libreoffice-core-3.5.0.1$ gmake
gmake[1]: Entering directory `/usr/local/src/libreoffice-core-3.5.0.1'
gmake[1]: `/usr/local/src/libreoffice-core-3.5.0.1/Env.Host.sh' is up to date.
gmake[1]: Leaving directory `/usr/local/src/libreoffice-core-3.5.0.1'
gmake[1]: Entering directory `/usr/local/src/libreoffice-core-3.5.0.1'
checking build system type... i386-pc-solaris2.11
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether gcc and cc understand -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking for ranlib... ranlib
checking for gawk... (cached) gawk
checking the operating system... checked (SunOS)
checking whether to do a build with dbug macros... no
checking if spawn shall be used... no
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for grep that handles long lines and -e... /usr/gnu/bin/grep
checking for egrep... /usr/gnu/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking for strings.h... (cached) yes
checking for sys/types.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking for unistd.h... (cached) yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking utime.h usability... yes
checking utime.h presence... yes
checking for utime.h... yes
checking spawn.h usability... yes
checking spawn.h presence... yes
checking for spawn.h... yes
checking wait.h usability... yes
checking wait.h presence... yes
checking for wait.h... yes
checking sys/wait.h usability... yes
checking sys/wait.h presence... yes
checking for sys/wait.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for an ANSI C-conforming const... yes
checking for off_t... yes
checking for size_t... yes
checking for int8... no
checking for uint8... no
checking for int16... no
checking for uint16... no
checking for int32... no
checking for uint32... no
checking whether time.h and sys/time.h may both be included... yes
checking for short... yes
checking size of short... 2
checking for int... yes
checking size of int... 4
checking for long... yes
checking size of long... 4
checking for working memcmp... yes
checking return type of signal handlers... void
checking for utime.h... (cached) yes
checking whether utime accepts a null argument... yes
checking for vprintf... yes
checking for _doprnt... yes
checking for getcwd... yes
checking for getwd... yes
checking for strerror... yes
checking for setvbuf... yes
checking for tzset... yes
checking for settz... no
checking for mkstemp... yes
checking for tempnam... yes
checking for gettimeofday... yes
checking for setenv... yes
checking for strlwr... no
configure: creating ./config.status
config.status: creating dmakeroot.h
config.status: creating Makefile
config.status: creating startup/config.mk
config.status: creating startup/Makefile
config.status: creating startup/unix/Makefile
config.status: creating startup/unix/linux/Makefile
config.status: creating startup/unix/solaris/Makefile
config.status: creating startup/unix/macosx/Makefile
config.status: creating startup/unix/sysvr4/Makefile
config.status: creating startup/unix/cygwin/Makefile
config.status: creating startup/unix/os2/Makefile
config.status: creating startup/winnt/Makefile
config.status: creating startup/winnt/mingw/Makefile
config.status: creating startup/winnt/msvc6/Makefile
config.status: creating tests/Makefile
config.status: creating config.h
config.status: executing depfiles commands
gmake[2]: Entering directory `/usr/local/src/libreoffice-core-3.5.0.1/dmake'
gmake  all-recursive
gmake[3]: Entering directory `/usr/local/src/libreoffice-core-3.5.0.1/dmake'
Making all in startup
gmake[4]: Entering directory
`/usr/local/src/libreoffice-core-3.5.0.1/dmake/startup'
Making all in unix
gmake[5]: Entering directory
`/usr/local/src/libreoffice-core-3.5.0.1/dmake/startup/unix'
Making all in solaris
gmake[6]: Entering directory
`/usr/local/src/libreoffice-core-3.5.0.1/dmake/startup/unix/solaris'
gmake[6]: Nothing to be done for `all'.
gmake[6]: Leaving directory
`/usr/local/src/libreoffice-core-3.5.0.1/dmake/startup/unix/solaris'
gmake[6]: Entering directory
`/usr/local/src/libreoffice-core-3.5.0.1/dmake/startup/unix'
gmake[6]: Nothing to be done for `all-am'.
gmake[6]: Leaving directory
`/usr/local/src/libreoffice-core-3.5.0.1/dmake/startup/unix'
gmake[5]: Leaving directory
`/usr/local/src/libreoffice-core-3.5.0.1/dmake/startup/unix'
gmake[5]: Entering directory
`/usr/local/src/libreoffice-core-3.5.0.1/dmake/startup'
gmake[5]: Nothing to be done for `all-am'.
gmake[5]: Leaving directory
`/usr/local/src/libreoffice-core-3.5.0.1/dmake/startup'
gmake[4]: Leaving directory
`/usr/local/src/libreoffice-core-3.5.0.1/dmake/startup'
Making all in tests
gmake[4]: Entering directory
`/usr/local/src/libreoffice-core-3.5.0.1/dmake/tests'
gmake[4]: Nothing to be done for `all'.
gmake[4]: Leaving directory
`/usr/local/src/libreoffice-core-3.5.0.1/dmake/tests'
gmake[4]: Entering directory `/usr/local/src/libreoffice-core-3.5.0.1/dmake'
depbase=`echo infer.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT infer.o -MD -MP -MF "$depbase.Tpo" -c -o infer.o infer.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo make.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT make.o -MD -MP -MF "$depbase.Tpo" -c -o make.o make.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo stat.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT stat.o -MD -MP -MF "$depbase.Tpo" -c -o stat.o stat.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo expand.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT expand.o -MD -MP -MF "$depbase.Tpo" -c -o expand.o expand.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo dmstring.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT dmstring.o -MD -MP -MF "$depbase.Tpo" -c -o dmstring.o dmstring.c;
\
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo hash.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT hash.o -MD -MP -MF "$depbase.Tpo" -c -o hash.o hash.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo dag.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT dag.o -MD -MP -MF "$depbase.Tpo" -c -o dag.o dag.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo dmake.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT dmake.o -MD -MP -MF "$depbase.Tpo" -c -o dmake.o dmake.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo path.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT path.o -MD -MP -MF "$depbase.Tpo" -c -o path.o path.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo imacs.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT imacs.o -MD -MP -MF "$depbase.Tpo" -c -o imacs.o imacs.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo sysintf.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT sysintf.o -MD -MP -MF "$depbase.Tpo" -c -o sysintf.o sysintf.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo parse.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT parse.o -MD -MP -MF "$depbase.Tpo" -c -o parse.o parse.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo getinp.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT getinp.o -MD -MP -MF "$depbase.Tpo" -c -o getinp.o getinp.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo quit.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT quit.o -MD -MP -MF "$depbase.Tpo" -c -o quit.o quit.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo state.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT state.o -MD -MP -MF "$depbase.Tpo" -c -o state.o state.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo dmdump.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT dmdump.o -MD -MP -MF "$depbase.Tpo" -c -o dmdump.o dmdump.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo macparse.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT macparse.o -MD -MP -MF "$depbase.Tpo" -c -o macparse.o macparse.c;
\
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo rulparse.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT rulparse.o -MD -MP -MF "$depbase.Tpo" -c -o rulparse.o rulparse.c;
\
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo percent.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT percent.o -MD -MP -MF "$depbase.Tpo" -c -o percent.o percent.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo function.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT function.o -MD -MP -MF "$depbase.Tpo" -c -o function.o function.c;
\
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo unix/arlib.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT unix/arlib.o -MD -MP -MF "$depbase.Tpo" -c -o unix/arlib.o
unix/arlib.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo unix/dcache.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT unix/dcache.o -MD -MP -MF "$depbase.Tpo" -c -o unix/dcache.o
unix/dcache.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo unix/dirbrk.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT unix/dirbrk.o -MD -MP -MF "$depbase.Tpo" -c -o unix/dirbrk.o
unix/dirbrk.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo unix/rmprq.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT unix/rmprq.o -MD -MP -MF "$depbase.Tpo" -c -o unix/rmprq.o
unix/rmprq.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo unix/ruletab.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT unix/ruletab.o -MD -MP -MF "$depbase.Tpo" -c -o unix/ruletab.o
unix/ruletab.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo unix/runargv.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT unix/runargv.o -MD -MP -MF "$depbase.Tpo" -c -o unix/runargv.o
unix/runargv.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
depbase=`echo unix/tempnam.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
        if gcc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./unix/solaris
-I./unix -I./unix/solaris/gnu -I./unix/solaris -I./unix      -g -O2
-MT unix/tempnam.o -MD -MP -MF "$depbase.Tpo" -c -o unix/tempnam.o
unix/tempnam.c; \
        then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f
"$depbase.Tpo"; exit 1; fi
gcc  -g -O2   -o dmake  infer.o make.o stat.o expand.o dmstring.o
hash.o dag.o dmake.o path.o imacs.o sysintf.o parse.o getinp.o quit.o
state.o dmdump.o macparse.o rulparse.o percent.o function.o
unix/arlib.o unix/dcache.o unix/dirbrk.o unix/rmprq.o unix/ruletab.o
unix/runargv.o unix/tempnam.o
gmake[4]: Leaving directory `/usr/local/src/libreoffice-core-3.5.0.1/dmake'
gmake[3]: Leaving directory `/usr/local/src/libreoffice-core-3.5.0.1/dmake'
gmake[2]: Leaving directory `/usr/local/src/libreoffice-core-3.5.0.1/dmake'

dmake has been successfully built

dmake copied to /usr/local/src/libreoffice-core-3.5.0.1/solenv/unxsogi/bin/dmake
cd /usr/local/src/libreoffice-core-3.5.0.1 && ./download ./ooo.lst &&
touch /usr/local/src/libreoffice-core-3.5.0.1/src.downloaded
48a9f787f43a09c0a9b7b00cd1fddbbf-hyphen-2.7.1.tar.gz
--2012-01-25 18:49:10--
http://dev-www.libreoffice.org/src/48a9f787f43a09c0a9b7b00cd1fddbbf-hyphen-2.7.1.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 612842 (598K) [application/x-gzip]
Saving to: `48a9f787f43a09c0a9b7b00cd1fddbbf-hyphen-2.7.1.tar.gz'

     0K ........ .                                           100%  276K=2.2s

2012-01-25 18:49:13 (276 KB/s) -
`48a9f787f43a09c0a9b7b00cd1fddbbf-hyphen-2.7.1.tar.gz' saved
[612842/612842]

63ddc5116488985e820075e65fbe6aa4-openssl-0.9.8o.tar.gz
--2012-01-25 18:49:13--
http://dev-www.libreoffice.org/src/63ddc5116488985e820075e65fbe6aa4-openssl-0.9.8o.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 3772542 (3.6M) [application/x-gzip]
Saving to: `63ddc5116488985e820075e65fbe6aa4-openssl-0.9.8o.tar.gz'

     0K ........ ........ ........ ........ ........ ........ 83%  529K 1s
  3072K ........ .                                           100%  707K=6.7s

2012-01-25 18:49:20 (552 KB/s) -
`63ddc5116488985e820075e65fbe6aa4-openssl-0.9.8o.tar.gz' saved
[3772542/3772542]

db5ffcd50064421176e8afb7b85fd1a7-pixman-0.24.0.tar.bz2
--2012-01-25 18:49:20--
http://dev-www.libreoffice.org/src/db5ffcd50064421176e8afb7b85fd1a7-pixman-0.24.0.tar.bz2
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 467328 (456K) [application/x-bzip]
Saving to: `db5ffcd50064421176e8afb7b85fd1a7-pixman-0.24.0.tar.bz2'

     0K .......                                              100%  248K=1.8s

2012-01-25 18:49:22 (248 KB/s) -
`db5ffcd50064421176e8afb7b85fd1a7-pixman-0.24.0.tar.bz2' saved
[467328/467328]

0b49ede71c21c0599b0cc19b353a6cb3-README_apache-commons.txt
--2012-01-25 18:49:22--
http://dev-www.libreoffice.org/src/0b49ede71c21c0599b0cc19b353a6cb3-README_apache-commons.txt
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 241 [text/plain]
Saving to: `0b49ede71c21c0599b0cc19b353a6cb3-README_apache-commons.txt'

     0K                                                      100% 9.91M=0s

2012-01-25 18:49:22 (9.91 MB/s) -
`0b49ede71c21c0599b0cc19b353a6cb3-README_apache-commons.txt' saved
[241/241]

e1c178b18f130b40494561f02bc1a948-libexttextcat-3.2.0.tar.bz2
--2012-01-25 18:49:23--
http://dev-www.libreoffice.org/src/e1c178b18f130b40494561f02bc1a948-libexttextcat-3.2.0.tar.bz2
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 947288 (925K) [application/x-bzip]
Saving to: `e1c178b18f130b40494561f02bc1a948-libexttextcat-3.2.0.tar.bz2'

     0K ........ ......                                      100%  365K=2.5s

2012-01-25 18:49:25 (365 KB/s) -
`e1c178b18f130b40494561f02bc1a948-libexttextcat-3.2.0.tar.bz2' saved
[947288/947288]

17410483b5b5f267aa18b7e00b65e6e0-hsqldb_1_8_0.zip
--2012-01-25 18:49:25--
http://dev-www.libreoffice.org/src/17410483b5b5f267aa18b7e00b65e6e0-hsqldb_1_8_0.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 3519470 (3.4M) [application/zip]
Saving to: `17410483b5b5f267aa18b7e00b65e6e0-hsqldb_1_8_0.zip'

     0K ........ ........ ........ ........ ........ ........ 89%  577K 1s
  3072K .....                                                100%  577K=6.0s

2012-01-25 18:49:32 (577 KB/s) -
`17410483b5b5f267aa18b7e00b65e6e0-hsqldb_1_8_0.zip' saved
[3519470/3519470]

1756c4fa6c616ae15973c104cd8cb256-Adobe-Core35_AFMs-314.tar.gz
--2012-01-25 18:49:32--
http://dev-www.libreoffice.org/src/1756c4fa6c616ae15973c104cd8cb256-Adobe-Core35_AFMs-314.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 315122 (308K) [application/x-gzip]
Saving to: `1756c4fa6c616ae15973c104cd8cb256-Adobe-Core35_AFMs-314.tar.gz'

     0K ....                                                 100%  206K=1.5s

2012-01-25 18:49:34 (206 KB/s) -
`1756c4fa6c616ae15973c104cd8cb256-Adobe-Core35_AFMs-314.tar.gz' saved
[315122/315122]

18f577b374d60b3c760a3a3350407632-STLport-4.5.tar.gz
--2012-01-25 18:49:34--
http://dev-www.libreoffice.org/src/18f577b374d60b3c760a3a3350407632-STLport-4.5.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 728789 (712K) [application/x-gzip]
Saving to: `18f577b374d60b3c760a3a3350407632-STLport-4.5.tar.gz'

     0K ........ ...                                         100%  324K=2.2s

2012-01-25 18:49:36 (324 KB/s) -
`18f577b374d60b3c760a3a3350407632-STLport-4.5.tar.gz' saved
[728789/728789]

1f24ab1d39f4a51faf22244c94a6203f-xmlsec1-1.2.14.tar.gz
--2012-01-25 18:49:36--
http://dev-www.libreoffice.org/src/1f24ab1d39f4a51faf22244c94a6203f-xmlsec1-1.2.14.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1652670 (1.6M) [application/x-gzip]
Saving to: `1f24ab1d39f4a51faf22244c94a6203f-xmlsec1-1.2.14.tar.gz'

     0K ........ ........ ........ .                         100%  463K=3.5s

2012-01-25 18:49:40 (463 KB/s) -
`1f24ab1d39f4a51faf22244c94a6203f-xmlsec1-1.2.14.tar.gz' saved
[1652670/1652670]

24be19595acad0a2cae931af77a0148a-LICENSE_source-9.0.0.7-bj.html
--2012-01-25 18:49:40--
http://dev-www.libreoffice.org/src/24be19595acad0a2cae931af77a0148a-LICENSE_source-9.0.0.7-bj.html
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 20335 (20K) [text/html]
Saving to: `24be19595acad0a2cae931af77a0148a-LICENSE_source-9.0.0.7-bj.html'

     0K                                                      100% 42.8K=0.5s

2012-01-25 18:49:41 (42.8 KB/s) -
`24be19595acad0a2cae931af77a0148a-LICENSE_source-9.0.0.7-bj.html'
saved [20335/20335]

26b3e95ddf3d9c077c480ea45874b3b8-lp_solve_5.5.tar.gz
--2012-01-25 18:49:41--
http://dev-www.libreoffice.org/src/26b3e95ddf3d9c077c480ea45874b3b8-lp_solve_5.5.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 769268 (751K) [application/x-gzip]
Saving to: `26b3e95ddf3d9c077c480ea45874b3b8-lp_solve_5.5.tar.gz'

     0K ........ ...                                         100%  336K=2.2s

2012-01-25 18:49:44 (336 KB/s) -
`26b3e95ddf3d9c077c480ea45874b3b8-lp_solve_5.5.tar.gz' saved
[769268/769268]

284e768eeda0e2898b0d5bf7e26a016e-raptor-1.4.18.tar.gz
--2012-01-25 18:49:44--
http://dev-www.libreoffice.org/src/284e768eeda0e2898b0d5bf7e26a016e-raptor-1.4.18.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1657246 (1.6M) [application/x-gzip]
Saving to: `284e768eeda0e2898b0d5bf7e26a016e-raptor-1.4.18.tar.gz'

     0K ........ ........ ........ .                         100%  470K=3.4s

2012-01-25 18:49:48 (470 KB/s) -
`284e768eeda0e2898b0d5bf7e26a016e-raptor-1.4.18.tar.gz' saved
[1657246/1657246]

2a177023f9ea8ec8bd00837605c5df1b-jakarta-tomcat-5.0.30-src.tar.gz
--2012-01-25 18:49:48--
http://dev-www.libreoffice.org/src/2a177023f9ea8ec8bd00837605c5df1b-jakarta-tomcat-5.0.30-src.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 3568559 (3.4M) [application/x-gzip]
Saving to: `2a177023f9ea8ec8bd00837605c5df1b-jakarta-tomcat-5.0.30-src.tar.gz'

     0K ........ ........ ........ ........ ........ ........ 88%  552K 1s
  3072K ......                                               100%  602K=6.3s

2012-01-25 18:49:55 (557 KB/s) -
`2a177023f9ea8ec8bd00837605c5df1b-jakarta-tomcat-5.0.30-src.tar.gz'
saved [3568559/3568559]

2ae988b339daec234019a7066f96733e-commons-lang-2.3-src.tar.gz
--2012-01-25 18:49:55--
http://dev-www.libreoffice.org/src/2ae988b339daec234019a7066f96733e-commons-lang-2.3-src.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 474681 (464K) [application/x-gzip]
Saving to: `2ae988b339daec234019a7066f96733e-commons-lang-2.3-src.tar.gz'

     0K .......                                              100%  266K=1.7s

2012-01-25 18:49:57 (266 KB/s) -
`2ae988b339daec234019a7066f96733e-commons-lang-2.3-src.tar.gz' saved
[474681/474681]

2c9b0f83ed5890af02c0df1c1776f39b-commons-httpclient-3.1-src.tar.gz
--2012-01-25 18:49:57--
http://dev-www.libreoffice.org/src/2c9b0f83ed5890af02c0df1c1776f39b-commons-httpclient-3.1-src.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1882664 (1.8M) [application/x-gzip]
Saving to: `2c9b0f83ed5890af02c0df1c1776f39b-commons-httpclient-3.1-src.tar.gz'

     0K ........ ........ ........ ....                      100%  499K=3.7s

2012-01-25 18:50:01 (499 KB/s) -
`2c9b0f83ed5890af02c0df1c1776f39b-commons-httpclient-3.1-src.tar.gz'
saved [1882664/1882664]

0be45d54cc5e1c2e3102e32b8c190346-liberation-fonts-ttf-1.07.1.tar.gz
--2012-01-25 18:50:01--
http://dev-www.libreoffice.org/src/0be45d54cc5e1c2e3102e32b8c190346-liberation-fonts-ttf-1.07.1.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1326668 (1.3M) [application/x-gzip]
Saving to: `0be45d54cc5e1c2e3102e32b8c190346-liberation-fonts-ttf-1.07.1.tar.gz'

     0K ........ ........ ....                               100%  428K=3.0s

2012-01-25 18:50:04 (428 KB/s) -
`0be45d54cc5e1c2e3102e32b8c190346-liberation-fonts-ttf-1.07.1.tar.gz'
saved [1326668/1326668]

35c94d2df8893241173de1d16b6034c0-swingExSrc.zip
--2012-01-25 18:50:05--
http://dev-www.libreoffice.org/src/35c94d2df8893241173de1d16b6034c0-swingExSrc.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 9796 (9.6K) [application/zip]
Saving to: `35c94d2df8893241173de1d16b6034c0-swingExSrc.zip'

     0K                                                      100% 32.9K=0.3s

2012-01-25 18:50:05 (32.9 KB/s) -
`35c94d2df8893241173de1d16b6034c0-swingExSrc.zip' saved [9796/9796]

35efabc239af896dfb79be7ebdd6e6b9-gentiumbasic-fonts-1.10.zip
--2012-01-25 18:50:05--
http://dev-www.libreoffice.org/src/35efabc239af896dfb79be7ebdd6e6b9-gentiumbasic-fonts-1.10.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 867405 (847K) [application/zip]
Saving to: `35efabc239af896dfb79be7ebdd6e6b9-gentiumbasic-fonts-1.10.zip'

     0K ........ .....                                       100%  360K=2.4s

2012-01-25 18:50:08 (360 KB/s) -
`35efabc239af896dfb79be7ebdd6e6b9-gentiumbasic-fonts-1.10.zip' saved
[867405/867405]

39bb3fcea1514f1369fcfc87542390fd-sacjava-1.3.zip
--2012-01-25 18:50:08--
http://dev-www.libreoffice.org/src/39bb3fcea1514f1369fcfc87542390fd-sacjava-1.3.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 153157 (150K) [application/zip]
Saving to: `39bb3fcea1514f1369fcfc87542390fd-sacjava-1.3.zip'

     0K ..                                                   100%  124K=1.2s

2012-01-25 18:50:10 (124 KB/s) -
`39bb3fcea1514f1369fcfc87542390fd-sacjava-1.3.zip' saved
[153157/153157]

3ade8cfe7e59ca8e65052644fed9fca4-epm-3.7.tar.gz
--2012-01-25 18:50:10--
http://dev-www.libreoffice.org/src/3ade8cfe7e59ca8e65052644fed9fca4-epm-3.7.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 463264 (452K) [application/x-gzip]
Saving to: `3ade8cfe7e59ca8e65052644fed9fca4-epm-3.7.tar.gz'

     0K .......                                              100%  245K=1.8s

2012-01-25 18:50:12 (245 KB/s) -
`3ade8cfe7e59ca8e65052644fed9fca4-epm-3.7.tar.gz' saved
[463264/463264]

3c219630e4302863a9a83d0efde889db-commons-logging-1.1.1-src.tar.gz
--2012-01-25 18:50:12--
http://dev-www.libreoffice.org/src/3c219630e4302863a9a83d0efde889db-commons-logging-1.1.1-src.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 189448 (185K) [application/x-gzip]
Saving to: `3c219630e4302863a9a83d0efde889db-commons-logging-1.1.1-src.tar.gz'

     0K ..                                                   100%  139K=1.3s

2012-01-25 18:50:14 (139 KB/s) -
`3c219630e4302863a9a83d0efde889db-commons-logging-1.1.1-src.tar.gz'
saved [189448/189448]

48470d662650c3c074e1c3fabbc67bbd-README_source-9.0.0.7-bj.txt
--2012-01-25 18:50:14--
http://dev-www.libreoffice.org/src/48470d662650c3c074e1c3fabbc67bbd-README_source-9.0.0.7-bj.txt
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 441 [text/plain]
Saving to: `48470d662650c3c074e1c3fabbc67bbd-README_source-9.0.0.7-bj.txt'

     0K                                                      100% 13.9M=0s

2012-01-25 18:50:14 (13.9 MB/s) -
`48470d662650c3c074e1c3fabbc67bbd-README_source-9.0.0.7-bj.txt' saved
[441/441]

48d8169acc35f97e05d8dcdfd45be7f2-lucene-2.3.2.tar.gz
--2012-01-25 18:50:14--
http://dev-www.libreoffice.org/src/48d8169acc35f97e05d8dcdfd45be7f2-lucene-2.3.2.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4603398 (4.4M) [application/x-gzip]
Saving to: `48d8169acc35f97e05d8dcdfd45be7f2-lucene-2.3.2.tar.gz'

     0K ........ ........ ........ ........ ........ ........ 68%  541K 3s
  3072K ........ ........ ......                             100%  686K=7.8s

2012-01-25 18:50:22 (580 KB/s) -
`48d8169acc35f97e05d8dcdfd45be7f2-lucene-2.3.2.tar.gz' saved
[4603398/4603398]

4a660ce8466c9df01f19036435425c3a-glibc-2.1.3-stub.tar.gz
--2012-01-25 18:50:22--
http://dev-www.libreoffice.org/src/4a660ce8466c9df01f19036435425c3a-glibc-2.1.3-stub.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 22508 (22K) [application/x-gzip]
Saving to: `4a660ce8466c9df01f19036435425c3a-glibc-2.1.3-stub.tar.gz'

     0K                                                      100% 48.3K=0.5s

2012-01-25 18:50:23 (48.3 KB/s) -
`4a660ce8466c9df01f19036435425c3a-glibc-2.1.3-stub.tar.gz' saved
[22508/22508]

f101a9e88b783337b20b2e26dfd26d5f-cairo-1.10.2.tar.gz
--2012-01-25 18:50:23--
http://dev-www.libreoffice.org/src/f101a9e88b783337b20b2e26dfd26d5f-cairo-1.10.2.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 23558405 (22M) [application/x-gzip]
Saving to: `f101a9e88b783337b20b2e26dfd26d5f-cairo-1.10.2.tar.gz'

     0K ........ ........ ........ ........ ........ ........ 13%  563K 35s
  3072K ........ ........ ........ ........ ........ ........ 26%  685K 27s
  6144K ........ ........ ........ ........ ........ ........ 40%  682K 22s
  9216K ........ ........ ........ ........ ........ ........ 53%  704K 16s
 12288K ........ ........ ........ ........ ........ ........ 66%  691K 12s
 15360K ........ ........ ........ ........ ........ ........ 80%  663K 7s
 18432K ........ ........ ........ ........ ........ ........ 93%  702K 2s
 21504K ........ ........ .......                            100%  640K=35s

2012-01-25 18:50:58 (665 KB/s) -
`f101a9e88b783337b20b2e26dfd26d5f-cairo-1.10.2.tar.gz' saved
[23558405/23558405]

599dc4cc65a07ee868cf92a667a913d2-xpdf-3.02.tar.gz
--2012-01-25 18:50:59--
http://dev-www.libreoffice.org/src/599dc4cc65a07ee868cf92a667a913d2-xpdf-3.02.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 674912 (659K) [application/x-gzip]
Saving to: `599dc4cc65a07ee868cf92a667a913d2-xpdf-3.02.tar.gz'

     0K ........ ..                                          100%  318K=2.1s

2012-01-25 18:51:01 (318 KB/s) -
`599dc4cc65a07ee868cf92a667a913d2-xpdf-3.02.tar.gz' saved
[674912/674912]

7740a8ec23878a2f50120e1faa2730f2-libxml2-2.7.6.tar.gz
--2012-01-25 18:51:01--
http://dev-www.libreoffice.org/src/7740a8ec23878a2f50120e1faa2730f2-libxml2-2.7.6.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4854591 (4.6M) [application/x-gzip]
Saving to: `7740a8ec23878a2f50120e1faa2730f2-libxml2-2.7.6.tar.gz'

     0K ........ ........ ........ ........ ........ ........ 64%  571K 3s
  3072K ........ ........ ........ ..                        100%  641K=8.0s

2012-01-25 18:51:10 (594 KB/s) -
`7740a8ec23878a2f50120e1faa2730f2-libxml2-2.7.6.tar.gz' saved
[4854591/4854591]

7376930b0d3f3d77a685d94c4a3acda8-STLport-4.5-0119.tar.gz
--2012-01-25 18:51:10--
http://dev-www.libreoffice.org/src/7376930b0d3f3d77a685d94c4a3acda8-STLport-4.5-0119.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2424604 (2.3M) [application/x-gzip]
Saving to: `7376930b0d3f3d77a685d94c4a3acda8-STLport-4.5-0119.tar.gz'

     0K ........ ........ ........ ........ ....             100%  513K=4.6s

2012-01-25 18:51:15 (513 KB/s) -
`7376930b0d3f3d77a685d94c4a3acda8-STLport-4.5-0119.tar.gz' saved
[2424604/2424604]

798b2ffdc8bcfe7bca2cf92b62caf685-rhino1_5R5.zip
--2012-01-25 18:51:15--
http://dev-www.libreoffice.org/src/798b2ffdc8bcfe7bca2cf92b62caf685-rhino1_5R5.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1521926 (1.5M) [application/zip]
Saving to: `798b2ffdc8bcfe7bca2cf92b62caf685-rhino1_5R5.zip'

     0K ........ ........ .......                            100%  442K=3.4s

2012-01-25 18:51:19 (442 KB/s) -
`798b2ffdc8bcfe7bca2cf92b62caf685-rhino1_5R5.zip' saved
[1521926/1521926]

ecb2e37e45c9933e2a963cabe03670ab-curl-7.19.7.tar.gz
--2012-01-25 18:51:19--
http://dev-www.libreoffice.org/src/ecb2e37e45c9933e2a963cabe03670ab-curl-7.19.7.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 3013744 (2.9M) [application/x-gzip]
Saving to: `ecb2e37e45c9933e2a963cabe03670ab-curl-7.19.7.tar.gz'

     0K ........ ........ ........ ........ ........ .....   100%  532K=5.5s

2012-01-25 18:51:24 (532 KB/s) -
`ecb2e37e45c9933e2a963cabe03670ab-curl-7.19.7.tar.gz' saved
[3013744/3013744]

8294d6c42e3553229af9934c5c0ed997-stax-api-1.0-2-sources.jar
--2012-01-25 18:51:25--
http://dev-www.libreoffice.org/src/8294d6c42e3553229af9934c5c0ed997-stax-api-1.0-2-sources.jar
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 56041 (55K) [application/x-java-archive]
Saving to: `8294d6c42e3553229af9934c5c0ed997-stax-api-1.0-2-sources.jar'

     0K                                                      100% 68.3K=0.8s

2012-01-25 18:51:26 (68.3 KB/s) -
`8294d6c42e3553229af9934c5c0ed997-stax-api-1.0-2-sources.jar' saved
[56041/56041]

bd30e9cf5523cdfc019b94f5e1d7fd19-cppunit-1.12.1.tar.gz
--2012-01-25 18:51:26--
http://dev-www.libreoffice.org/src/bd30e9cf5523cdfc019b94f5e1d7fd19-cppunit-1.12.1.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 762803 (745K) [application/x-gzip]
Saving to: `bd30e9cf5523cdfc019b94f5e1d7fd19-cppunit-1.12.1.tar.gz'

     0K ........ ...                                         100%  343K=2.2s

2012-01-25 18:51:28 (343 KB/s) -
`bd30e9cf5523cdfc019b94f5e1d7fd19-cppunit-1.12.1.tar.gz' saved
[762803/762803]

a169ab152209200a7bad29a275cb0333-seamonkey-1.1.14.source.tar.gz
--2012-01-25 18:51:28--
http://dev-www.libreoffice.org/src/a169ab152209200a7bad29a275cb0333-seamonkey-1.1.14.source.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 49233648 (47M) [application/x-gzip]
Saving to: `a169ab152209200a7bad29a275cb0333-seamonkey-1.1.14.source.tar.gz'

     0K ........ ........ ........ ........ ........ ........  6%  550K 82s
  3072K ........ ........ ........ ........ ........ ........ 12%  700K 68s
  6144K ........ ........ ........ ........ ........ ........ 19%  680K 61s
  9216K ........ ........ ........ ........ ........ ........ 25%  685K 55s
 12288K ........ ........ ........ ........ ........ ........ 31%  717K 50s
 15360K ........ ........ ........ ........ ........ ........ 38%  665K 45s
 18432K ........ ........ ........ ........ ........ ........ 44%  689K 40s
 21504K ........ ........ ........ ........ ........ ........ 51%  698K 35s
 24576K ........ ........ ........ ........ ........ ........ 57%  690K 30s
 27648K ........ ........ ........ ........ ........ ........ 63%  688K 26s
 30720K ........ ........ ........ ........ ........ ........ 70%  603K 21s
 33792K ........ ........ ........ ........ ........ ........ 76%  619K 17s
 36864K ........ ........ ........ ........ ........ ........ 83%  682K 12s
 39936K ........ ........ ........ ........ ........ ........ 89%  649K 8s
 43008K ........ ........ ........ ........ ........ ........ 95%  678K 3s
 46080K ........ ........ ........ .......                   100%  650K=73s

2012-01-25 18:52:41 (663 KB/s) -
`a169ab152209200a7bad29a275cb0333-seamonkey-1.1.14.source.tar.gz'
saved [49233648/49233648]

a4d9b30810a434a3ed39fc0003bbd637-LICENSE_stax-api-1.0-2-sources.html
--2012-01-25 18:52:42--
http://dev-www.libreoffice.org/src/a4d9b30810a434a3ed39fc0003bbd637-LICENSE_stax-api-1.0-2-sources.html
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 44798 (44K) [text/html]
Saving to: `a4d9b30810a434a3ed39fc0003bbd637-LICENSE_stax-api-1.0-2-sources.html'

     0K                                                      100% 63.7K=0.7s

2012-01-25 18:52:43 (63.7 KB/s) -
`a4d9b30810a434a3ed39fc0003bbd637-LICENSE_stax-api-1.0-2-sources.html'
saved [44798/44798]

a7983f859eafb2677d7ff386a023bc40-xsltml_2.1.2.zip
--2012-01-25 18:52:43--
http://dev-www.libreoffice.org/src/a7983f859eafb2677d7ff386a023bc40-xsltml_2.1.2.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 23150 (23K) [application/zip]
Saving to: `a7983f859eafb2677d7ff386a023bc40-xsltml_2.1.2.zip'

     0K                                                      100% 49.6K=0.5s

2012-01-25 18:52:44 (49.6 KB/s) -
`a7983f859eafb2677d7ff386a023bc40-xsltml_2.1.2.zip' saved
[23150/23150]

ada24d37d8d638b3d8a9985e80bc2978-source-9.0.0.7-bj.zip
--2012-01-25 18:52:44--
http://dev-www.libreoffice.org/src/ada24d37d8d638b3d8a9985e80bc2978-source-9.0.0.7-bj.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2732347 (2.6M) [application/zip]
Saving to: `ada24d37d8d638b3d8a9985e80bc2978-source-9.0.0.7-bj.zip'

     0K ........ ........ ........ ........ ........ .       100%  436K=6.1s

2012-01-25 18:52:50 (436 KB/s) -
`ada24d37d8d638b3d8a9985e80bc2978-source-9.0.0.7-bj.zip' saved
[2732347/2732347]

af3c3acf618de6108d65fcdc92b492e1-commons-codec-1.3-src.tar.gz
--2012-01-25 18:52:50--
http://dev-www.libreoffice.org/src/af3c3acf618de6108d65fcdc92b492e1-commons-codec-1.3-src.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 80427 (79K) [application/x-gzip]
Saving to: `af3c3acf618de6108d65fcdc92b492e1-commons-codec-1.3-src.tar.gz'

     0K .                                                    100% 80.8K=1.0s

2012-01-25 18:52:52 (80.8 KB/s) -
`af3c3acf618de6108d65fcdc92b492e1-commons-codec-1.3-src.tar.gz' saved
[80427/80427]

bc702168a2af16869201dbe91e46ae48-LICENSE_Python-2.6.1
--2012-01-25 18:52:52--
http://dev-www.libreoffice.org/src/bc702168a2af16869201dbe91e46ae48-LICENSE_Python-2.6.1
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 13176 (13K) [text/plain]
Saving to: `bc702168a2af16869201dbe91e46ae48-LICENSE_Python-2.6.1'

     0K                                                      100% 37.7K=0.3s

2012-01-25 18:52:53 (37.7 KB/s) -
`bc702168a2af16869201dbe91e46ae48-LICENSE_Python-2.6.1' saved
[13176/13176]

c441926f3a552ed3e5b274b62e86af16-STLport-4.0.tar.gz
--2012-01-25 18:52:53--
http://dev-www.libreoffice.org/src/c441926f3a552ed3e5b274b62e86af16-STLport-4.0.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 686207 (670K) [application/x-gzip]
Saving to: `c441926f3a552ed3e5b274b62e86af16-STLport-4.0.tar.gz'

     0K ........ ..                                          100%  261K=2.6s

2012-01-25 18:52:56 (261 KB/s) -
`c441926f3a552ed3e5b274b62e86af16-STLport-4.0.tar.gz' saved
[686207/686207]

ca66e26082cab8bb817185a116db809b-redland-1.0.8.tar.gz
--2012-01-25 18:52:56--
http://dev-www.libreoffice.org/src/ca66e26082cab8bb817185a116db809b-redland-1.0.8.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 3989935 (3.8M) [application/x-gzip]
Saving to: `ca66e26082cab8bb817185a116db809b-redland-1.0.8.tar.gz'

     0K ........ ........ ........ ........ ........ ........ 78%  471K 2s
  3072K ........ ....                                        100%  684K=7.7s

2012-01-25 18:53:04 (504 KB/s) -
`ca66e26082cab8bb817185a116db809b-redland-1.0.8.tar.gz' saved
[3989935/3989935]

d4c4d91ab3a8e52a2e69d48d34ef4df4-core.zip
--2012-01-25 18:53:04--
http://dev-www.libreoffice.org/src/d4c4d91ab3a8e52a2e69d48d34ef4df4-core.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 764464 (747K) [application/zip]
Saving to: `d4c4d91ab3a8e52a2e69d48d34ef4df4-core.zip'

     0K ........ ...                                         100%  277K=2.7s

2012-01-25 18:53:07 (277 KB/s) -
`d4c4d91ab3a8e52a2e69d48d34ef4df4-core.zip' saved [764464/764464]

d70951c80dabecc2892c919ff5d07172-db-4.7.25.NC-custom.tar.gz
--2012-01-25 18:53:07--
http://dev-www.libreoffice.org/src/d70951c80dabecc2892c919ff5d07172-db-4.7.25.NC-custom.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 5515376 (5.3M) [application/x-gzip]
Saving to: `d70951c80dabecc2892c919ff5d07172-db-4.7.25.NC-custom.tar.gz'

     0K ........ ........ ........ ........ ........ ........ 57%  459K 5s
  3072K ........ ........ ........ ........ ....             100%  735K=9.8s

2012-01-25 18:53:17 (547 KB/s) -
`d70951c80dabecc2892c919ff5d07172-db-4.7.25.NC-custom.tar.gz' saved
[5515376/5515376]

e0707ff896045731ff99e99799606441-README_db-4.7.25.NC-custom.txt
--2012-01-25 18:53:17--
http://dev-www.libreoffice.org/src/e0707ff896045731ff99e99799606441-README_db-4.7.25.NC-custom.txt
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 175 [text/plain]
Saving to: `e0707ff896045731ff99e99799606441-README_db-4.7.25.NC-custom.txt'

     0K                                                      100% 6.17M=0s

2012-01-25 18:53:18 (6.17 MB/s) -
`e0707ff896045731ff99e99799606441-README_db-4.7.25.NC-custom.txt'
saved [175/175]

e81c2f0953aa60f8062c05a4673f2be0-Python-2.6.1.tar.bz2
--2012-01-25 18:53:18--
http://dev-www.libreoffice.org/src/e81c2f0953aa60f8062c05a4673f2be0-Python-2.6.1.tar.bz2
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 10960385 (10M) [application/x-bzip]
Saving to: `e81c2f0953aa60f8062c05a4673f2be0-Python-2.6.1.tar.bz2'

     0K ........ ........ ........ ........ ........ ........ 28%  471K 16s
  3072K ........ ........ ........ ........ ........ ........ 57%  699K 8s
  6144K ........ ........ ........ ........ ........ ........ 86%  685K 2s
  9216K ........ ........ .......                            100%  718K=17s

2012-01-25 18:53:36 (613 KB/s) -
`e81c2f0953aa60f8062c05a4673f2be0-Python-2.6.1.tar.bz2' saved
[10960385/10960385]

e61d0364a30146aaa3001296f853b2b9-libxslt-1.1.26.tar.gz
--2012-01-25 18:53:36--
http://dev-www.libreoffice.org/src/e61d0364a30146aaa3001296f853b2b9-libxslt-1.1.26.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 3401513 (3.2M) [application/x-gzip]
Saving to: `e61d0364a30146aaa3001296f853b2b9-libxslt-1.1.26.tar.gz'

     0K ........ ........ ........ ........ ........ ........ 92%  485K 1s
  3072K ...                                                  100%  721K=6.7s

2012-01-25 18:53:43 (497 KB/s) -
`e61d0364a30146aaa3001296f853b2b9-libxslt-1.1.26.tar.gz' saved
[3401513/3401513]

ea570af93c284aa9e5621cd563f54f4d-bsh-2.0b1-src.tar.gz
--2012-01-25 18:53:43--
http://dev-www.libreoffice.org/src/ea570af93c284aa9e5621cd563f54f4d-bsh-2.0b1-src.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 726942 (710K) [application/x-gzip]
Saving to: `ea570af93c284aa9e5621cd563f54f4d-bsh-2.0b1-src.tar.gz'

     0K ........ ...                                         100%  293K=2.4s

2012-01-25 18:53:46 (293 KB/s) -
`ea570af93c284aa9e5621cd563f54f4d-bsh-2.0b1-src.tar.gz' saved
[726942/726942]

ea91f2fb4212a21d708aced277e6e85a-vigra1.4.0.tar.gz
--2012-01-25 18:53:46--
http://dev-www.libreoffice.org/src/ea91f2fb4212a21d708aced277e6e85a-vigra1.4.0.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 12735186 (12M) [application/x-gzip]
Saving to: `ea91f2fb4212a21d708aced277e6e85a-vigra1.4.0.tar.gz'

     0K ........ ........ ........ ........ ........ ........ 24%  459K 20s
  3072K ........ ........ ........ ........ ........ ........ 49%  684K 11s
  6144K ........ ........ ........ ........ ........ ........ 74%  710K 5s
  9216K ........ ........ ........ ........ ........ ........ 98%  692K 0s
 12288K ..                                                   100%  657K=20s

2012-01-25 18:54:07 (616 KB/s) -
`ea91f2fb4212a21d708aced277e6e85a-vigra1.4.0.tar.gz' saved
[12735186/12735186]

ee8b492592568805593f81f8cdf2a04c-expat-2.0.1.tar.gz
--2012-01-25 18:54:07--
http://dev-www.libreoffice.org/src/ee8b492592568805593f81f8cdf2a04c-expat-2.0.1.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 446456 (436K) [application/x-gzip]
Saving to: `ee8b492592568805593f81f8cdf2a04c-expat-2.0.1.tar.gz'

     0K ......                                               100%  237K=1.8s

2012-01-25 18:54:09 (237 KB/s) -
`ee8b492592568805593f81f8cdf2a04c-expat-2.0.1.tar.gz' saved
[446456/446456]

fb7ba5c2182be4e73748859967455455-README_stax-api-1.0-2-sources.txt
--2012-01-25 18:54:09--
http://dev-www.libreoffice.org/src/fb7ba5c2182be4e73748859967455455-README_stax-api-1.0-2-sources.txt
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 559 [text/plain]
Saving to: `fb7ba5c2182be4e73748859967455455-README_stax-api-1.0-2-sources.txt'

     0K                                                      100% 8.48M=0s

2012-01-25 18:54:10 (8.48 MB/s) -
`fb7ba5c2182be4e73748859967455455-README_stax-api-1.0-2-sources.txt'
saved [559/559]

fca8706f2c4619e2fa3f8f42f8fc1e9d-rasqal-0.9.16.tar.gz
--2012-01-25 18:54:10--
http://dev-www.libreoffice.org/src/fca8706f2c4619e2fa3f8f42f8fc1e9d-rasqal-0.9.16.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1117561 (1.1M) [application/x-gzip]
Saving to: `fca8706f2c4619e2fa3f8f42f8fc1e9d-rasqal-0.9.16.tar.gz'

     0K ........ ........ .                                  100%  358K=3.0s

2012-01-25 18:54:13 (358 KB/s) -
`fca8706f2c4619e2fa3f8f42f8fc1e9d-rasqal-0.9.16.tar.gz' saved
[1117561/1117561]

fdb27bfe2dbe2e7b57ae194d9bf36bab-SampleICC-1.3.2.tar.gz
--2012-01-25 18:54:13--
http://dev-www.libreoffice.org/src/fdb27bfe2dbe2e7b57ae194d9bf36bab-SampleICC-1.3.2.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 547217 (534K) [application/x-gzip]
Saving to: `fdb27bfe2dbe2e7b57ae194d9bf36bab-SampleICC-1.3.2.tar.gz'

     0K ........                                             100%  261K=2.0s

2012-01-25 18:54:17 (261 KB/s) -
`fdb27bfe2dbe2e7b57ae194d9bf36bab-SampleICC-1.3.2.tar.gz' saved
[547217/547217]

f872f4ac066433d8ff92f5e316b36ff9-dejavu-fonts-ttf-2.33.zip
--2012-01-25 18:54:17--
http://dev-www.libreoffice.org/src/f872f4ac066433d8ff92f5e316b36ff9-dejavu-fonts-ttf-2.33.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 5008644 (4.8M) [application/zip]
Saving to: `f872f4ac066433d8ff92f5e316b36ff9-dejavu-fonts-ttf-2.33.zip'

     0K ........ ........ ........ ........ ........ ........ 62%  480K 4s
  3072K ........ ........ ........ ....                      100%  674K=9.1s

2012-01-25 18:54:26 (538 KB/s) -
`f872f4ac066433d8ff92f5e316b36ff9-dejavu-fonts-ttf-2.33.zip' saved
[5008644/5008644]

0981bda6548a8c8233ffce2b6e4b2a23-mysql-connector-c++-1.1.0.tar.gz
--2012-01-25 18:54:26--
http://dev-www.libreoffice.org/src/0981bda6548a8c8233ffce2b6e4b2a23-mysql-connector-c++-1.1.0.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 467089 (456K) [application/x-gzip]
Saving to: `0981bda6548a8c8233ffce2b6e4b2a23-mysql-connector-c++-1.1.0.tar.gz'

     0K .......                                              100%  229K=2.0s

2012-01-25 18:54:29 (229 KB/s) -
`0981bda6548a8c8233ffce2b6e4b2a23-mysql-connector-c++-1.1.0.tar.gz'
saved [467089/467089]

061a9f17323117c9358ed60f33ecff78-postgresql-9.1.1.tar.bz2
--2012-01-25 18:54:29--
http://dev-www.libreoffice.org/src/061a9f17323117c9358ed60f33ecff78-postgresql-9.1.1.tar.bz2
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 14884071 (14M) [application/x-bzip]
Saving to: `061a9f17323117c9358ed60f33ecff78-postgresql-9.1.1.tar.bz2'

     0K ........ ........ ........ ........ ........ ........ 21%  461K 25s
  3072K ........ ........ ........ ........ ........ ........ 42%  669K 15s
  6144K ........ ........ ........ ........ ........ ........ 63%  653K 9s
  9216K ........ ........ ........ ........ ........ ........ 84%  713K 4s
 12288K ........ ........ ........ ........ ...              100%  625K=24s

2012-01-25 18:54:53 (609 KB/s) -
`061a9f17323117c9358ed60f33ecff78-postgresql-9.1.1.tar.bz2' saved
[14884071/14884071]

067201ea8b126597670b5eff72e1f66c-mythes-1.2.0.tar.gz
--2012-01-25 18:54:53--
http://dev-www.libreoffice.org/src/067201ea8b126597670b5eff72e1f66c-mythes-1.2.0.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4893724 (4.7M) [application/x-gzip]
Saving to: `067201ea8b126597670b5eff72e1f66c-mythes-1.2.0.tar.gz'

     0K ........ ........ ........ ........ ........ ........ 64%  474K 4s
  3072K ........ ........ ........ ..                        100%  660K=9.1s

2012-01-25 18:55:03 (527 KB/s) -
`067201ea8b126597670b5eff72e1f66c-mythes-1.2.0.tar.gz' saved
[4893724/4893724]

3404ab6b1792ae5f16bbd603bd1e1d03-libformula-1.1.7.zip
--2012-01-25 18:55:03--
http://dev-www.libreoffice.org/src/3404ab6b1792ae5f16bbd603bd1e1d03-libformula-1.1.7.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1180582 (1.1M) [application/zip]
Saving to: `3404ab6b1792ae5f16bbd603bd1e1d03-libformula-1.1.7.zip'

     0K ........ ........ ..                                 100%  341K=3.4s

2012-01-25 18:55:06 (341 KB/s) -
`3404ab6b1792ae5f16bbd603bd1e1d03-libformula-1.1.7.zip' saved
[1180582/1180582]

3bdf40c0d199af31923e900d082ca2dd-libfonts-1.1.6.zip
--2012-01-25 18:55:06--
http://dev-www.libreoffice.org/src/3bdf40c0d199af31923e900d082ca2dd-libfonts-1.1.6.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 5750610 (5.5M) [application/zip]
Saving to: `3bdf40c0d199af31923e900d082ca2dd-libfonts-1.1.6.zip'

     0K ........ ........ ........ ........ ........ ........ 54%  463K 5s
  3072K ........ ........ ........ ........ .......          100%  679K=10s

2012-01-25 18:55:17 (541 KB/s) -
`3bdf40c0d199af31923e900d082ca2dd-libfonts-1.1.6.zip' saved
[5750610/5750610]

8ce2fcd72becf06c41f7201d15373ed9-librepository-1.1.6.zip
--2012-01-25 18:55:17--
http://dev-www.libreoffice.org/src/8ce2fcd72becf06c41f7201d15373ed9-librepository-1.1.6.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 762419 (745K) [application/zip]
Saving to: `8ce2fcd72becf06c41f7201d15373ed9-librepository-1.1.6.zip'

     0K ........ ...                                         100%  297K=2.5s

2012-01-25 18:55:20 (297 KB/s) -
`8ce2fcd72becf06c41f7201d15373ed9-librepository-1.1.6.zip' saved
[762419/762419]

97b2d4dba862397f446b217e2b623e71-libloader-1.1.6.zip
--2012-01-25 18:55:20--
http://dev-www.libreoffice.org/src/97b2d4dba862397f446b217e2b623e71-libloader-1.1.6.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2938721 (2.8M) [application/zip]
Saving to: `97b2d4dba862397f446b217e2b623e71-libloader-1.1.6.zip'

     0K ........ ........ ........ ........ ........ ....    100%  451K=6.4s

2012-01-25 18:55:27 (451 KB/s) -
`97b2d4dba862397f446b217e2b623e71-libloader-1.1.6.zip' saved
[2938721/2938721]

ace6ab49184e329db254e454a010f56d-libxml-1.1.7.zip
--2012-01-25 18:55:27--
http://dev-www.libreoffice.org/src/ace6ab49184e329db254e454a010f56d-libxml-1.1.7.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2929311 (2.8M) [application/zip]
Saving to: `ace6ab49184e329db254e454a010f56d-libxml-1.1.7.zip'

     0K ........ ........ ........ ........ ........ ....    100%  467K=6.1s

2012-01-25 18:55:34 (467 KB/s) -
`ace6ab49184e329db254e454a010f56d-libxml-1.1.7.zip' saved
[2929311/2929311]

d8bd5eed178db6e2b18eeed243f85aa8-flute-1.1.6.zip
--2012-01-25 18:55:34--
http://dev-www.libreoffice.org/src/d8bd5eed178db6e2b18eeed243f85aa8-flute-1.1.6.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 207563 (203K) [application/zip]
Saving to: `d8bd5eed178db6e2b18eeed243f85aa8-flute-1.1.6.zip'

     0K ...                                                  100%  149K=1.4s

2012-01-25 18:55:35 (149 KB/s) -
`d8bd5eed178db6e2b18eeed243f85aa8-flute-1.1.6.zip' saved
[207563/207563]

db60e4fde8dd6d6807523deb71ee34dc-liblayout-0.2.10.zip
--2012-01-25 18:55:36--
http://dev-www.libreoffice.org/src/db60e4fde8dd6d6807523deb71ee34dc-liblayout-0.2.10.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1396007 (1.3M) [application/zip]
Saving to: `db60e4fde8dd6d6807523deb71ee34dc-liblayout-0.2.10.zip'

     0K ........ ........ .....                              100%  378K=3.6s

2012-01-25 18:55:40 (378 KB/s) -
`db60e4fde8dd6d6807523deb71ee34dc-liblayout-0.2.10.zip' saved
[1396007/1396007]

eeb2c7ddf0d302fba4bfc6e97eac9624-libbase-1.1.6.zip
--2012-01-25 18:55:40--
http://dev-www.libreoffice.org/src/eeb2c7ddf0d302fba4bfc6e97eac9624-libbase-1.1.6.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 427800 (418K) [application/zip]
Saving to: `eeb2c7ddf0d302fba4bfc6e97eac9624-libbase-1.1.6.zip'

     0K ......                                               100%  228K=1.8s

2012-01-25 18:55:42 (228 KB/s) -
`eeb2c7ddf0d302fba4bfc6e97eac9624-libbase-1.1.6.zip' saved
[427800/427800]

f94d9870737518e3b597f9265f4e9803-libserializer-1.1.6.zip
--2012-01-25 18:55:42--
http://dev-www.libreoffice.org/src/f94d9870737518e3b597f9265f4e9803-libserializer-1.1.6.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 211919 (207K) [application/zip]
Saving to: `f94d9870737518e3b597f9265f4e9803-libserializer-1.1.6.zip'

     0K ...                                                  100%  156K=1.3s

2012-01-25 18:55:44 (156 KB/s) -
`f94d9870737518e3b597f9265f4e9803-libserializer-1.1.6.zip' saved
[211919/211919]

ba2930200c9f019c2d93a8c88c651a0f-flow-engine-0.9.4.zip
--2012-01-25 18:55:44--
http://dev-www.libreoffice.org/src/ba2930200c9f019c2d93a8c88c651a0f-flow-engine-0.9.4.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 743031 (726K) [application/zip]
Saving to: `ba2930200c9f019c2d93a8c88c651a0f-flow-engine-0.9.4.zip'

     0K ........ ...                                         100%  321K=2.3s

2012-01-25 18:55:46 (321 KB/s) -
`ba2930200c9f019c2d93a8c88c651a0f-flow-engine-0.9.4.zip' saved
[743031/743031]

ff369e69ef0f0143beb5626164e87ae2-neon-0.29.5.tar.gz
--2012-01-25 18:55:46--
http://dev-www.libreoffice.org/src/ff369e69ef0f0143beb5626164e87ae2-neon-0.29.5.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 884484 (864K) [application/x-gzip]
Saving to: `ff369e69ef0f0143beb5626164e87ae2-neon-0.29.5.tar.gz'

     0K ........ .....                                       100%  321K=2.7s

2012-01-25 18:55:49 (321 KB/s) -
`ff369e69ef0f0143beb5626164e87ae2-neon-0.29.5.tar.gz' saved
[884484/884484]

3dd55b952826d2b32f51308f2f91aa89-gettext-0.18.1.1.tar.gz
--2012-01-25 18:55:49--
http://dev-www.libreoffice.org/src/3dd55b952826d2b32f51308f2f91aa89-gettext-0.18.1.1.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 15139737 (14M) [application/x-gzip]
Saving to: `3dd55b952826d2b32f51308f2f91aa89-gettext-0.18.1.1.tar.gz'

     0K ........ ........ ........ ........ ........ ........ 20%  481K 24s
  3072K ........ ........ ........ ........ ........ ........ 41%  683K 15s
  6144K ........ ........ ........ ........ ........ ........ 62%  674K 9s
  9216K ........ ........ ........ ........ ........ ........ 83%  681K 4s
 12288K ........ ........ ........ ........ .......          100%  668K=24s

2012-01-25 18:56:14 (624 KB/s) -
`3dd55b952826d2b32f51308f2f91aa89-gettext-0.18.1.1.tar.gz' saved
[15139737/15139737]

9f6e85e1e38490c3956f4415bcd33e6e-glib-2.28.1.tar.gz
--2012-01-25 18:56:14--
http://dev-www.libreoffice.org/src/9f6e85e1e38490c3956f4415bcd33e6e-glib-2.28.1.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 9746957 (9.3M) [application/x-gzip]
Saving to: `9f6e85e1e38490c3956f4415bcd33e6e-glib-2.28.1.tar.gz'

     0K ........ ........ ........ ........ ........ ........ 32%  480K 13s
  3072K ........ ........ ........ ........ ........ ........ 64%  550K 7s
  6144K ........ ........ ........ ........ ........ ........ 96%  535K 1s
  9216K ....                                                 100%  826K=18s

2012-01-25 18:56:32 (526 KB/s) -
`9f6e85e1e38490c3956f4415bcd33e6e-glib-2.28.1.tar.gz' saved
[9746957/9746957]

a7d6c5f2fe2d481149ed3ba807b5c043-gdk-pixbuf-2.23.0.tar.gz
--2012-01-25 18:56:32--
http://dev-www.libreoffice.org/src/a7d6c5f2fe2d481149ed3ba807b5c043-gdk-pixbuf-2.23.0.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2241319 (2.1M) [application/x-gzip]
Saving to: `a7d6c5f2fe2d481149ed3ba807b5c043-gdk-pixbuf-2.23.0.tar.gz'

     0K ........ ........ ........ ........ ..               100%  356K=6.2s

2012-01-25 18:56:39 (356 KB/s) -
`a7d6c5f2fe2d481149ed3ba807b5c043-gdk-pixbuf-2.23.0.tar.gz' saved
[2241319/2241319]

3a84ac2da37cae5bf7ce616228c6fbde-libgsf-1.14.19.tar.gz
--2012-01-25 18:56:39--
http://dev-www.libreoffice.org/src/3a84ac2da37cae5bf7ce616228c6fbde-libgsf-1.14.19.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 788587 (770K) [application/x-gzip]
Saving to: `3a84ac2da37cae5bf7ce616228c6fbde-libgsf-1.14.19.tar.gz'

     0K ........ ....                                        100%  263K=2.9s

2012-01-25 18:56:42 (263 KB/s) -
`3a84ac2da37cae5bf7ce616228c6fbde-libgsf-1.14.19.tar.gz' saved
[788587/788587]

22ad1c8d3fda7e73b0798035f3dd96bc-pango-1.28.3.tar.gz
--2012-01-25 18:56:42--
http://dev-www.libreoffice.org/src/22ad1c8d3fda7e73b0798035f3dd96bc-pango-1.28.3.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2121138 (2.0M) [application/x-gzip]
Saving to: `22ad1c8d3fda7e73b0798035f3dd96bc-pango-1.28.3.tar.gz'

     0K ........ ........ ........ ........                  100%  357K=5.8s

2012-01-25 18:56:49 (357 KB/s) -
`22ad1c8d3fda7e73b0798035f3dd96bc-pango-1.28.3.tar.gz' saved
[2121138/2121138]

0611e099e807210cf738dcb41425d104-libcroco-0.6.2.tar.gz
--2012-01-25 18:56:49--
http://dev-www.libreoffice.org/src/0611e099e807210cf738dcb41425d104-libcroco-0.6.2.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 575474 (562K) [application/x-gzip]
Saving to: `0611e099e807210cf738dcb41425d104-libcroco-0.6.2.tar.gz'

     0K ........                                             100%  236K=2.4s

2012-01-25 18:56:51 (236 KB/s) -
`0611e099e807210cf738dcb41425d104-libcroco-0.6.2.tar.gz' saved
[575474/575474]

d7a242ca43e33e1b63d3073f9d46a6a8-librsvg-2.32.1.tar.gz
--2012-01-25 18:56:51--
http://dev-www.libreoffice.org/src/d7a242ca43e33e1b63d3073f9d46a6a8-librsvg-2.32.1.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 636510 (622K) [application/x-gzip]
Saving to: `d7a242ca43e33e1b63d3073f9d46a6a8-librsvg-2.32.1.tar.gz'

     0K ........ .                                           100%  248K=2.5s

2012-01-25 18:56:54 (248 KB/s) -
`d7a242ca43e33e1b63d3073f9d46a6a8-librsvg-2.32.1.tar.gz' saved
[636510/636510]

220035f111ea045a51e290906025e8b5-libpng-1.5.1.tar.gz
--2012-01-25 18:56:54--
http://dev-www.libreoffice.org/src/220035f111ea045a51e290906025e8b5-libpng-1.5.1.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 961235 (939K) [application/x-gzip]
Saving to: `220035f111ea045a51e290906025e8b5-libpng-1.5.1.tar.gz'

     0K ........ ......                                      100%  278K=3.4s

2012-01-25 18:56:58 (278 KB/s) -
`220035f111ea045a51e290906025e8b5-libpng-1.5.1.tar.gz' saved
[961235/961235]

a2c10c04f396a9ce72894beb18b4e1f9-jpeg-8c.tar.gz
--2012-01-25 18:56:58--
http://dev-www.libreoffice.org/src/a2c10c04f396a9ce72894beb18b4e1f9-jpeg-8c.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 986681 (964K) [application/x-gzip]
Saving to: `a2c10c04f396a9ce72894beb18b4e1f9-jpeg-8c.tar.gz'

     0K ........ .......                                     100%  286K=3.4s

2012-01-25 18:57:02 (286 KB/s) -
`a2c10c04f396a9ce72894beb18b4e1f9-jpeg-8c.tar.gz' saved
[986681/986681]

c735eab2d659a96e5a594c9e8541ad63-zlib-1.2.5.tar.gz
--2012-01-25 18:57:02--
http://dev-www.libreoffice.org/src/c735eab2d659a96e5a594c9e8541ad63-zlib-1.2.5.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 544640 (532K) [application/x-gzip]
Saving to: `c735eab2d659a96e5a594c9e8541ad63-zlib-1.2.5.tar.gz'

     0K ........                                             100%  235K=2.3s

2012-01-25 18:57:05 (235 KB/s) -
`c735eab2d659a96e5a594c9e8541ad63-zlib-1.2.5.tar.gz' saved
[544640/544640]

314e582264c36b3735466c522899aa07-icu4c-4_4_2-src.tgz
--2012-01-25 18:57:05--
http://dev-www.libreoffice.org/src/314e582264c36b3735466c522899aa07-icu4c-4_4_2-src.tgz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 16446776 (16M) [application/x-gzip]
Saving to: `314e582264c36b3735466c522899aa07-icu4c-4_4_2-src.tgz'

     0K ........ ........ ........ ........ ........ ........ 19%  411K 32s
  3072K ........ ........ ........ ........ ........ ........ 38%  686K 19s
  6144K ........ ........ ........ ........ ........ ........ 57%  713K 12s
  9216K ........ ........ ........ ........ ........ ........ 76%  668K 6s
 12288K ........ ........ ........ ........ ........ ........ 95%  678K 1s
 15360K ........ ..                                          100%  677K=26s

2012-01-25 18:57:32 (608 KB/s) -
`314e582264c36b3735466c522899aa07-icu4c-4_4_2-src.tgz' saved
[16446776/16446776]

451ccf439a36a568653b024534669971-ConvertTextToNumber-1.3.2.oxt
--2012-01-25 18:57:32--
http://dev-www.libreoffice.org/src/451ccf439a36a568653b024534669971-ConvertTextToNumber-1.3.2.oxt
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 42487 (41K) [text/plain]
Saving to: `451ccf439a36a568653b024534669971-ConvertTextToNumber-1.3.2.oxt'

     0K                                                      100% 60.5K=0.7s

2012-01-25 18:57:33 (60.5 KB/s) -
`451ccf439a36a568653b024534669971-ConvertTextToNumber-1.3.2.oxt' saved
[42487/42487]

b99fb620b1324b4ce79ee6998b507146-JLanguageTool-1.4.0.tar.bz2
--2012-01-25 18:57:33--
http://dev-www.libreoffice.org/src/b99fb620b1324b4ce79ee6998b507146-JLanguageTool-1.4.0.tar.bz2
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 23343100 (22M) [application/x-bzip]
Saving to: `b99fb620b1324b4ce79ee6998b507146-JLanguageTool-1.4.0.tar.bz2'

     0K ........ ........ ........ ........ ........ ........ 13%  452K 44s
  3072K ........ ........ ........ ........ ........ ........ 26%  685K 31s
  6144K ........ ........ ........ ........ ........ ........ 40%  671K 23s
  9216K ........ ........ ........ ........ ........ ........ 53%  687K 17s
 12288K ........ ........ ........ ........ ........ ........ 67%  660K 12s
 15360K ........ ........ ........ ........ ........ ........ 80%  722K 7s
 18432K ........ ........ ........ ........ ........ ........ 94%  662K 2s
 21504K ........ ........ ....                               100%  682K=36s

2012-01-25 18:58:09 (637 KB/s) -
`b99fb620b1324b4ce79ee6998b507146-JLanguageTool-1.4.0.tar.bz2' saved
[23343100/23343100]

debc62758716a169df9f62e6ab2bc634-zlib-1.2.3.tar.gz
--2012-01-25 18:58:10--
http://dev-www.libreoffice.org/src/debc62758716a169df9f62e6ab2bc634-zlib-1.2.3.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 496597 (485K) [application/x-gzip]
Saving to: `debc62758716a169df9f62e6ab2bc634-zlib-1.2.3.tar.gz'

     0K .......                                              100%  244K=2.0s

2012-01-25 18:58:12 (244 KB/s) -
`debc62758716a169df9f62e6ab2bc634-zlib-1.2.3.tar.gz' saved
[496597/496597]

0f63ee487fda8f21fafa767b3c447ac9-ixion-0.2.0.tar.gz
--2012-01-25 18:58:12--
http://dev-www.libreoffice.org/src/0f63ee487fda8f21fafa767b3c447ac9-ixion-0.2.0.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 376068 (367K) [application/x-gzip]
Saving to: `0f63ee487fda8f21fafa767b3c447ac9-ixion-0.2.0.tar.gz'

     0K .....                                                100%  207K=1.8s

2012-01-25 18:58:14 (207 KB/s) -
`0f63ee487fda8f21fafa767b3c447ac9-ixion-0.2.0.tar.gz' saved
[376068/376068]

71474203939fafbe271e1263e61d083e-nss-3.12.8-with-nspr-4.8.6.tar.gz
--2012-01-25 18:58:14--
http://dev-www.libreoffice.org/src/71474203939fafbe271e1263e61d083e-nss-3.12.8-with-nspr-4.8.6.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 7194574 (6.9M) [application/x-gzip]
Saving to: `71474203939fafbe271e1263e61d083e-nss-3.12.8-with-nspr-4.8.6.tar.gz'

     0K ........ ........ ........ ........ ........ ........ 43%  452K 9s
  3072K ........ ........ ........ ........ ........ ........ 87%  686K 2s
  6144K ........ .....                                       100%  643K=13s

2012-01-25 18:58:27 (556 KB/s) -
`71474203939fafbe271e1263e61d083e-nss-3.12.8-with-nspr-4.8.6.tar.gz'
saved [7194574/7194574]

9d283e02441d8cebdcd1e5d9df227d67-libwpg-0.2.1.tar.bz2
--2012-01-25 18:58:28--
http://dev-www.libreoffice.org/src/9d283e02441d8cebdcd1e5d9df227d67-libwpg-0.2.1.tar.bz2
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 335521 (328K) [application/x-bzip]
Saving to: `9d283e02441d8cebdcd1e5d9df227d67-libwpg-0.2.1.tar.bz2'

     0K .....                                                100%  197K=1.7s

2012-01-25 18:58:30 (197 KB/s) -
`9d283e02441d8cebdcd1e5d9df227d67-libwpg-0.2.1.tar.bz2' saved
[335521/335521]

c01351d7db2b205de755d58769288224-libwpd-0.9.4.tar.bz2
--2012-01-25 18:58:30--
http://dev-www.libreoffice.org/src/c01351d7db2b205de755d58769288224-libwpd-0.9.4.tar.bz2
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 629054 (614K) [application/x-bzip]
Saving to: `c01351d7db2b205de755d58769288224-libwpd-0.9.4.tar.bz2'

     0K ........ .                                           100%  261K=2.4s

2012-01-25 18:58:32 (261 KB/s) -
`c01351d7db2b205de755d58769288224-libwpd-0.9.4.tar.bz2' saved
[629054/629054]

34dd7951abbda99b7a75a09993a37965-libwps-0.2.4.tar.bz2
--2012-01-25 18:58:32--
http://dev-www.libreoffice.org/src/34dd7951abbda99b7a75a09993a37965-libwps-0.2.4.tar.bz2
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 314984 (308K) [application/x-bzip]
Saving to: `34dd7951abbda99b7a75a09993a37965-libwps-0.2.4.tar.bz2'

     0K ....                                                 100%  187K=1.6s

2012-01-25 18:58:34 (187 KB/s) -
`34dd7951abbda99b7a75a09993a37965-libwps-0.2.4.tar.bz2' saved
[314984/314984]

0ff7d225d087793c8c2c680d77aac3e7-mdds_0.5.3.tar.bz2
--2012-01-25 18:58:35--
http://dev-www.libreoffice.org/src/0ff7d225d087793c8c2c680d77aac3e7-mdds_0.5.3.tar.bz2
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 92050 (90K) [application/x-bzip]
Saving to: `0ff7d225d087793c8c2c680d77aac3e7-mdds_0.5.3.tar.bz2'

     0K .                                                    100% 92.2K=1.0s

2012-01-25 18:58:36 (92.2 KB/s) -
`0ff7d225d087793c8c2c680d77aac3e7-mdds_0.5.3.tar.bz2' saved
[92050/92050]

f02578f5218f217a9f20e9c30e119c6a-boost_1_44_0.tar.bz2
--2012-01-25 18:58:36--
http://dev-www.libreoffice.org/src/f02578f5218f217a9f20e9c30e119c6a-boost_1_44_0.tar.bz2
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 38806420 (37M) [application/x-bzip]
Saving to: `f02578f5218f217a9f20e9c30e119c6a-boost_1_44_0.tar.bz2'

     0K ........ ........ ........ ........ ........ ........  8%  444K 78s
  3072K ........ ........ ........ ........ ........ ........ 16%  637K 61s
  6144K ........ ........ ........ ........ ........ ........ 24%  697K 50s
  9216K ........ ........ ........ ........ ........ ........ 32%  672K 43s
 12288K ........ ........ ........ ........ ........ ........ 40%  649K 37s
 15360K ........ ........ ........ ........ ........ ........ 48%  654K 32s
 18432K ........ ........ ........ ........ ........ ........ 56%  637K 27s
 21504K ........ ........ ........ ........ ........ ........ 64%  669K 21s
 24576K ........ ........ ........ ........ ........ ........ 72%  657K 16s
 27648K ........ ........ ........ ........ ........ ........ 81%  698K 11s
 30720K ........ ........ ........ ........ ........ ........ 89%  664K 6s
 33792K ........ ........ ........ ........ ........ ........ 97%  677K 2s
 36864K ........ ........                                    100%  652K=59s

2012-01-25 18:59:36 (638 KB/s) -
`f02578f5218f217a9f20e9c30e119c6a-boost_1_44_0.tar.bz2' saved
[38806420/38806420]

3121aaf3e13e5d88dfff13fb4a5f1ab8-hunspell-1.3.2.tar.gz
--2012-01-25 18:59:36--
http://dev-www.libreoffice.org/src/3121aaf3e13e5d88dfff13fb4a5f1ab8-hunspell-1.3.2.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 975917 (953K) [application/x-gzip]
Saving to: `3121aaf3e13e5d88dfff13fb4a5f1ab8-hunspell-1.3.2.tar.gz'

     0K ........ ......                                      100%  340K=2.8s

2012-01-25 18:59:39 (340 KB/s) -
`3121aaf3e13e5d88dfff13fb4a5f1ab8-hunspell-1.3.2.tar.gz' saved
[975917/975917]

3bf481ca95109b14435125c0dd1f2217-graphite2-1.0.3.tgz
--2012-01-25 18:59:39--
http://dev-www.libreoffice.org/src/3bf481ca95109b14435125c0dd1f2217-graphite2-1.0.3.tgz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4352127 (4.2M) [application/x-gzip]
Saving to: `3bf481ca95109b14435125c0dd1f2217-graphite2-1.0.3.tgz'

     0K ........ ........ ........ ........ ........ ........ 72%  467K 3s
  3072K ........ ........ ..                                 100%  672K=8.3s

2012-01-25 18:59:48 (510 KB/s) -
`3bf481ca95109b14435125c0dd1f2217-graphite2-1.0.3.tgz' saved
[4352127/4352127]

adb5c5c8398fd89ebee2d9b4e90e061e-libvisio-0.0.13.tar.bz2
--2012-01-25 18:59:48--
http://dev-www.libreoffice.org/src/adb5c5c8398fd89ebee2d9b4e90e061e-libvisio-0.0.13.tar.bz2
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 380321 (371K) [application/x-bzip]
Saving to: `adb5c5c8398fd89ebee2d9b4e90e061e-libvisio-0.0.13.tar.bz2'

     0K .....                                                100%  215K=1.7s

2012-01-25 18:59:50 (215 KB/s) -
`adb5c5c8398fd89ebee2d9b4e90e061e-libvisio-0.0.13.tar.bz2' saved
[380321/380321]

e7a384790b13c29113e22e596ade9687-LinLibertineG-20120116.zip
--2012-01-25 18:59:50--
http://dev-www.libreoffice.org/src/e7a384790b13c29113e22e596ade9687-LinLibertineG-20120116.zip
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 6651982 (6.3M) [application/zip]
Saving to: `e7a384790b13c29113e22e596ade9687-LinLibertineG-20120116.zip'

     0K ........ ........ ........ ........ ........ ........ 47%  463K 7s
  3072K ........ ........ ........ ........ ........ ........ 94%  699K 1s
  6144K .....                                                100%  673K=12s

2012-01-25 19:00:02 (562 KB/s) -
`e7a384790b13c29113e22e596ade9687-LinLibertineG-20120116.zip' saved
[6651982/6651982]

7c2549f6b0a8bb604e6c4c729ffdcfe6-libcmis-0.1.0.tar.gz
--2012-01-25 19:00:02--
http://dev-www.libreoffice.org/src/7c2549f6b0a8bb604e6c4c729ffdcfe6-libcmis-0.1.0.tar.gz
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 373519 (365K) [application/x-gzip]
Saving to: `7c2549f6b0a8bb604e6c4c729ffdcfe6-libcmis-0.1.0.tar.gz'

     0K .....                                                100%  220K=1.7s

2012-01-25 19:00:04 (220 KB/s) -
`7c2549f6b0a8bb604e6c4c729ffdcfe6-libcmis-0.1.0.tar.gz' saved
[373519/373519]

185d60944ea767075d27247c3162b3bc-unowinreg.dll
--2012-01-25 19:00:05--
http://dev-www.libreoffice.org/extern/185d60944ea767075d27247c3162b3bc-unowinreg.dll
Resolving dev-www.libreoffice.org (dev-www.libreoffice.org)... 195.135.221.70
Connecting to dev-www.libreoffice.org
(dev-www.libreoffice.org)|195.135.221.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 12288 (12K) [text/plain]
Saving to: `185d60944ea767075d27247c3162b3bc-unowinreg.dll'

     0K                                                      100% 35.4K=0.3s

2012-01-25 19:00:05 (35.4 KB/s) -
`185d60944ea767075d27247c3162b3bc-unowinreg.dll' saved [12288/12288]

********************************************************************
*
*   Running the post download checks.
*
********************************************************************
checking build system type... i386-pc-solaris2.11
checking host system type... i386-pc-solaris2.11
cd /usr/local/src/libreoffice-core-3.5.0.1/instsetoo_native && unset
MAKEFLAGS && export gb_SourceEnvAndRecurse_STAGE=gbuild &&
/usr/local/src/libreoffice-core-3.5.0.1/solenv/bin/build.pl  -P1 --all
-- -P1 gb_MAKETARGET=all


=============
(1/144) Building module solenv
=============
Entering /usr/local/src/libreoffice-core-3.5.0.1/solenv

touch /usr/local/src/libreoffice-core-3.5.0.1/solver/unxsogi.pro/inc/minormkchanged.flg
Entering /usr/local/src/libreoffice-core-3.5.0.1/solenv/gdb

install-gdb-printers -a ../unxsogi.pro/misc -f && touch
../unxsogi.pro/misc/autoloaders.flag
solenv deliver
Module 'solenv' delivered successfully. 6 files copied, 0 files unchanged

=============
(2/144) Building module lpsolve
=============

=============
(3/144) Building module sane
=============

=============
(4/144) Building module soltools
=============

=============
(5/144) Building module stlport
=============

=============
(6/144) Building module afms
=============

=============
(7/144) Building module nss
=============

=============
(8/144) Building module more_fonts
=============

=============
(9/144) Building module vigra
=============

=============
(10/144) Building module hsqldb
=============

=============
(11/144) Building module xml2cmp
=============

=============
(12/144) Building module tomcat
=============

=============
(13/144) Building module unixODBC
=============

=============
(14/144) Building module beanshell
=============

=============
(15/144) Building module stax
=============
Entering /usr/local/src/libreoffice-core-3.5.0.1/lpsolve

if [ -f ./unxsogi.pro/misc/build/lp_solve_5.5.exists ] ; then mv
./unxsogi.pro/misc/build/lp_solve_5.5
./unxsogi.pro/misc/build/lp_solve_5.5_removeme ; fi
make writeable...
patching file lp_solve_5.5/lpsolve55/ccc
patching file lp_solve_5.5/lpsolve55/ccc.osx
patching file lp_solve_5.5/lpsolve55/ccc.solaris
patching file lp_solve_5.5/lpsolve55/ccc.ios
patching file lp_solve_5.5/lpsolve55/ccc.aix.gcc
patching file lp_solve_5.5/lp_lib.h
In file included from ../lp_MDO.c:23:
../lp_lib.h:199:18: math.h: No such file or directory
../shared/commonlib.c:18:18: math.h: No such file or directory
../shared/myblas.c:6:18: math.h: No such file or directory
In file included from ../ini.c:5:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lpkit.h:1,
                 from ../lp_rlp.c:32:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_crash.c:22:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../bfp/bfp_LUSOL/lp_LUSOL.c:24:
../lp_lib.h:199:18: math.h: No such file or directory
../bfp/bfp_LUSOL/LUSOL/lusol.c:49:18: math.h: No such file or directory
In file included from ../lp_Hash.c:4:
../lp_lib.h:199:18: math.h: No such file or directory
../lp_lib.c:27:18: math.h: No such file or directory
In file included from ../lp_wlp.c:6:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_matrix.c:4:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_mipbb.c:31:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_MPS.c:6:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_params.c:7:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_presolve.c:37:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_price.c:4:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_pricePSE.c:4:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_report.c:23:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_scale.c:4:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_simplex.c:28:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_SOS.c:4:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_utils.c:5:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lpkit.h:1,
                 from ../yacc_read.c:36:
../lp_lib.h:199:18: math.h: No such file or directory
ar: cannot open lp_MDO.o: No such file or directory
ar: cannot open commonlib.o: No such file or directory
ar: cannot open myblas.o: No such file or directory
ar: cannot open ini.o: No such file or directory
ar: cannot open lp_rlp.o: No such file or directory
ar: cannot open lp_crash.o: No such file or directory
ar: cannot open lp_LUSOL.o: No such file or directory
ar: cannot open lusol.o: No such file or directory
ar: cannot open lp_Hash.o: No such file or directory
ar: cannot open lp_lib.o: No such file or directory
ar: cannot open lp_wlp.o: No such file or directory
ar: cannot open lp_matrix.o: No such file or directory
ar: cannot open lp_mipbb.o: No such file or directory
ar: cannot open lp_MPS.o: No such file or directory
ar: cannot open lp_params.o: No such file or directory
ar: cannot open lp_presolve.o: No such file or directory
ar: cannot open lp_price.o: No such file or directory
ar: cannot open lp_pricePSE.o: No such file or directory
ar: cannot open lp_report.o: No such file or directory
ar: cannot open lp_scale.o: No such file or directory
ar: cannot open lp_simplex.o: No such file or directory
ar: cannot open lp_SOS.o: No such file or directory
ar: cannot open lp_utils.o: No such file or directory
ar: cannot open yacc_read.o: No such file or directory
ar: creating liblpsolve55.a
ar: writing liblpsolve55.a
ar: lp_MDO.o not found
ar: commonlib.o not found
ar: myblas.o not found
ar: ini.o not found
ar: lp_rlp.o not found
ar: lp_crash.o not found
ar: lp_LUSOL.o not found
ar: lusol.o not found
ar: lp_Hash.o not found
ar: lp_lib.o not found
ar: lp_wlp.o not found
ar: lp_matrix.o not found
ar: lp_mipbb.o not found
ar: lp_MPS.o not found
ar: lp_params.o not found
ar: lp_presolve.o not found
ar: lp_price.o not found
ar: lp_pricePSE.o not found
ar: lp_report.o not found
ar: lp_scale.o not found
ar: lp_simplex.o not found
ar: lp_SOS.o not found
ar: lp_utils.o not found
ar: yacc_read.o not found
a - lp_MDO.o
a - commonlib.o
a - mmio.o
a - myblas.o
a - ini.o
a - fortify.o
a - colamd.o
a - lp_rlp.o
a - lp_crash.o
a - lp_LUSOL.o
a - lusol.o
a - lp_Hash.o
a - lp_lib.o
a - lp_wlp.o
a - lp_matrix.o
a - lp_mipbb.o
a - lp_MPS.o
a - lp_params.o
a - lp_presolve.o
a - lp_price.o
a - lp_pricePSE.o
a - lp_report.o
a - lp_scale.o
a - lp_simplex.o
a - lp_SOS.o
a - lp_utils.o
a - yacc_read.o
In file included from ../lp_MDO.c:23:
../lp_lib.h:199:18: math.h: No such file or directory
../shared/commonlib.c:18:18: math.h: No such file or directory
../shared/myblas.c:6:18: math.h: No such file or directory
In file included from ../ini.c:5:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lpkit.h:1,
                 from ../lp_rlp.c:32:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_crash.c:22:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../bfp/bfp_LUSOL/lp_LUSOL.c:24:
../lp_lib.h:199:18: math.h: No such file or directory
../bfp/bfp_LUSOL/LUSOL/lusol.c:49:18: math.h: No such file or directory
In file included from ../lp_Hash.c:4:
../lp_lib.h:199:18: math.h: No such file or directory
../lp_lib.c:27:18: math.h: No such file or directory
In file included from ../lp_wlp.c:6:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_matrix.c:4:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_mipbb.c:31:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_MPS.c:6:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_params.c:7:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_presolve.c:37:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_price.c:4:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_pricePSE.c:4:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_report.c:23:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_scale.c:4:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_simplex.c:28:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_SOS.c:4:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lp_utils.c:5:
../lp_lib.h:199:18: math.h: No such file or directory
In file included from ../lpkit.h:1,
                 from ../yacc_read.c:36:
../lp_lib.h:199:18: math.h: No such file or directory
gcc: lp_MDO.o: No such file or directory
gcc: commonlib.o: No such file or directory
gcc: myblas.o: No such file or directory
gcc: ini.o: No such file or directory
gcc: lp_rlp.o: No such file or directory
gcc: lp_crash.o: No such file or directory
gcc: lp_LUSOL.o: No such file or directory
gcc: lusol.o: No such file or directory
gcc: lp_Hash.o: No such file or directory
gcc: lp_lib.o: No such file or directory
gcc: lp_wlp.o: No such file or directory
gcc: lp_matrix.o: No such file or directory
gcc: lp_mipbb.o: No such file or directory
gcc: lp_MPS.o: No such file or directory
gcc: lp_params.o: No such file or directory
gcc: lp_presolve.o: No such file or directory
gcc: lp_price.o: No such file or directory
gcc: lp_pricePSE.o: No such file or directory
gcc: lp_report.o: No such file or directory
gcc: lp_scale.o: No such file or directory
gcc: lp_simplex.o: No such file or directory
gcc: lp_SOS.o: No such file or directory
gcc: lp_utils.o: No such file or directory
gcc: yacc_read.o: No such file or directory
cp: cannot stat
`./unxsogi.pro/misc/build/lp_solve_5.5/lpsolve55/liblpsolve55.so': No
such file or directory
dmake:  Error code 1, while making
'./unxsogi.pro/misc/build/so_predeliver_lpsolve'
Entering /usr/local/src/libreoffice-core-3.5.0.1/sane/prj

/usr/bin/bash: /usr/sfw/bin/make: No such file or directory
dmake:  Error code 127, while making 'all'
Entering /usr/local/src/libreoffice-core-3.5.0.1/soltools/mkdepend

Compiling: soltools/mkdepend/cppsetup.c
Compiling: soltools/mkdepend/ifparser.c
Compiling: soltools/mkdepend/include.c
Compiling: soltools/mkdepend/main.c
Compiling: soltools/mkdepend/parse.c
Compiling: soltools/mkdepend/pr.c
Compiling: soltools/mkdepend/collectdircontent.cxx
Making:    makedepend
ld: fatal: library -lCstd: not found
ld: fatal: file processing errors. No output written to
../unxsogi.pro/bin/makedepend
collect2: ld returned 1 exit status
dmake:  Error code 1, while making '../unxsogi.pro/bin/makedepend'
Entering /usr/local/src/libreoffice-core-3.5.0.1/stlport

if [ -f ./unxsogi.pro/misc/build/STLport-4.5.exists ] ; then mv
./unxsogi.pro/misc/build/STLport-4.5
./unxsogi.pro/misc/build/STLport-4.5_removeme ; fi
make writeable...
patching file STLport-4.5/src/common_macros_os2.mak
patching file STLport-4.5/src/common_percent_rules.mak
patching file STLport-4.5/src/dll_main.cpp
patching file STLport-4.5/src/gcc-3.0-freebsd.mak
patching file STLport-4.5/src/gcc-3.0-mingw.mak
patching file STLport-4.5/src/gcc-3.0-os2.def
patching file STLport-4.5/src/gcc-3.0-os2.mak
patching file STLport-4.5/src/gcc-3.0.mak
patching file STLport-4.5/src/gcc-freebsd.mak
patching file STLport-4.5/stlport/config/stl_gcc.h
patching file STLport-4.5/stlport/cwchar
patching file STLport-4.5/stlport/stdexcept
patching file STLport-4.5/stlport/stl/_bvector.h
patching file STLport-4.5/stlport/stl/_complex.h
patching file STLport-4.5/stlport/stl/_config.h
patching file STLport-4.5/stlport/stl/_fstream.h
patching file STLport-4.5/stlport/stl/_ios_base.h
patching file STLport-4.5/stlport/stl/_rope.h
patching file STLport-4.5/stlport/stl/_stdio_file.h
patching file STLport-4.5/stlport/stl/_threads.h
patching file STLport-4.5/stlport/stl/_tree.c
patching file STLport-4.5/stlport/stl/_valarray.h
patching file STLport-4.5/stlport/stl/c_locale.h
patching file STLport-4.5/src/num_get_float.cpp
patching file STLport-4.5/src/strstream.cpp
patching file STLport-4.5/stlport/stl/_list.c
patching file STLport-4.5/stlport/stl/_time_facets.c
patching file STLport-4.5/stlport/stl/_tree.c
patching file STLport-4.5/stlport/stl/debug/_debug.c
patching file STLport-4.5/stlport/stl/debug/_list.h
patching file STLport-4.5/stlport/config/stl_gcc.h
/usr/bin/bash: /usr/sfw/bin/make: No such file or directory
dmake:  Error code 127, while making
'./unxsogi.pro/misc/build/so_built_so_stlport'
Entering /usr/local/src/libreoffice-core-3.5.0.1/afms

Making:    afms.dpz

if [ -f ./unxsogi.pro/misc/build/Adobe-Core35_AFMs-314.exists ] ; then
mv ./unxsogi.pro/misc/build/Adobe-Core35_AFMs-314
./unxsogi.pro/misc/build/Adobe-Core35_AFMs-314_removeme ; fi
make writeable...
Making:    fontunxafm.zip
rebuilding zipfiles
------------------------------
Making:    afms.dpz

no patch needed...
Entering /usr/local/src/libreoffice-core-3.5.0.1/nss

if [ -f ./unxsogi.pro/misc/build/nss-3.12.8.exists ] ; then mv
./unxsogi.pro/misc/build/nss-3.12.8
./unxsogi.pro/misc/build/nss-3.12.8_removeme ; fi
make writeable...
patching file nss-3.12.8/mozilla/nsprpub/config/rules.mk
patching file nss-3.12.8/mozilla/nsprpub/configure
Hunk #1 succeeded at 4070 with fuzz 2 (offset 170 lines).
patching file nss-3.12.8/mozilla/security/coreconf/Darwin.mk
patching file nss-3.12.8/mozilla/security/coreconf/Linux.mk
Hunk #2 succeeded at 154 with fuzz 1 (offset 4 lines).
Hunk #3 succeeded at 182 with fuzz 2 (offset 21 lines).
patching file nss-3.12.8/mozilla/security/coreconf/SunOS5.mk
patching file nss-3.12.8/mozilla/security/coreconf/arch.mk
patching file nss-3.12.8/mozilla/security/coreconf/rules.mk
patching file nss-3.12.8/mozilla/security/nss/cmd/platlibs.mk
patching file nss-3.12.8/mozilla/security/nss/cmd/shlibsign/Makefile
patching file nss-3.12.8/mozilla/nsprpub/configure
Hunk #1 succeeded at 3146 with fuzz 1 (offset 173 lines).
Hunk #2 succeeded at 3276 (offset 173 lines).
patching file nss-3.12.8/mozilla/nsprpub/configure.in
Hunk #1 succeeded at 968 (offset 137 lines).
Hunk #2 succeeded at 1009 (offset 137 lines).
patching file nss-3.12.8/mozilla/nsprpub/pr/src/Makefile.in
patching file nss-3.12.8/mozilla/security/coreconf/AIX.mk
patching file nss-3.12.8/mozilla/security/nss/cmd/platlibs.mk
Hunk #1 succeeded at 171 (offset -2 lines).
Hunk #2 succeeded at 221 (offset -2 lines).
patching file nss-3.12.8/mozilla/security/nss/cmd/shlibsign/mangle/Makefile
patching file nss-3.12.8/mozilla/security/nss/cmd/shlibsign/Makefile
patching file nss-3.12.8/mozilla/security/nss/nss-config.in
patching file nss-3.12.8/mozilla/security/coreconf/arch.mk
creating cache ./config.cache
checking host system type... i386-pc-solaris2.11
checking target system type... i386-pc-solaris2.11
checking build system type... i386-pc-solaris2.11
checking for whoami... /usr/gnu/bin/whoami
checking for gcc... gcc
checking whether the C compiler (gcc  ) works... yes
checking whether the C compiler (gcc  ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking how to run the C preprocessor... gcc -E
checking for ranlib... ranlib
checking for as... /usr/ccs/bin/as
checking for ar... /usr/ccs/bin/ar
checking for ld... /usr/ccs/bin/ld
checking for strip... /usr/ccs/bin/strip
checking for windres... no
checking for gcc -pipe support... no
checking whether C compiler supports -fprofile-generate... no
checking for visibility(hidden) attribute... no
checking for perl5... /usr/bin/perl
checking for dlopen in -ldl... yes
checking for dlfcn.h... yes
checking whether gcc needs -traditional... no
checking for lchown... yes
checking for strerror... yes
checking for pthread_create in -lpthreads... no
checking for pthread_create in -lpthread... yes
checking whether gcc accepts -pthread... no
checking whether gcc accepts -pthreads... yes
updating cache ./config.cache
creating ./config.status
creating Makefile
creating config/Makefile
creating config/autoconf.mk
creating config/nsprincl.mk
creating config/nsprincl.sh
creating config/nspr-config
creating lib/Makefile
creating lib/ds/Makefile
creating lib/libc/Makefile
creating lib/libc/include/Makefile
creating lib/libc/src/Makefile
creating lib/tests/Makefile
creating pkg/Makefile
creating pkg/linux/Makefile
creating pkg/solaris/Makefile
creating pkg/solaris/SUNWpr/Makefile
creating pkg/solaris/SUNWprd/Makefile
creating pr/Makefile
creating pr/include/Makefile
creating pr/include/md/Makefile
creating pr/include/obsolete/Makefile
creating pr/include/private/Makefile
creating pr/src/Makefile
creating pr/src/io/Makefile
creating pr/src/linking/Makefile
creating pr/src/malloc/Makefile
creating pr/src/md/Makefile
creating pr/src/md/unix/Makefile
creating pr/src/memory/Makefile
creating pr/src/misc/Makefile
creating pr/src/threads/Makefile
creating pr/tests/Makefile
creating pr/tests/dll/Makefile
creating pr/src/pthreads/Makefile
/usr/bin/bash: /usr/sfw/bin/make: No such file or directory
dmake:  Error code 127, while making './unxsogi.pro/misc/build/so_built_nss'
Entering /usr/local/src/libreoffice-core-3.5.0.1/more_fonts/fonts/ttf_dejavu

if [ -f ../../unxsogi.pro/misc/build/dejavu-fonts-ttf-2.33.exists ] ;
then mv ../../unxsogi.pro/misc/build/dejavu-fonts-ttf-2.33
../../unxsogi.pro/misc/build/dejavu-fonts-ttf-2.33_removeme ; fi
make writeable...
no patch needed...
Entering /usr/local/src/libreoffice-core-3.5.0.1/vigra

if [ -f ./unxsogi.pro/misc/build/vigra1.4.0.exists ] ; then mv
./unxsogi.pro/misc/build/vigra1.4.0
./unxsogi.pro/misc/build/vigra1.4.0_removeme ; fi
make writeable...
patching file vigra1.4.0/configure
patching file vigra1.4.0/include/vigra/array_vector.hxx
patching file vigra1.4.0/include/vigra/basicimage.hxx
patching file vigra1.4.0/include/vigra/basicimageview.hxx
patching file vigra1.4.0/include/vigra/boundarytensor.hxx
patching file vigra1.4.0/include/vigra/config.hxx
patching file vigra1.4.0/include/vigra/diff2d.hxx
patching file vigra1.4.0/include/vigra/fftw.hxx
patching file vigra1.4.0/include/vigra/fftw3.hxx
patching file vigra1.4.0/include/vigra/fixedpoint.hxx
patching file vigra1.4.0/include/vigra/gaborfilter.hxx
patching file vigra1.4.0/include/vigra/gaussians.hxx
patching file vigra1.4.0/include/vigra/imagecontainer.hxx
patching file vigra1.4.0/include/vigra/mathutil.hxx
patching file vigra1.4.0/include/vigra/numerictraits.hxx
patching file vigra1.4.0/include/vigra/orientedtensorfilters.hxx
patching file vigra1.4.0/include/vigra/polynomial.hxx
patching file vigra1.4.0/include/vigra/recursiveconvolution.hxx
patching file vigra1.4.0/include/vigra/rgbvalue.hxx
patching file vigra1.4.0/include/vigra/separableconvolution.hxx
patching file vigra1.4.0/include/vigra/sized_int.hxx
patching file vigra1.4.0/include/vigra/splines.hxx
patching file vigra1.4.0/include/vigra/static_assert.hxx
patching file vigra1.4.0/include/vigra/tinyvector.hxx
patching file vigra1.4.0/include/vigra/transformimage.hxx
patching file vigra1.4.0/include/vigra/diff2d.hxx
Entering /usr/local/src/libreoffice-core-3.5.0.1/hsqldb

if [ -f ./unxsogi.pro/misc/build/hsqldb.exists ] ; then mv
./unxsogi.pro/misc/build/hsqldb
./unxsogi.pro/misc/build/hsqldb_removeme ; fi
make writeable...
find: bad option -print0
find: [-H | -L] path-list predicate-list
xargs: illegal option -- 0
xargs: Usage: xargs: [-t] [-p] [-e[eofstr]] [-E eofstr] [-I replstr]
[-i[replstr]] [-L #] [-l[#]] [-n # [-x]] [-s size] [cmd [args ...]]
patching file hsqldb/src/org/hsqldb/Expression.java
patching file hsqldb/src/org/hsqldb/persist/HsqlDatabaseProperties.java
patching file hsqldb/src/org/hsqldb/Library.java
patching file hsqldb/src/org/hsqldb/Table.java
patching file hsqldb/src/org/hsqldb/TableWorks.java
Buildfile: build/build.xml

init:

javaversion6:

javaversion4:

javaversion2:

-prepare:
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/hsqldb/unxsogi.pro/misc/build/hsqldb/classes

codeswitcher:
    [javac] Compiling 1 source file to
/usr/local/src/libreoffice-core-3.5.0.1/hsqldb/unxsogi.pro/misc/build/hsqldb/classes
    [javac] Note:
/usr/local/src/libreoffice-core-3.5.0.1/hsqldb/unxsogi.pro/misc/build/hsqldb/src/org/hsqldb/util/CodeSwitcher.java
uses unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.

switches:

switchtojdk14:

switchtojdk16:
     [java] ........................

store:
    [javac] Compiling 6 source files to
/usr/local/src/libreoffice-core-3.5.0.1/hsqldb/unxsogi.pro/misc/build/hsqldb/classes

lib:
    [javac] Compiling 40 source files to
/usr/local/src/libreoffice-core-3.5.0.1/hsqldb/unxsogi.pro/misc/build/hsqldb/classes
    [javac] Note:
/usr/local/src/libreoffice-core-3.5.0.1/hsqldb/unxsogi.pro/misc/build/hsqldb/src/org/hsqldb/lib/java/JavaSystem.java
uses or overrides a deprecated API.
    [javac] Note: Recompile with -Xlint:deprecation for details.
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.

-javajsse:
     [echo] ant.java.hasjsse=true

classes:
    [javac] Compiling 14 source files to
/usr/local/src/libreoffice-core-3.5.0.1/hsqldb/unxsogi.pro/misc/build/hsqldb/classes
    [javac] Note:
/usr/local/src/libreoffice-core-3.5.0.1/hsqldb/unxsogi.pro/misc/build/hsqldb/src/org/hsqldb/DIProcedureInfo.java
uses unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
     [copy] Copying 41 files to
/usr/local/src/libreoffice-core-3.5.0.1/hsqldb/unxsogi.pro/misc/build/hsqldb/classes

classes14:

util:
    [javac] Compiling 47 source files to
/usr/local/src/libreoffice-core-3.5.0.1/hsqldb/unxsogi.pro/misc/build/hsqldb/classes
    [javac] Note: Some input files use or override a deprecated API.
    [javac] Note: Recompile with -Xlint:deprecation for details.
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
     [copy] Copying 11 files to
/usr/local/src/libreoffice-core-3.5.0.1/hsqldb/unxsogi.pro/misc/build/hsqldb/classes/org/hsqldb/util

swing:
    [javac] Compiling 6 source files to
/usr/local/src/libreoffice-core-3.5.0.1/hsqldb/unxsogi.pro/misc/build/hsqldb/classes
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.

hsqldb:
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/hsqldb/unxsogi.pro/misc/build/hsqldb/lib/hsqldb.jar

jar:

BUILD SUCCESSFUL
Total time: 15 seconds
Entering /usr/local/src/libreoffice-core-3.5.0.1/xml2cmp/prj

/usr/bin/bash: /usr/sfw/bin/make: No such file or directory
dmake:  Error code 127, while making 'all'
Entering /usr/local/src/libreoffice-core-3.5.0.1/tomcat

if [ -f ./unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src.exists ] ;
then mv ./unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src
./unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src_removeme ; fi
make writeable...
xargs: illegal option -- 0
xargs: Usage: xargs: [-t] [-p] [-e[eofstr]] [-E eofstr] [-I replstr]
[-i[replstr]] [-L #] [-l[#]] [-n # [-x]] [-s size] [cmd [args ...]]
find: bad option -print0
find: [-H | -L] path-list predicate-list
patching file jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/build.xml
Buildfile: build.xml

debuild:
     [echo] Building Servlet 2.4 API

prepare:
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/build
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/build/classes
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/build/docs
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/build/docs/api
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/build/examples
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/dist
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/dist/docs
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/dist/docs/api
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/dist/lib
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/dist/src
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/dist/examples

static:
     [copy] Copying 3 files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/dist

compile:
    [javac] Compiling 40 source files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/build/classes
    [javac] Note: Some input files use or override a deprecated API.
    [javac] Note: Recompile with -Xlint:deprecation for details.
    [javac] Note:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/src/share/javax/servlet/http/HttpUtils.java
uses unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
     [copy] Copying 7 files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/build/classes
     [copy] Copying 12 files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/build/classes/javax/servlet/resources

examples:
     [copy] Copying 31 files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/build/examples
    [javac] Compiling 16 source files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/build/examples/WEB-INF/classes
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/dist/examples/examples.war

javadoc:
  [javadoc] Generating Javadoc
  [javadoc] Javadoc execution
  [javadoc] Loading source files for package javax.servlet...
  [javadoc] Loading source files for package javax.servlet.http...
  [javadoc] Constructing Javadoc information...
  [javadoc] Standard Doclet version 1.6.0_26
  [javadoc] Building tree for all the packages and classes...
  [javadoc] Building index for all the packages and classes...
  [javadoc] Building index for all classes...

jar:
     [copy] Copying 1 file to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/build
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/dist/lib/servlet-api.jar

dist:
     [copy] Copying 102 files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/dist/docs/api
     [copy] Copying 64 files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr154/dist/src
     [echo] Building JSP 2.0 API

prepare:
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/classes
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/docs
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/docs/api
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/examples
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/ant
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/dist
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/dist/docs
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/dist/docs/api
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/dist/lib
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/dist/src
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/dist/examples

static:
     [copy] Copying 3 files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/dist

compile:
    [javac] Compiling 42 source files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/classes
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
     [copy] Copying 6 files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/classes/javax/servlet/jsp/resources

ant:
    [javac] Compiling 1 source file to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/ant
    [javac] Note:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/src/ant/task/Txt2Html.java
uses or overrides a deprecated API.
    [javac] Note: Recompile with -Xlint:deprecation for details.
    [javac] Note:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/src/ant/task/Txt2Html.java
uses unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.

examples:
     [copy] Copying 145 files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/examples
 [txt2html] Converted 1 file to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/examples/jsp2/simpletag
 [txt2html] Converted 4 files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/examples/jsp2/simpletag
 [txt2html] Converted 5 files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/examples/jsp2/simpletag
 [txt2html] Converted 1 file to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/examples/jsp2/jspattribute
 [txt2html] Converted 4 files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/examples/jsp2/jspattribute
 [txt2html] Converted 4 files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/examples/cal
 [txt2html] Converted 1 file to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/examples/jsptoserv
 [txt2html] Converted 1 file to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/examples/jsp2/el
 [txt2html] Converted 1 file to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/examples/jsp2/misc
 [txt2html] Converted 4 files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/examples/jsp2/tagfiles
 [txt2html] Converted 36 files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/examples
    [javac] Compiling 36 source files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/examples/WEB-INF/classes
    [javac] Note: Some input files use or override a deprecated API.
    [javac] Note: Recompile with -Xlint:deprecation for details.
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
    [javac] Compiling 1 source file to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/examples/plugin/applet
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/dist/examples/examples.war

javadoc:
  [javadoc] Generating Javadoc
  [javadoc] Javadoc execution
  [javadoc] Loading source files for package javax.servlet.jsp...
  [javadoc] Loading source files for package javax.servlet.jsp.el...
  [javadoc] Loading source files for package javax.servlet.jsp.tagext...
  [javadoc] Constructing Javadoc information...
  [javadoc] Standard Doclet version 1.6.0_26
  [javadoc] Building tree for all the packages and classes...
  [javadoc] Generating
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/docs/api/javax/servlet/jsp/tagext//package-summary.html...
  [javadoc] Copying file
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/src/share/javax/servlet/jsp/tagext/doc-files/TagProtocol.gif
to directory /usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/docs/api/javax/servlet/jsp/tagext/doc-files...
  [javadoc] Copying file
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/src/share/javax/servlet/jsp/tagext/doc-files/IterationTagProtocol.gif
to directory /usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/docs/api/javax/servlet/jsp/tagext/doc-files...
  [javadoc] Copying file
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/src/share/javax/servlet/jsp/tagext/doc-files/VariableInfo-1.gif
to directory /usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/docs/api/javax/servlet/jsp/tagext/doc-files...
  [javadoc] Copying file
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/src/share/javax/servlet/jsp/tagext/doc-files/BodyTagProtocol.gif
to directory /usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build/docs/api/javax/servlet/jsp/tagext/doc-files...
  [javadoc] Building index for all the packages and classes...
  [javadoc] Building index for all classes...

jar:
     [copy] Copying 1 file to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/build
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/dist/lib/jsp-api.jar

dist:
     [copy] Copying 114 files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/dist/docs/api
     [copy] Copying 55 files to
/usr/local/src/libreoffice-core-3.5.0.1/tomcat/unxsogi.pro/misc/build/jakarta-tomcat-5.0.30-src/jakarta-servletapi-5/jsr152/dist/src

BUILD SUCCESSFUL
Total time: 14 seconds
Entering /usr/local/src/libreoffice-core-3.5.0.1/unixODBC/prj

/usr/bin/bash: /usr/sfw/bin/make: No such file or directory
dmake:  Error code 127, while making 'all'
Entering /usr/local/src/libreoffice-core-3.5.0.1/beanshell

if [ -f ./unxsogi.pro/misc/build/BeanShell.exists ] ; then mv
./unxsogi.pro/misc/build/BeanShell
./unxsogi.pro/misc/build/BeanShell_removeme ; fi
make writeable...
find: bad option -print0
find: [-H | -L] path-list predicate-list
xargs: illegal option -- 0
xargs: Usage: xargs: [-t] [-p] [-e[eofstr]] [-E eofstr] [-I replstr]
[-i[replstr]] [-L #] [-l[#]] [-n # [-x]] [-s size] [cmd [args ...]]
patching file BeanShell/build.xml
patching file BeanShell/src/bsh/ClassGeneratorUtil.java
/usr/local/src/libreoffice-core-3.5.0.1/beanshell/unxsogi.pro/misc/build/BeanShell/src/bsh/BshMethod.java:306:
warning: [deprecation]
getAssignableForm(java.lang.Object,java.lang.Class) in bsh.Types has
been deprecated
                                        argValues[i] = Types.getAssignableForm(
                                                            ^
/usr/local/src/libreoffice-core-3.5.0.1/beanshell/unxsogi.pro/misc/build/BeanShell/src/bsh/BshMethod.java:387:
warning: [deprecation]
getAssignableForm(java.lang.Object,java.lang.Class) in bsh.Types has
been deprecated
                                ret = Types.getAssignableForm( ret,
(Class)returnType );
                                           ^
/usr/local/src/libreoffice-core-3.5.0.1/beanshell/unxsogi.pro/misc/build/BeanShell/src/bsh/BSHEnhancedForStatement.java:66:
warning: [deprecation]
setTypedVariable(java.lang.String,java.lang.Class,java.lang.Object,boolean)
in bsh.NameSpace has been deprecated
                                eachNameSpace.setTypedVariable(
                                             ^
/usr/local/src/libreoffice-core-3.5.0.1/beanshell/unxsogi.pro/misc/build/BeanShell/src/bsh/BSHPrimarySuffix.java:193:
warning: [deprecation]
getAssignableForm(java.lang.Object,java.lang.Class) in bsh.Types has
been deprecated
                                indexVal = Types.getAssignableForm(
indexVal, Integer.TYPE);
                                                ^
/usr/local/src/libreoffice-core-3.5.0.1/beanshell/unxsogi.pro/misc/build/BeanShell/src/bsh/BSHTryStatement.java:123:
warning: [deprecation]
getAssignableForm(java.lang.Object,java.lang.Class) in bsh.Types has
been deprecated
                                                thrown =
(Throwable)Types.getAssignableForm(
                                                                         ^
/usr/local/src/libreoffice-core-3.5.0.1/beanshell/unxsogi.pro/misc/build/BeanShell/src/bsh/BSHTryStatement.java:151:
warning: [deprecation]
setTypedVariable(java.lang.String,java.lang.Class,java.lang.Object,boolean)
in bsh.NameSpace has been deprecated
                                                cbNameSpace.setTypedVariable(
                                                           ^
/usr/local/src/libreoffice-core-3.5.0.1/beanshell/unxsogi.pro/misc/build/BeanShell/src/bsh/Reflect.java:129:
warning: [deprecation]
getAssignableForm(java.lang.Object,java.lang.Class) in bsh.Types has
been deprecated
                                tmpArgs[i] = Types.getAssignableForm(
args[i], types[i] );
                                                  ^
/usr/local/src/libreoffice-core-3.5.0.1/beanshell/unxsogi.pro/misc/build/BeanShell/src/bsh/Remote.java:143:
warning: [deprecation] encode(java.lang.String) in java.net.URLEncoder
has been deprecated
                sb.append( URLEncoder.encode( text ) );
                                     ^
/usr/local/src/libreoffice-core-3.5.0.1/beanshell/unxsogi.pro/misc/build/BeanShell/src/bsh/classpath/BshClassPath.java:572:
warning: [deprecation] toURL() in java.io.File has been deprecated
                                        new
File(paths[i]).getCanonicalPath() ).toURL();
                                                                               ^
/usr/local/src/libreoffice-core-3.5.0.1/beanshell/unxsogi.pro/misc/build/BeanShell/src/bsh/classpath/BshClassPath.java:644:
warning: [deprecation] toURL() in java.io.File has been deprecated
                                URL url = new File( rtjar ).toURL();
                                                           ^
/usr/local/src/libreoffice-core-3.5.0.1/beanshell/unxsogi.pro/misc/build/BeanShell/src/bsh/classpath/BshClassPath.java:689:
warning: [deprecation] toURL() in java.io.File has been deprecated
                        urls[i] =  new File(args[i]).toURL();
                                                    ^
/usr/local/src/libreoffice-core-3.5.0.1/beanshell/unxsogi.pro/misc/build/BeanShell/src/bsh/util/AWTConsole.java:223:
warning: java.awt.peer.TextComponentPeer is Sun proprietary API and
may be removed in a future release
                ((java.awt.peer.TextComponentPeer)getPeer()).setCaretPosition(
                               ^
/usr/local/src/libreoffice-core-3.5.0.1/beanshell/unxsogi.pro/misc/build/BeanShell/src/bsh/util/AWTConsole.java:223:
warning: [deprecation] getPeer() in java.awt.Component has been
deprecated
                ((java.awt.peer.TextComponentPeer)getPeer()).setCaretPosition(
                                                  ^
/usr/local/src/libreoffice-core-3.5.0.1/beanshell/unxsogi.pro/misc/build/BeanShell/src/bsh/util/AWTConsole.java:328:
warning: [deprecation] show() in java.awt.Window has been deprecated
                f.show();
                 ^
/usr/local/src/libreoffice-core-3.5.0.1/beanshell/unxsogi.pro/misc/build/BeanShell/src/bsh/util/ClassBrowser.java:412:
warning: [deprecation] show() in java.awt.Window has been deprecated
                f.show();
                 ^
/usr/local/src/libreoffice-core-3.5.0.1/beanshell/unxsogi.pro/misc/build/BeanShell/src/bsh/util/Util.java:83:
warning: [deprecation] show() in java.awt.Window has been deprecated
        win.show();
           ^
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
16 warnings

BUILD SUCCESSFUL
Total time: 7 seconds
Entering /usr/local/src/libreoffice-core-3.5.0.1/stax

Your java version already contains StAX
afms deliver
Module 'afms' delivered successfully. 1 files copied, 0 files unchanged
Entering /usr/local/src/libreoffice-core-3.5.0.1/more_fonts/fonts/ttf_gentium

if [ -f ../../unxsogi.pro/misc/build/gentiumbasic-fonts-1.10.exists ]
; then mv ../../unxsogi.pro/misc/build/gentiumbasic-fonts-1.10
../../unxsogi.pro/misc/build/gentiumbasic-fonts-1.10_removeme ; fi
make writeable...
no patch needed...
vigra deliver
Module 'vigra' delivered successfully. 82 files copied, 0 files unchanged
hsqldb deliver
Module 'hsqldb' delivered successfully. 1 files copied, 0 files unchanged
tomcat deliver
Module 'tomcat' delivered successfully. 1 files copied, 0 files unchanged
beanshell deliver
Module 'beanshell' delivered successfully. 1 files copied, 0 files unchanged
stax deliver
Module 'stax' delivered successfully. 0 files copied, 0 files unchanged
Entering /usr/local/src/libreoffice-core-3.5.0.1/more_fonts/fonts/ttf_linlibertineg

if [ -f ../../unxsogi.pro/misc/build/LinLibertineG.exists ] ; then mv
../../unxsogi.pro/misc/build/LinLibertineG
../../unxsogi.pro/misc/build/LinLibertineG_removeme ; fi
make writeable...
no patch needed...
Entering /usr/local/src/libreoffice-core-3.5.0.1/more_fonts/fonts/ttf_amt

Entering /usr/local/src/libreoffice-core-3.5.0.1/more_fonts/fonts/ttf_liberation

if [ -f ../../unxsogi.pro/misc/build/liberation-fonts-ttf-1.07.1.exists
] ; then mv ../../unxsogi.pro/misc/build/liberation-fonts-ttf-1.07.1
../../unxsogi.pro/misc/build/liberation-fonts-ttf-1.07.1_removeme ; fi
make writeable...
no patch needed...
more_fonts deliver
Module 'more_fonts' delivered successfully. 60 files copied, 0 files unchanged

=============
(16/144) Building module saxon
=============

=============
(17/144) Building module apache-commons
=============
Entering /usr/local/src/libreoffice-core-3.5.0.1/saxon

if [ -f ./unxsogi.pro/misc/build/src.exists ] ; then mv
./unxsogi.pro/misc/build/src ./unxsogi.pro/misc/build/src_removeme ;
fi
make writeable...
find: bad option -print0
find: [-H | -L] path-list predicate-list
xargs: illegal option -- 0
xargs: Usage: xargs: [-t] [-p] [-e[eofstr]] [-E eofstr] [-I replstr]
[-i[replstr]] [-L #] [-l[#]] [-n # [-x]] [-s size] [cmd [args ...]]
patching file src/build.xml
/usr/local/src/libreoffice-core-3.5.0.1/saxon/unxsogi.pro/misc/build/src/temp/j/source/net/sf/saxon/Compile.java:139:
warning: [deprecation] toURL() in java.io.File has been deprecated
                InputSource eis = new InputSource(sheetFile.toURL().toString());
                                                           ^
/usr/local/src/libreoffice-core-3.5.0.1/saxon/unxsogi.pro/misc/build/src/temp/j/source/net/sf/saxon/functions/CollatingFunction.java:103:
warning: [deprecation] toURL() in java.io.File has been deprecated
            URL currentDirectoryURL = new File(dir).toURL();
                                                   ^
/usr/local/src/libreoffice-core-3.5.0.1/saxon/unxsogi.pro/misc/build/src/temp/j/source/net/sf/saxon/functions/ResolveURI.java:115:
warning: [deprecation] toURL() in java.io.File has been deprecated
                    URL currentDirectoryURL = new File(dir).toURL();
                                                           ^
3 warnings

BUILD SUCCESSFUL
Total time: 18 seconds
Entering /usr/local/src/libreoffice-core-3.5.0.1/apache-commons/java/logging

if [ -f ../../unxsogi.pro/misc/build/commons-logging-1.1.1-src.exists
] ; then mv ../../unxsogi.pro/misc/build/commons-logging-1.1.1-src
../../unxsogi.pro/misc/build/commons-logging-1.1.1-src_removeme ; fi
make writeable...
find: bad option -print0
find: [-H | -L] path-list predicate-list
xargs: illegal option -- 0
xargs: Usage: xargs: [-t] [-p] [-e[eofstr]] [-E eofstr] [-I replstr]
[-i[replstr]] [-L #] [-l[#]] [-n # [-x]] [-s size] [cmd [args ...]]
patching file commons-logging-1.1.1-src/build.xml
Buildfile: build.xml

init:
     [echo] -------- Logging Wrapper Library 1.1.1-SNAPSHOT --------

prepare:
     [echo]
     [echo]     Log4j12: log4j-1.2.12.jar
     [echo]
     [echo]
     [echo]     LogKit: logkit-1.0.1.jar
     [echo]     Avalon-Framework: avalon-framework-4.1.3.jar
     [echo]
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/apache-commons/unxsogi.pro/misc/build/commons-logging-1.1.1-src/target
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/apache-commons/unxsogi.pro/misc/build/commons-logging-1.1.1-src/target/classes
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/apache-commons/unxsogi.pro/misc/build/commons-logging-1.1.1-src/target/conf
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/apache-commons/unxsogi.pro/misc/build/commons-logging-1.1.1-src/target/tests

static:
     [copy] Copying 1 file to
/usr/local/src/libreoffice-core-3.5.0.1/apache-commons/unxsogi.pro/misc/build/commons-logging-1.1.1-src/target/conf

discovery:

log4j12-warning:
     [echo]
     [echo]     *** WARNING ***
     [echo]     Log4j 1.2 not found: Cannot Build Log4JLogger
     [echo]

log4j13-warning:

logkit-warning:
     [echo]
     [echo]     *** WARNING ***
     [echo]     LogKit not found: Cannot Build LogKitLogger
     [echo]

jdk1.4-warning:

avalon-framework-warning:
     [echo]
     [echo]     *** WARNING ***
     [echo]     Avalon-Framework not found: Cannot Build AvalonLogger
     [echo]

compile-non-log4j:
    [javac] Compiling 11 source files to
/usr/local/src/libreoffice-core-3.5.0.1/apache-commons/unxsogi.pro/misc/build/commons-logging-1.1.1-src/target/classes

compile-1.4:

warning:

show-lib-presence:
     [echo] jdk.1.4.present=true
     [echo] log4j12.present=${log4j12.present}
     [echo] logkit.present=${logkit.present}
     [echo] avalon-framework.present=${avalon-framework.present}

compile-log4j12:

compile-log4j13:

build-jar:
     [copy] Copying 3 files to
/usr/local/src/libreoffice-core-3.5.0.1/apache-commons/unxsogi.pro/misc/build/commons-logging-1.1.1-src/target/classes
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/apache-commons/unxsogi.pro/misc/build/commons-logging-1.1.1-src/target/classes/META-INF
     [copy] Copying 1 file to
/usr/local/src/libreoffice-core-3.5.0.1/apache-commons/unxsogi.pro/misc/build/commons-logging-1.1.1-src/target/classes/META-INF
     [copy] Copying 1 file to
/usr/local/src/libreoffice-core-3.5.0.1/apache-commons/unxsogi.pro/misc/build/commons-logging-1.1.1-src/target/classes/META-INF
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/apache-commons/unxsogi.pro/misc/build/commons-logging-1.1.1-src/target/commons-logging-1.1.1-SNAPSHOT.jar
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/apache-commons/unxsogi.pro/misc/build/commons-logging-1.1.1-src/target/commons-logging-api-1.1.1-SNAPSHOT.jar
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/apache-commons/unxsogi.pro/misc/build/commons-logging-1.1.1-src/target/commons-logging-adapters-1.1.1-SNAPSHOT.jar

compile-only:

compile:

build-jar:

BUILD SUCCESSFUL
Total time: 4 seconds
saxon deliver
Module 'saxon' delivered successfully. 1 files copied, 0 files unchanged
Entering /usr/local/src/libreoffice-core-3.5.0.1/apache-commons/java/codec

Entering /usr/local/src/libreoffice-core-3.5.0.1/apache-commons/java/httpclient

Entering /usr/local/src/libreoffice-core-3.5.0.1/apache-commons/java/lang

apache-commons deliver
Module 'apache-commons' delivered successfully. 1 files copied, 3
files unchanged

=============
(18/144) Building module jfreereport
=============
Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/libbase

( cat ../../patches/common_build.patch | sed
's/libloader-1.1.3/libbase-1.1.6/g' >
../../unxsogi.pro/misc/build/libbase.patch )
if [ -f ../../unxsogi.pro/misc/build/libbase-1.1.6.exists ] ; then mv
../../unxsogi.pro/misc/build/libbase-1.1.6
../../unxsogi.pro/misc/build/libbase-1.1.6_removeme ; fi
make writeable...
find: bad option -print0
find: [-H | -L] path-list predicate-list
xargs: illegal option -- 0
xargs: Usage: xargs: [-t] [-p] [-e[eofstr]] [-E eofstr] [-I replstr]
[-i[replstr]] [-L #] [-l[#]] [-n # [-x]] [-s size] [cmd [args ...]]
patching file libbase-1.1.6/common_build.xml
patching file libbase-1.1.6/source/org/pentaho/reporting/libraries/base/boot/ModuleInitializeException.java
cp -f /usr/local/src/libreoffice-core-3.5.0.1/solver/unxsogi.pro/bin/commons-logging-1.1.1.jar
../../unxsogi.pro/class/commons-logging.jar
Buildfile: build.xml

init:
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libbase-1.1.6/bin/classes
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libbase-1.1.6/dist

compile.pre:

compile.compile:
     [copy] Copying 1 file to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libbase-1.1.6/bin/classes
    [javac] Compiling 55 source files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libbase-1.1.6/bin/classes
    [javac] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libbase-1.1.6/source/org/pentaho/reporting/libraries/base/util/ClassQueryTool.java:176:
warning: [deprecation] toURL() in java.io.File has been deprecated
    [javac]         allURLs.add(file.toURL());
    [javac]                         ^
    [javac] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libbase-1.1.6/source/org/pentaho/reporting/libraries/base/util/ClassQueryTool.java:189:
warning: [deprecation] toURL() in java.io.File has been deprecated
    [javac]         allURLs.add(file.toURL());
    [javac]                         ^
    [javac] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libbase-1.1.6/source/org/pentaho/reporting/libraries/base/util/ClassQueryTool.java:190:
warning: [deprecation] toURL() in java.io.File has been deprecated
    [javac]         jarURLs.add(file.toURL());
    [javac]                         ^
    [javac] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libbase-1.1.6/source/org/pentaho/reporting/libraries/base/util/ClassQueryTool.java:202:
warning: [deprecation] toURL() in java.io.File has been deprecated
    [javac]           allURLs.add(file.toURL());
    [javac]                           ^
    [javac] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libbase-1.1.6/source/org/pentaho/reporting/libraries/base/util/ClassQueryTool.java:215:
warning: [deprecation] toURL() in java.io.File has been deprecated
    [javac]           allURLs.add(file.toURL());
    [javac]                           ^
    [javac] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libbase-1.1.6/source/org/pentaho/reporting/libraries/base/util/ClassQueryTool.java:216:
warning: [deprecation] toURL() in java.io.File has been deprecated
    [javac]           jarURLs.add(file.toURL());
    [javac]                           ^
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
    [javac] 6 warnings

compile.src_copy:

compile.res_copy:

copy.res:

copy.res.class:

compile.lic_copy:

copy-license-lgpl:

copy-license-gpl:

compile.post:

compile:

set-build.id:

generate.manifest:
    [touch] Creating
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libbase-1.1.6/dist/MANIFEST.MF

jar:
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libbase-1.1.6/dist/libbase-1.1.6.jar

BUILD SUCCESSFUL
Total time: 5 seconds
cp -f ../../unxsogi.pro/misc/build/libbase-1.1.6/dist/libbase-1.1.6.jar
../../unxsogi.pro/class/libbase-1.1.6.jar
Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/libloader

( cat ../../patches/common_build.patch | sed
's/libloader-1.1.3/libloader-1.1.6/g' >
../../unxsogi.pro/misc/build/libloader.patch )
if [ -f ../../unxsogi.pro/misc/build/libloader-1.1.6.exists ] ; then
mv ../../unxsogi.pro/misc/build/libloader-1.1.6
../../unxsogi.pro/misc/build/libloader-1.1.6_removeme ; fi
make writeable...
find: bad option -print0
find: [-H | -L] path-list predicate-list
xargs: illegal option -- 0
xargs: Usage: xargs: [-t] [-p] [-e[eofstr]] [-E eofstr] [-I replstr]
[-i[replstr]] [-L #] [-l[#]] [-n # [-x]] [-s size] [cmd [args ...]]
patching file libloader-1.1.6/common_build.xml
patching file libloader-1.1.6/source/org/pentaho/reporting/libraries/resourceloader/ResourceException.java
Buildfile: build.xml

init:
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libloader-1.1.6/bin/classes
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libloader-1.1.6/dist

compile.pre:

compile.compile:
     [copy] Copying 9 files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libloader-1.1.6/bin/classes
    [javac] Compiling 88 source files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libloader-1.1.6/bin/classes
    [javac] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libloader-1.1.6/source/org/pentaho/reporting/libraries/resourceloader/loader/file/FileResourceLoader.java:173:
warning: [deprecation] toURL() in java.io.File has been deprecated
    [javac]       return file.toURL();
    [javac]                  ^
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
    [javac] 1 warning

compile.src_copy:

compile.res_copy:

copy.res:

copy.res.class:

compile.lic_copy:

copy-license-lgpl:

copy-license-gpl:

compile.post:

compile:

set-build.id:

generate.manifest:
    [touch] Creating
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libloader-1.1.6/dist/MANIFEST.MF

jar:
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libloader-1.1.6/dist/libloader-1.1.6.jar

BUILD SUCCESSFUL
Total time: 4 seconds
cp -f ../../unxsogi.pro/misc/build/libloader-1.1.6/dist/libloader-1.1.6.jar
../../unxsogi.pro/class/libloader-1.1.6.jar
Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/sac

if [ -f ../../unxsogi.pro/misc/build/sac-1.3.exists ] ; then mv
../../unxsogi.pro/misc/build/sac-1.3
../../unxsogi.pro/misc/build/sac-1.3_removeme ; fi
make writeable...
find: bad option -print0
find: [-H | -L] path-list predicate-list
xargs: illegal option -- 0
xargs: Usage: xargs: [-t] [-p] [-e[eofstr]] [-E eofstr] [-I replstr]
[-i[replstr]] [-L #] [-l[#]] [-n # [-x]] [-s size] [cmd [args ...]]
patching file sac-1.3/build.xml
Buildfile: build.xml

prepare:
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/src
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/build
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/build/classes
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/build/lib
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/build/api
     [copy] Copying 29 files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/src/org

classes:
    [javac] Compiling 29 source files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/build/classes

jar:
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/build/lib/sac.jar

javadoc:
  [javadoc] Generating Javadoc
  [javadoc] Javadoc execution
  [javadoc] Loading source files for package org.w3c.css.sac...
  [javadoc] Loading source files for package org.w3c.css.sac.helpers...
  [javadoc] Constructing Javadoc information...
  [javadoc] Standard Doclet version 1.6.0_26
  [javadoc] Building tree for all the packages and classes...
  [javadoc] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/src/org/w3c/css/sac/ConditionFactory.java:105:
warning - @param argument "value" is not a parameter name.
  [javadoc] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/src/org/w3c/css/sac/ConditionFactory.java:153:
warning - @param argument "localName" is not a parameter name.
  [javadoc] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/src/org/w3c/css/sac/ConditionFactory.java:153:
warning - @param argument "specified" is not a parameter name.
  [javadoc] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/src/org/w3c/css/sac/CSSException.java:78:
warning - @param argument "a" is not a parameter name.
  [javadoc] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/src/org/w3c/css/sac/CSSException.java:87:
warning - @param argument "a" is not a parameter name.
  [javadoc] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/src/org/w3c/css/sac/DocumentHandler.java:32:
warning - @param argument "uri" is not a parameter name.
  [javadoc] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/src/org/w3c/css/sac/DocumentHandler.java:47:
warning - @param argument "uri" is not a parameter name.
  [javadoc] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/src/org/w3c/css/sac/DocumentHandler.java:68:
warning - @param argument "at-rule" is not a parameter name.
  [javadoc] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/src/org/w3c/css/sac/DocumentHandler.java:92:
warning - @param argument "defaultNamepaceURI" is not a parameter
name.
  [javadoc] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/src/org/w3c/css/sac/DocumentHandler.java:140:
warning - @param argument "media" is not a parameter name.
  [javadoc] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/src/org/w3c/css/sac/Parser.java:157:
warning - @param argument "styleValue" is not a parameter name.
  [javadoc] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/src/org/w3c/css/sac/SelectorFactory.java:164:
warning - @param argument "adjacent" is not a parameter name.
  [javadoc] Building index for all the packages and classes...
  [javadoc] Building index for all classes...
  [javadoc] Generating
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/sac-1.3/build/api/stylesheet.css...
  [javadoc] 12 warnings

all:

BUILD SUCCESSFUL
Total time: 5 seconds
cp -f ../../unxsogi.pro/misc/build/sac-1.3/build/lib/sac.jar
../../unxsogi.pro/class/sac.jar
Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/libserializer

( cat ../../patches/common_build.patch | sed
's/libloader-1.1.3/libserializer-1.1.6/g' >
../../unxsogi.pro/misc/build/libserializer.patch )
if [ -f ../../unxsogi.pro/misc/build/libserializer-1.1.6.exists ] ;
then mv ../../unxsogi.pro/misc/build/libserializer-1.1.6
../../unxsogi.pro/misc/build/libserializer-1.1.6_removeme ; fi
make writeable...
find: bad option -print0
find: [-H | -L] path-list predicate-list
xargs: illegal option -- 0
xargs: Usage: xargs: [-t] [-p] [-e[eofstr]] [-E eofstr] [-I replstr]
[-i[replstr]] [-L #] [-l[#]] [-n # [-x]] [-s size] [cmd [args ...]]
patching file libserializer-1.1.6/common_build.xml
Buildfile: build.xml

init:
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libserializer-1.1.6/bin/classes
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libserializer-1.1.6/dist

compile.pre:

compile.compile:
     [copy] Copying 1 file to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libserializer-1.1.6/bin/classes
    [javac] Compiling 17 source files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libserializer-1.1.6/bin/classes
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.

compile.src_copy:

compile.res_copy:

copy.res:

copy.res.class:

compile.lic_copy:

copy-license-lgpl:

copy-license-gpl:

compile.post:

compile:

set-build.id:

generate.manifest:
    [touch] Creating
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libserializer-1.1.6/dist/MANIFEST.MF

jar:
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libserializer-1.1.6/dist/libserializer-1.1.6.jar

BUILD SUCCESSFUL
Total time: 3 seconds
cp -f ../../unxsogi.pro/misc/build/libserializer-1.1.6/dist/libserializer-1.1.6.jar
../../unxsogi.pro/class/libserializer-1.1.6.jar
Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/flute

( cat ../../patches/common_build.patch | sed
's/libloader-1.1.3/flute-1.1.6/g' >
../../unxsogi.pro/misc/build/flute.patch )
if [ -f ../../unxsogi.pro/misc/build/flute-1.1.6.exists ] ; then mv
../../unxsogi.pro/misc/build/flute-1.1.6
../../unxsogi.pro/misc/build/flute-1.1.6_removeme ; fi
make writeable...
find: bad option -print0
find: [-H | -L] path-list predicate-list
xargs: illegal option -- 0
xargs: Usage: xargs: [-t] [-p] [-e[eofstr]] [-E eofstr] [-I replstr]
[-i[replstr]] [-L #] [-l[#]] [-n # [-x]] [-s size] [cmd [args ...]]
patching file flute-1.1.6/common_build.xml
Buildfile: build.xml

init:
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/flute-1.1.6/bin/classes
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/flute-1.1.6/dist

compile.pre:

compile.compile:
     [copy] Copying 1 file to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/flute-1.1.6/bin/classes
    [javac] Compiling 32 source files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/flute-1.1.6/bin/classes
    [javac] Note:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/flute-1.1.6/source/org/w3c/flute/parser/Parser.java
uses unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.

compile.src_copy:

compile.res_copy:

copy.res:

copy.res.class:

compile.lic_copy:

copy-license-lgpl:

copy-license-gpl:

compile.post:

compile:

set-build.id:

generate.manifest:
    [touch] Creating
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/flute-1.1.6/dist/MANIFEST.MF

jar:
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/flute-1.1.6/dist/flute-1.1.6.jar

BUILD SUCCESSFUL
Total time: 4 seconds
cp -f ../../unxsogi.pro/misc/build/flute-1.1.6/dist/flute-1.1.6.jar
../../unxsogi.pro/class/flute-1.1.6.jar
Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/libformula

( cat ../../patches/common_build.patch | sed
's/libloader-1.1.3/libformula-1.1.7/g' >
../../unxsogi.pro/misc/build/libformula.patch )
if [ -f ../../unxsogi.pro/misc/build/libformula-1.1.7.exists ] ; then
mv ../../unxsogi.pro/misc/build/libformula-1.1.7
../../unxsogi.pro/misc/build/libformula-1.1.7_removeme ; fi
make writeable...
find: bad option -print0
find: [-H | -L] path-list predicate-list
xargs: illegal option -- 0
xargs: Usage: xargs: [-t] [-p] [-e[eofstr]] [-E eofstr] [-I replstr]
[-i[replstr]] [-L #] [-l[#]] [-n # [-x]] [-s size] [cmd [args ...]]
patching file libformula-1.1.7/common_build.xml
Buildfile: build.xml

init:
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libformula-1.1.7/bin/classes
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libformula-1.1.7/dist

compile.pre:

compile.compile:
     [copy] Copying 103 files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libformula-1.1.7/bin/classes
    [javac] Compiling 287 source files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libformula-1.1.7/bin/classes
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.

compile.src_copy:

compile.res_copy:

copy.res:

copy.res.class:

compile.lic_copy:

copy-license-lgpl:

copy-license-gpl:

compile.post:

compile:

set-build.id:

generate.manifest:
    [touch] Creating
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libformula-1.1.7/dist/MANIFEST.MF

jar:
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libformula-1.1.7/dist/libformula-1.1.7.jar

BUILD SUCCESSFUL
Total time: 6 seconds
cp -f ../../unxsogi.pro/misc/build/libformula-1.1.7/dist/libformula-1.1.7.jar
../../unxsogi.pro/class/libformula-1.1.7.jar
Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/libxml

( cat ../../patches/common_build.patch | sed
's/libloader-1.1.3/libxml-1.1.7/g' >
../../unxsogi.pro/misc/build/libxml.patch )
if [ -f ../../unxsogi.pro/misc/build/libxml-1.1.7.exists ] ; then mv
../../unxsogi.pro/misc/build/libxml-1.1.7
../../unxsogi.pro/misc/build/libxml-1.1.7_removeme ; fi
make writeable...
find: bad option -print0
find: [-H | -L] path-list predicate-list
xargs: illegal option -- 0
xargs: Usage: xargs: [-t] [-p] [-e[eofstr]] [-E eofstr] [-I replstr]
[-i[replstr]] [-L #] [-l[#]] [-n # [-x]] [-s size] [cmd [args ...]]
patching file libxml-1.1.7/common_build.xml
Buildfile: build.xml

init:
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libxml-1.1.7/bin/classes
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libxml-1.1.7/dist

compile.pre:

compile.compile:
     [copy] Copying 3 files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libxml-1.1.7/bin/classes
    [javac] Compiling 35 source files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libxml-1.1.7/bin/classes
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.

compile.src_copy:

compile.res_copy:

copy.res:

copy.res.class:

compile.lic_copy:

copy-license-lgpl:

copy-license-gpl:

compile.post:

compile:

set-build.id:

generate.manifest:
    [touch] Creating
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libxml-1.1.7/dist/MANIFEST.MF

jar:
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libxml-1.1.7/dist/libxml-1.1.7.jar

BUILD SUCCESSFUL
Total time: 4 seconds
cp -f ../../unxsogi.pro/misc/build/libxml-1.1.7/dist/libxml-1.1.7.jar
../../unxsogi.pro/class/libxml-1.1.7.jar
Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/libfonts

( cat ../../patches/common_build.patch | sed
's/libloader-1.1.3/libfonts-1.1.6/g' >
../../unxsogi.pro/misc/build/libfonts.patch )
if [ -f ../../unxsogi.pro/misc/build/libfonts-1.1.6.exists ] ; then mv
../../unxsogi.pro/misc/build/libfonts-1.1.6
../../unxsogi.pro/misc/build/libfonts-1.1.6_removeme ; fi
make writeable...
xargs: illegal option -- 0
xargs: Usage: xargs: [-t] [-p] [-e[eofstr]] [-E eofstr] [-I replstr]
[-i[replstr]] [-L #] [-l[#]] [-n # [-x]] [-s size] [cmd [args ...]]
find: bad option -print0
find: [-H | -L] path-list predicate-list
patching file libfonts-1.1.6/common_build.xml
patching file libfonts-1.1.6/source/org/pentaho/reporting/libraries/fonts/FontException.java
Buildfile: build.xml

init:
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libfonts-1.1.6/bin/classes
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libfonts-1.1.6/dist

compile.pre:

compile.compile:
     [copy] Copying 3 files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libfonts-1.1.6/bin/classes
    [javac] Compiling 154 source files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libfonts-1.1.6/bin/classes
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.

compile.src_copy:

compile.res_copy:

copy.res:

copy.res.class:

compile.lic_copy:

copy-license-lgpl:

copy-license-gpl:

compile.post:

compile:

set-build.id:

generate.manifest:
    [touch] Creating
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libfonts-1.1.6/dist/MANIFEST.MF

jar:
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/libfonts-1.1.6/dist/libfonts-1.1.6.jar

BUILD SUCCESSFUL
Total time: 6 seconds
cp -f ../../unxsogi.pro/misc/build/libfonts-1.1.6/dist/libfonts-1.1.6.jar
../../unxsogi.pro/class/libfonts-1.1.6.jar
Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/librepository

( cat ../../patches/common_build.patch | sed
's/libloader-1.1.3/librepository-1.1.6/g' >
../../unxsogi.pro/misc/build/librepository.patch )
if [ -f ../../unxsogi.pro/misc/build/librepository-1.1.6.exists ] ;
then mv ../../unxsogi.pro/misc/build/librepository-1.1.6
../../unxsogi.pro/misc/build/librepository-1.1.6_removeme ; fi
make writeable...
xargs: illegal option -- 0
xargs: Usage: xargs: [-t] [-p] [-e[eofstr]] [-E eofstr] [-I replstr]
[-i[replstr]] [-L #] [-l[#]] [-n # [-x]] [-s size] [cmd [args ...]]
find: bad option -print0
find: [-H | -L] path-list predicate-list
patching file librepository-1.1.6/common_build.xml
patching file librepository-1.1.6/source/org/pentaho/reporting/libraries/repository/ContentIOException.java
Buildfile: build.xml

init:
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/librepository-1.1.6/bin/classes
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/librepository-1.1.6/dist

compile.pre:

compile.compile:
     [copy] Copying 1 file to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/librepository-1.1.6/bin/classes
    [javac] Compiling 43 source files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/librepository-1.1.6/bin/classes
    [javac] /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/librepository-1.1.6/source/org/pentaho/reporting/libraries/repository/file/FileRepository.java:107:
warning: [deprecation] toURL() in java.io.File has been deprecated
    [javac]     return root.getBackend().toURL();
    [javac]                             ^
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
    [javac] 1 warning

compile.src_copy:

compile.res_copy:

copy.res:

copy.res.class:

compile.lic_copy:

copy-license-lgpl:

copy-license-gpl:

compile.post:

compile:

set-build.id:

generate.manifest:
    [touch] Creating
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/librepository-1.1.6/dist/MANIFEST.MF

jar:
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/librepository-1.1.6/dist/librepository-1.1.6.jar

BUILD SUCCESSFUL
Total time: 5 seconds
cp -f ../../unxsogi.pro/misc/build/librepository-1.1.6/dist/librepository-1.1.6.jar
../../unxsogi.pro/class/librepository-1.1.6.jar
Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/liblayout

if [ -f ../../unxsogi.pro/misc/build/liblayout-0.2.10.exists ] ; then
mv ../../unxsogi.pro/misc/build/liblayout-0.2.10
../../unxsogi.pro/misc/build/liblayout-0.2.10_removeme ; fi
make writeable...
find: bad option -print0
find: [-H | -L] path-list predicate-list
xargs: illegal option -- 0
xargs: Usage: xargs: [-t] [-p] [-e[eofstr]] [-E eofstr] [-I replstr]
[-i[replstr]] [-L #] [-l[#]] [-n # [-x]] [-s size] [cmd [args ...]]
patching file liblayout-0.2.10/build.xml
Hunk #1 succeeded at 24 with fuzz 1.
Buildfile: build.xml

prepare:
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/liblayout-0.2.10/build
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/liblayout-0.2.10/build/classes
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/liblayout-0.2.10/build/lib
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/liblayout-0.2.10/build/api

classes:
    [javac] Compiling 799 source files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/liblayout-0.2.10/build/classes
    [javac] Note: Some input files use or override a deprecated API.
    [javac] Note: Recompile with -Xlint:deprecation for details.
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
     [copy] Copying 5 files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/liblayout-0.2.10/build/classes

jar:
     [copy] Copying 1 file to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/liblayout-0.2.10/build
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/liblayout-0.2.10/build/lib/liblayout.jar

BUILD SUCCESSFUL
Total time: 10 seconds
cp -f ../../unxsogi.pro/misc/build/liblayout-0.2.10/build/lib/liblayout.jar
../../unxsogi.pro/class/liblayout-0.2.10.jar
Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/jfreereport

if [ -f ../../unxsogi.pro/misc/build/flow-engine-0.9.4.exists ] ; then
mv ../../unxsogi.pro/misc/build/flow-engine-0.9.4
../../unxsogi.pro/misc/build/flow-engine-0.9.4_removeme ; fi
make writeable...
find: bad option -print0
find: [-H | -L] path-list predicate-list
xargs: illegal option -- 0
xargs: Usage: xargs: [-t] [-p] [-e[eofstr]] [-E eofstr] [-I replstr]
[-i[replstr]] [-L #] [-l[#]] [-n # [-x]] [-s size] [cmd [args ...]]
patching file flow-engine-0.9.4/build.xml
Hunk #1 succeeded at 24 with fuzz 1.
Buildfile: build.xml

prepare:
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/flow-engine-0.9.4/build
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/flow-engine-0.9.4/build/classes
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/flow-engine-0.9.4/build/lib
    [mkdir] Created dir:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/flow-engine-0.9.4/build/api

classes:
    [javac] Compiling 255 source files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/flow-engine-0.9.4/build/classes
    [javac] Note: Some input files use or override a deprecated API.
    [javac] Note: Recompile with -Xlint:deprecation for details.
    [javac] Note: Some input files use unchecked or unsafe operations.
    [javac] Note: Recompile with -Xlint:unchecked for details.
     [copy] Copying 29 files to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/flow-engine-0.9.4/build/classes

jar:
     [copy] Copying 1 file to
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/flow-engine-0.9.4/build
      [jar] Building jar:
/usr/local/src/libreoffice-core-3.5.0.1/jfreereport/unxsogi.pro/misc/build/flow-engine-0.9.4/build/lib/flow-engine.jar

BUILD SUCCESSFUL
Total time: 7 seconds
cp -f ../../unxsogi.pro/misc/build/flow-engine-0.9.4/build/lib/flow-engine.jar
../../unxsogi.pro/class/flow-engine-0.9.4.jar
jfreereport deliver
Module 'jfreereport' delivered successfully. 13 files copied, 0 files unchanged

-----------------------------------------------------------------------
        Oh dear - something failed during the build - sorry !
  For more help with debugging build errors, please see the section in:
            http://wiki.documentfoundation.org/Development

  internal build errors:

ERROR: error 65280 occurred while making
/usr/local/src/libreoffice-core-3.5.0.1/unixODBC/prj
ERROR: error 65280 occurred while making
/usr/local/src/libreoffice-core-3.5.0.1/nss
ERROR: error 65280 occurred while making
/usr/local/src/libreoffice-core-3.5.0.1/soltools/mkdepend
ERROR: error 65280 occurred while making
/usr/local/src/libreoffice-core-3.5.0.1/xml2cmp/prj
ERROR: error 65280 occurred while making
/usr/local/src/libreoffice-core-3.5.0.1/stlport
ERROR: error 65280 occurred while making
/usr/local/src/libreoffice-core-3.5.0.1/sane/prj
ERROR: error 65280 occurred while making
/usr/local/src/libreoffice-core-3.5.0.1/lpsolve

 it seems you are using a threaded build, which means that the
 actual compile error is probably hidden far above, and could be
 inside any of these other modules:
     sane soltools stlport nss xml2cmp unixODBC
 please re-run build inside each one to isolate the problem.
-----------------------------------------------------------------------

/usr/bin/bash
cd /usr/local/src/libreoffice-core-3.5.0.1
source ./Env.Host.sh
cd lpsolve
rm -Rf /usr/local/src/libreoffice-core-3.5.0.1/lpsolve/unxsogi.pro #
optional module 'clean'
build

when the problem is isolated and fixed exit and re-run 'make' from the top-level
gmake[1]: *** [build] Error 1
gmake[1]: Leaving directory `/usr/local/src/libreoffice-core-3.5.0.1'
gmake: *** [source-env-and-recurse] Error 2
gdriggs@drjones:/usr/local/src/libreoffice-core-3.5.0.1$ MAKE=gmake
PYTHON_LIBS="-L/usr/lib/python2.6"
PYTHON_CFLAGS="-I/usr/include/python2.6" ./configure
--with-jdk-home=/usr/jdk/latest
--with-junit=/usr/share/lib/java/junit.jar --disable-mozilla
--disable-odk --enable-binfilter --enable-python=auto
--disable-ccache --disable-epm --disable-neon --disable-odk
--disable-opengl --disable-systray --with-alloc=system
--without-stlport --with-system-libxml --withfonts
configure: error: unrecognized option: --withfonts
Try `./configure --help' for more information.
gdriggs@drjones:/usr/local/src/libreoffice-core-3.5.0.1$ MAKE=gmake
PYTHON_LIBS="-L/usr/lib/python2.6"
PYTHON_CFLAGS="-I/usr/include/python2.6" ./configure
--with-jdk-home=/usr/jdk/latest
--with-junit=/usr/share/lib/java/junit.jar --disable-mozilla
--disable-odk --enable-binfilter --enable-python=auto
--disable-ccache --disable-epm --disable-neon --disable-odk
--disable-opengl --disable-systray --with-alloc=system
--without-stlport --with-system-libxml --with-fonts
********************************************************************
*
*   Running LibreOffice build configuration.
*
********************************************************************

checking build system type... i386-pc-solaris2.11
checking host system type... i386-pc-solaris2.11
checking for sed... /usr/gnu/bin/sed
checking the Solaris operating system release... ok (11)
checking the processor type... ok (i386)
checking for grep that handles long lines and -e... /usr/gnu/bin/grep
checking for egrep... /usr/gnu/bin/grep -E
checking for gawk... gawk
checking for gawk... /usr/bin/gawk
checking for bash... /usr/bin/bash
checking for GNU or BSD tar... gtar
checking gcc home... /usr
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for gcc... /usr/bin/gcc
checking the GNU C compiler version... checked (gcc 3.4.3)
checking for -Bsymbolic-functions linker support ... not found
checking whether to enable crashdump feature... no
checking whether to turn warnings to errors... no
checking whether to do a debug build... no
checking whether to build with additional debug utilities... no, full
product build
checking whether to use linkoo for the smoketest installation... yes
checking whether to use link-time optimization... no
checking whether to include symbols... no
checking whether to strip the solver or not.... yes
checking whether cups support is present... checking for
cupsPrintFiles in -lcups... yes
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking cups/cups.h usability... yes
checking cups/cups.h presence... yes
checking for cups/cups.h... yes
checking whether we need fontconfig... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for FONTCONFIG... yes
checking whether we want to fetch tarballs... yes
checking whether to enable filters for legacy binary file formats
(StarOffice 5.2)... yes
checking whether to build help... yes
checking whether to use RPATH in shared libraries... yes
checking whether to include MySpell dictionaries... yes
checking whether to use dicts from external paths... no
checking whether to enable pch feature... no, obsolete
checking for GNU make... gmake
checking the GNU make version... gmake 3.81
checking for GNU make bug 20033... yes, disable parallelism
checking for --hash-style gcc linker support ... no
checking for perl... /usr/bin/perl
checking the Perl version... checked (perl 5)
checking for required Perl modules... all modules found
checking for pkg-config... (cached) /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for ar... ar
checking for nm... nm
checking for objdump... objdump
checking for ranlib... ranlib
checking for strip... strip
checking for ANSI C header files... (cached) yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking the GNU C++ compiler version... checked (g++ 3.4.3)
checking whether g++ has the enum bug... no
checking how to run the C++ preprocessor... g++ -E
checking size of long... 4
checking size of short... 2
checking size of int... 4
checking size of long long... 8
checking size of double... 8
checking size of void*... 4
checking alignment of short... 2
checking alignment of int... 4
checking alignment of long... 4
checking alignment of double... 4
checking whether byte ordering is bigendian... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking valgrind.h usability... no
checking valgrind.h presence... no
checking for valgrind.h... no
checking valgrind.h usability... no
checking valgrind.h presence... no
checking for valgrind.h... no
checking for g++ include path...
/usr/sfw/lib/gcc/i386-pc-solaris2.11/3.4.3/../../../../include/c++/3.4.3
checking Whether building STLPort library makes sense... yes
checking Whether STLPort library will be actually built... no
checking whether g++ supports thread safe statics... no
checking whether gcc supports -fvisibility=hidden... no
checking whether gcc supports -Wno-long-double... no
checking whether gcc supports -mno-avx... no
checking whether gcc supports -std=c++0x without Language Defect 757... no
checking which memory allocator to use... system
checking for malloc... yes
checking for realloc... yes
checking for calloc... yes
checking for free... yes
checking for posix_fallocate... yes
checking whether to add custom build version... no
checking whether to build with Java support... yes
checking the installed JDK... checked (JDK 1.6.0_26)
checking for target Java bytecode version... 1.6
checking for jawt lib name... -ljawt
checking for dmake... no
dmake will be built on ./bootstrap
checking whether to enable EPM for packing... no
checking for gperf... /usr/bin/gperf
checking gperf version... OK
checking whether to build the ODK... no
checking whether to provide libstdc++/libgcc_s in the installset... yes
checking which zlib to use... external
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for deflate in -lz... yes
checking which jpeg to use... internal
checking which expat to use... internal
checking which libvisio to use... internal
checking which libcmis to use... internal
checking which libwpd to use... internal
checking which cppunit to use... internal
checking whether freetype is available... checking for FREETYPE... yes
checking which libwps to use... internal
checking which libwpg to use... internal
checking for FT_GlyphSlot_Embolden in -lfreetype... yes
checking which libxslt to use... external
checking for LIBXSLT... yes
checking for xsltproc... /usr/bin/xsltproc
checking which libxml to use... external
checking for LIBXML... yes
checking which Python to use... checking below
checking for a Python interpreter with version >= 2.6... python
checking for python... /usr/bin/python
checking for python version... 2.6
checking for python platform... sunos5
checking for python script directory... ${prefix}/lib/python2.6/site-packages
checking for python extension module directory...
${exec_prefix}/lib/python2.6/site-packages
checking Python.h usability... no
checking Python.h presence... no
checking for Python.h... no
checking which db to use... internal
checking which lucene to use... internal
checking whether to build the MySQL Connector extension... no
checking which hsqldb to use... internal
checking which beanshell to use... internal
checking which saxon to use... internal
checking whether building the stax is required... yes (no system saxon
and no prebuilt copy)
checking which libcurl to use... internal
checking which boost to use... internal
checking which mdds to use... internal
checking which hash container mdds shall use... boost::unordered_map
checking which vigra to use... internal
checking which odbc headers to use... internal
checking whether to enable build of Mozilla... no
checking whether to build Mozilla addressbook connectivity... no
checking whether to build XML Security support... yes
checking whether to build LDAP configuration backend... no. Either
Mozilla or OpenLDAP required
checking which Mozilla to use... none
checking which NSS to use... internal
checking which mozilla headers to use... internal
checking which sane header to use... internal
checking which icu to use... internal
checking whether to enable graphite support... no
checking whether to use system SampleICC... no
checking wether to build nsplugin extension... yes
checking for X... libraries , headers
checking for gethostbyname... no
checking for gethostbyname in -lnsl... yes
checking for connect... no
checking for connect in -lsocket... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for XOpenDisplay in -lX11... yes
checking for XauDisposeAuth in -lXau... yes
checking for X11/Composite.h... yes
checking whether to use internal X11 extensions headers... no
checking whether to use Xrender... yes
checking for XRenderQueryVersion in -lXrender... yes
checking which Xrender headers to use... external
checking X11/extensions/Xrender.h usability... yes
checking X11/extensions/Xrender.h presence... yes
checking for X11/extensions/Xrender.h... yes
checking whether to enable RandR support... yes
checking for XRANDR... yes
checking whether to use neon... no
checking which libssl to use... internal
checking which redland library to use... internal
checking which libhunspell to use... internal
checking which altlinuxhyph to use... internal
checking which mythes to use... internal
checking which lpsolve to use... internal
checking which libexttextcat to use... internal
checking for getopt... yes
checking for readdir_r... yes
checking for bison... /usr/bin/bison
checking the bison version... checked (/usr/bin/bison 2.3)
checking for flex... /usr/bin/flex
checking for patch... /usr/gnu/bin/patch
checking whether /usr/gnu/bin/patch is GNU patch... yes
checking whether /usr/gnu/bin/cp is GNU cp from coreutils with
preserve= support... yes
checking for zip... /usr/local/bin/zip
checking for unzip... /usr/bin/unzip
checking which VCLplugs shall be built... gtk
checking whether to enable GConf support... yes
checking for GCONF... yes
checking whether to enable GNOME VFS support... yes
checking for GNOMEVFS... yes
checking for GTK... yes
checking for GTHREAD... yes
checking whether to enable Gtk print dialog support... checking for
GTK_PRINT... yes
checking whether to enable DBUS support... no
checking whether to enable GIO support... no
checking for LIBPNG... yes
checking whether to enable libpng linking in quickstarter... yes
checking whether to enable the GStreamer avmedia backend... yes
checking for GSTREAMER... yes
checking whether to build the OpenGL Transitions component... no
checking whether to build the Presentation Minimizer extension... yes
checking whether to build the Presenter Console extension... yes
checking whether to build the PDF Import extension... yes
checking which pdf backend to use... internal
checking for sdext module... checking whether to build the Wiki
Publisher extension... no
checking whether to build the Report Builder extension... yes
checking for reportbuilder module... checking which jfreereport libs
to use... internal
checking for jfreereport module... checking which Apache commons-*
libs to use... internal
checking whether to build extension for support of scripts in BeanShell... no
checking whether to build extension for support of scripts in JavaScript... no
checking whether to enable the lockdown pieces... no
checking whether to enable evolution 2 support... no
checking whether to enable KDE address book support... no
checking whether to include MathMLDTD... no
checking which themes to include...  default crystal hicontrast oxygen tango
checking for helppack integration... integration
checking for extensions integration... yes, use integration
checking for Watch Window extension integration... no
checking for SmART Gallery (Diagram) extension integration... no
checking for Validator extension integration... no
checking for Barcode extension integration... no
checking for ConvertTextToNumber extension integration... no
checking for Numbertext extension integration... no
checking for Hungarian Cross-reference Toolbar extension integration... no
checking for Typography Toolbar extension integration... no
checking for Google Docs extension integration... no
checking for NLPSolver extension integration... no
checking for LanguageTool extension integration... no
checking for oooblogger extension integration... no
checking for Sun Professional Template Pack integration (only
supported languages displayed)... no integration
checking whether to include third-party fonts... yes
checking whether to include Agfa Monotype fonts... no
checking whether to include PPDs... yes
checking whether to include AFMs... yes
checking whether to include extra galleries... no
checking whether to include extra templates... no
checking whether to include extra samples... no
checking whether to include extra fonts... no
checking whether to download OxygenOffice branding and set custom settings... no
checking whether to build global menu support... no
checking whether to enable online update... no
checking whether build target is Release Build... no
checking whether to create MSI with LIMITUI=1 (silent install)... no
checking whether and how to use Xinerama... no
checking what librsvg to use... checking further
checking for LIBRSVG... yes
checking whether to use the system cairo... no
checking whether to use the system gdk-pixbuf... yes
checking whether to use the system GLib... yes
checking whether to use the system gettext runtime... yes
checking whether to use the system libcroco... yes
checking whether to use the system pango... yes
checking whether to use the system libgsf... yes
checking whether to use the system libpng... no
checking whether to use the system libjpeg... yes
checking whether to use specific JVM search path at runtime... no
checking for jakarta-ant... no
checking for ant... /usr/bin/ant
checking if /usr/bin/ant works... Ant works
checking Ant lib directory... Ant lib directory found.
checking whether Ant is >= 1.6.0... yes, 1.7.1
checking for JUnit 4... /usr/share/lib/java/junit.jar
checking for product version... 3.5
checking which languages to be built... en-US
checking for custom 'intro' progress bar color... none
checking for custom 'intro' progress bar size... none
checking for custom 'intro' progress bar position... none
checking for custom 'intro' progress bar frame color... none
checking for alternative branding images directory... none
checking for yet another 'intro' bitmap... none
checking for yet another 'about' bitmap... none
checking for yet another 'start center left' bitmap... none
checking for yet another 'start center right' bitmap... none
checking for yet another 'start center rtl left' bitmap... none
checking for yet another 'start center rtl right' bitmap... none
checking for yet another 'start center space' bitmap... none
checking for vendor... not set
checking for UNIX wrapper name... not set
checking whether to install the compat oo* wrappers... no
checking for product name... LibreOffice
checking for install dirname... libreoffice
checking for prefix... /usr/local
checking for libdir... /usr/local/lib
checking for data dir... /usr/local/share
checking for man dir... /usr/local/share/man
checking for doc dir... /usr/local/share/doc/libreoffice
checking for install dir... /usr/local/lib/libreoffice
checking whether to statically link to Gtk... no
checking build verbosity... not set
checking whether to use zenity during build... yes
checking for zenity... no
checking whether to enable dependency tracking... yes
checking for number of processors to use... grep: /proc/cpuinfo: No
such file or directory
1
checking whether to create a big library for better performance... no
checking for maximum of jobs per processor... 1
checking for maximum parallelism for gmake... per module:1, for tail_build:1
setting up the build environment variables...
checking solver path... default
setting up the post_download check script
configure: creating ./config.status
config.status: creating ooo.lst
config.status: creating set_soenv
config.status: creating bin/repo-list
config.status: creating desktop/scripts/soffice.sh
config.status: creating build_env
Setting up the environment for building LibreOffice
Setting Solaris specific values... done

****************************************************************************
*
* LibreOffice configuration finished.
*
****************************************************************************
To build, issue:
gmake

To install when the build is finished, issue:
gmake install

If you want to develop LibreOffice, you might prefer:
gmake dev-install

If you want to run the smoketest, issue:
gmake check

$ gmake
gmake[1]: Entering directory `/usr/local/src/libreoffice-core-3.5.0.1'
gmake[1]: `/usr/local/src/libreoffice-core-3.5.0.1/Env.Host.sh' is up to date.
gmake[1]: Leaving directory `/usr/local/src/libreoffice-core-3.5.0.1'
gmake[1]: Entering directory `/usr/local/src/libreoffice-core-3.5.0.1'
cd /usr/local/src/libreoffice-core-3.5.0.1 && ./download ./ooo.lst &&
touch /usr/local/src/libreoffice-core-3.5.0.1/src.downloaded
********************************************************************
*
*   Running the post download checks.
*
********************************************************************
checking build system type... i386-pc-solaris2.11
checking host system type... i386-pc-solaris2.11
cd /usr/local/src/libreoffice-core-3.5.0.1/instsetoo_native && unset
MAKEFLAGS && export gb_SourceEnvAndRecurse_STAGE=gbuild &&
/usr/local/src/libreoffice-core-3.5.0.1/solenv/bin/build.pl  -P1 --all
-- -P1 gb_MAKETARGET=all


=============
(1/141) Building module solenv
=============
Entering /usr/local/src/libreoffice-core-3.5.0.1/solenv

Entering /usr/local/src/libreoffice-core-3.5.0.1/solenv/gdb

solenv deliver
Module 'solenv' delivered successfully. 0 files copied, 6 files unchanged

=============
(2/141) Building module lpsolve
=============

=============
(3/141) Building module sane
=============

=============
(4/141) Building module soltools
=============

=============
(5/141) Building module stlport
=============

=============
(6/141) Building module afms
=============

=============
(7/141) Building module nss
=============

=============
(8/141) Building module more_fonts
=============

=============
(9/141) Building module vigra
=============

=============
(10/141) Building module extras
=============

=============
(11/141) Building module hsqldb
=============

=============
(12/141) Building module xml2cmp
=============

=============
(13/141) Building module tomcat
=============

=============
(14/141) Building module unixODBC
=============

=============
(15/141) Building module beanshell
=============

=============
(16/141) Building module stax
=============
Entering /usr/local/src/libreoffice-core-3.5.0.1/lpsolve

cp: cannot stat
`./unxsogi.pro/misc/build/lp_solve_5.5/lpsolve55/liblpsolve55.so': No
such file or directory
dmake:  Error code 1, while making
'./unxsogi.pro/misc/build/so_predeliver_lpsolve'
Entering /usr/local/src/libreoffice-core-3.5.0.1/sane/prj

/usr/bin/bash: /usr/sfw/bin/make: No such file or directory
dmake:  Error code 127, while making 'all'
Entering /usr/local/src/libreoffice-core-3.5.0.1/soltools/mkdepend

Making:    makedepend
ld: fatal: library -lCstd: not found
ld: fatal: file processing errors. No output written to
../unxsogi.pro/bin/makedepend
collect2: ld returned 1 exit status
dmake:  Error code 1, while making '../unxsogi.pro/bin/makedepend'
Entering /usr/local/src/libreoffice-core-3.5.0.1/stlport

Nothing to do
Entering /usr/local/src/libreoffice-core-3.5.0.1/afms

Entering /usr/local/src/libreoffice-core-3.5.0.1/nss

/usr/bin/bash: /usr/sfw/bin/make: No such file or directory
dmake:  Error code 127, while making './unxsogi.pro/misc/build/so_built_nss'
Entering /usr/local/src/libreoffice-core-3.5.0.1/more_fonts/fonts/ttf_dejavu

Entering /usr/local/src/libreoffice-core-3.5.0.1/vigra

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/samples-nonfree/documentation/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/hsqldb

Entering /usr/local/src/libreoffice-core-3.5.0.1/xml2cmp/prj

/usr/bin/bash: /usr/sfw/bin/make: No such file or directory
dmake:  Error code 127, while making 'all'
Entering /usr/local/src/libreoffice-core-3.5.0.1/tomcat

Entering /usr/local/src/libreoffice-core-3.5.0.1/unixODBC/prj

/usr/bin/bash: /usr/sfw/bin/make: No such file or directory
dmake:  Error code 127, while making 'all'
Entering /usr/local/src/libreoffice-core-3.5.0.1/beanshell

Entering /usr/local/src/libreoffice-core-3.5.0.1/stax

Your java version already contains StAX
stlport deliver
Module 'stlport' delivered successfully. 0 files copied, 0 files unchanged
afms deliver
Module 'afms' delivered successfully. 0 files copied, 1 files unchanged
Entering /usr/local/src/libreoffice-core-3.5.0.1/more_fonts/fonts/ttf_gentium

vigra deliver
Module 'vigra' delivered successfully. 0 files copied, 82 files unchanged
Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/rulers

Making:    galleryrulers.dpz

Making:    gallrulers.zip
rebuilding zipfiles
------------------------------
Making:    galleryrulers.dpz

hsqldb deliver
Module 'hsqldb' delivered successfully. 0 files copied, 1 files unchanged
tomcat deliver
Module 'tomcat' delivered successfully. 0 files copied, 1 files unchanged
beanshell deliver
Module 'beanshell' delivered successfully. 0 files copied, 1 files unchanged
stax deliver
Module 'stax' delivered successfully. 0 files copied, 0 files unchanged
Entering /usr/local/src/libreoffice-core-3.5.0.1/more_fonts/fonts/ttf_linlibertineg

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/finance/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/more_fonts/fonts/ttf_amt

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates-nonfree/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/more_fonts/fonts/ttf_liberation

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/misc/lang

more_fonts deliver
Module 'more_fonts' delivered successfully. 0 files copied, 60 files unchanged
Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/common/officorr

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates-nonfree/misc/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/templates/layout

Making:    templateslayout.dpz

Making:    tpllayoutimpr.zip
rebuilding zipfiles
------------------------------
/tmp/striplanguagetags.sh.MzMUE9
/usr/local/src/libreoffice-core-3.5.0.1/extras/source/templates/layout
/usr/local/src/libreoffice-core-3.5.0.1/extras/source/templates/layout
Making:    templateslayout.dpz

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates-nonfree/presnt/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/accessories/Photos/Space

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/database

Making:    databasegeneral.dpz


Making:    database.zip
rebuilding zipfiles
------------------------------
Making:    databasebiblio.zip
rebuilding zipfiles
------------------------------
Making:    databasegeneral.dpz


Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/wordbook

Making:    wordbookall.dpz

Making:    wordbook.zip
rebuilding zipfiles
------------------------------
Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/accessories/Photos/Celebration

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/samples/documentation/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/templates/wizard/letter/lang

Making:    templateswizardletter.dpz

Making:    tplwizletter.zip
rebuilding zipfiles
------------------------------
Making:    templateswizardletter.dpz

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/accessories/Photos/Humans

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/accessories

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/gallery_system

Making:    gallerygallerysystem.dpz

Making:    gallsystem.zip
rebuilding zipfiles
------------------------------
Making:    gallerygallerysystem.dpz

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates-nonfree/forms/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/templates/wizard/report/lang

Making:    templateswizardreport.dpz

Making:    tplwizreport_en-US.zip
rebuilding zipfiles
------------------------------
Making:    templateswizardreport.dpz

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/templates/presnt/lang

Making:    templatespresnt.dpz

Making:    tplpresntimpr_en-US.zip
rebuilding zipfiles
------------------------------
/tmp/striplanguagetags.sh.yf62Hi
/usr/local/src/libreoffice-core-3.5.0.1/extras/source/templates/presnt/lang
/usr/local/src/libreoffice-core-3.5.0.1/extras/source/templates/presnt/lang
Making:    templatespresnt.dpz

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/accessories/Photos/Objects

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/accessories/Photos/Statues

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/common/finance

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/common/offimisc

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/htmlexpo

Making:    galleryhtmlexpo.dpz

Making:    gallhtmlexpo.zip
rebuilding zipfiles
------------------------------
Making:    galleryhtmlexpo.dpz

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/www-graf

Making:    gallerywwwgraf.dpz

Making:    gallwwwgraf.zip
rebuilding zipfiles
------------------------------
Making:    gallerywwwgraf.dpz

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/common

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/forms/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/www-back

Making:    gallerywwwback.dpz

Making:    gallwwwback.zip
rebuilding zipfiles
------------------------------
Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/accessories/Elements/Bullets2

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/symbols

Making:    symbols.dpz

Making:    symbols.zip
rebuilding zipfiles
------------------------------
Making:    symbols.dpz

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/accessories-nonfree

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/accessories/Photos/Landscapes

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates-nonfree/labels/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/common/misc

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/accessories/Draws/People

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/layout/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/samples-nonfree/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/presnt/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/templates/wizard/fax/lang

Making:    templateswizardfax.dpz

Making:    tplwizfax_en-US.zip
rebuilding zipfiles
------------------------------
Making:    templateswizardfax.dpz

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/officorr/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/accessories/Photos/Buildings

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/samples-nonfree/advertisement/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates-nonfree/finance/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/accessories/Photos/Plants

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/samples/advertisement/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/common/presnt

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/unx/source/bitmaps

Making:    unxbitmaps.dpz

Making:    cfgsrvbitmapunx.zip
rebuilding zipfiles
------------------------------
Making:    unxbitmaps.dpz

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates-nonfree/educate/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/accessories/Photos/Fauna

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/bullets

Making:    gallerybullets.dpz

Making:    gallbullets.zip
rebuilding zipfiles
------------------------------
Making:    gallerybullets.dpz

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates-nonfree/personal/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/accessories/Photos/Travel

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/templates/wizard/bitmap

Making:    templateswizardbitmap.dpz

Making:    tplwizbitmap.zip
rebuilding zipfiles
------------------------------
Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/templates/wizard/styles/lang

Making:    templateswizardstyles.dpz

Making:    tplwizstyles_en-US.zip
rebuilding zipfiles
------------------------------
Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/samples/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/accessories/Photos/Cities

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/offimisc/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/gallery_sound

Making:    gallerygallerysound.dpz

Making:    gallsound.zip
rebuilding zipfiles
------------------------------
Making:    gallerygallerysound.dpz

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates-nonfree/offimisc/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/educate/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/palettes

Making:    palettesgeneral.dpz

Making:    palettes.zip
rebuilding zipfiles
------------------------------
Making:    palettesgeneral.dpz

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/accessories/Photos/FoodsandDrinks

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/templates/wizard/agenda/lang

Making:    templateswizardagenda.dpz

Making:    tplwizagenda_en-US.zip
rebuilding zipfiles
------------------------------
Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/labels/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/sounds

Making:    gallerysounds.dpz

Making:    gallsounds.zip
rebuilding zipfiles
------------------------------
Making:    gallerysounds.dpz

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/templates/wizard/desktop/lang

Making:    templateswizarddesktop.dpz

Making:    tplwizdesktop_en-US.zip
rebuilding zipfiles
------------------------------
Making:    templateswizarddesktop.dpz

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/personal/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates-nonfree/layout/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/common/educate

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/common/forms

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/common/personal

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/common/layout

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates/common/labels

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery

Making:    gallerygeneral.dpz

Making:    gallroot.zip
rebuilding zipfiles
------------------------------
Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/autotext

Making:    autotextnolang.dpz

Making:    autotextuser.zip
rebuilding zipfiles
------------------------------
Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/premium/templates-nonfree/officorr/lang

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/gallery/accessories/Photos/Flowers

Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/autotext/lang

Making:    autotext.dpz


Making:    autotextshare_en-US.zip
rebuilding zipfiles
------------------------------
Making:    autocorr.zip
rebuilding zipfiles
------------------------------
Making:    autotext.dpz


Entering /usr/local/src/libreoffice-core-3.5.0.1/extras/source/misc_config

Making:    miscconfiggeneral.dpz


Making:    cfgsrvnolang.zip
rebuilding zipfiles
------------------------------
Making:    cfgusr.zip
rebuilding zipfiles
------------------------------
Making:    miscconfiggeneral.dpz


extras deliver
Module 'extras' delivered successfully. 36 files copied, 0 files unchanged

=============
(17/141) Building module saxon
=============

=============
(18/141) Building module apache-commons
=============
Entering /usr/local/src/libreoffice-core-3.5.0.1/saxon

Entering /usr/local/src/libreoffice-core-3.5.0.1/apache-commons/java/logging

saxon deliver
Module 'saxon' delivered successfully. 0 files copied, 1 files unchanged
Entering /usr/local/src/libreoffice-core-3.5.0.1/apache-commons/java/codec

Entering /usr/local/src/libreoffice-core-3.5.0.1/apache-commons/java/httpclient

Entering /usr/local/src/libreoffice-core-3.5.0.1/apache-commons/java/lang

apache-commons deliver
Module 'apache-commons' delivered successfully. 0 files copied, 4
files unchanged

=============
(19/141) Building module jfreereport
=============
Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/libbase

Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/libloader

Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/sac

Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/libserializer

Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/flute

Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/libformula

Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/libxml

Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/libfonts

Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/librepository

Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/liblayout

Entering /usr/local/src/libreoffice-core-3.5.0.1/jfreereport/java/jfreereport

jfreereport deliver
Module 'jfreereport' delivered successfully. 0 files copied, 13 files unchanged

-----------------------------------------------------------------------
        Oh dear - something failed during the build - sorry !
  For more help with debugging build errors, please see the section in:
            http://wiki.documentfoundation.org/Development

  internal build errors:

ERROR: error 65280 occurred while making
/usr/local/src/libreoffice-core-3.5.0.1/unixODBC/prj
ERROR: error 65280 occurred while making
/usr/local/src/libreoffice-core-3.5.0.1/nss
ERROR: error 65280 occurred while making
/usr/local/src/libreoffice-core-3.5.0.1/soltools/mkdepend
ERROR: error 65280 occurred while making
/usr/local/src/libreoffice-core-3.5.0.1/xml2cmp/prj
ERROR: error 65280 occurred while making
/usr/local/src/libreoffice-core-3.5.0.1/sane/prj
ERROR: error 65280 occurred while making
/usr/local/src/libreoffice-core-3.5.0.1/lpsolve

 it seems you are using a threaded build, which means that the
 actual compile error is probably hidden far above, and could be
 inside any of these other modules:
     sane soltools nss xml2cmp unixODBC
 please re-run build inside each one to isolate the problem.
-----------------------------------------------------------------------

/usr/bin/bash
cd /usr/local/src/libreoffice-core-3.5.0.1
source ./Env.Host.sh
cd lpsolve
rm -Rf /usr/local/src/libreoffice-core-3.5.0.1/lpsolve/unxsogi.pro #
optional module 'clean'
build

when the problem is isolated and fixed exit and re-run 'make' from the top-level
gmake[1]: *** [build] Error 1
gmake[1]: Leaving directory `/usr/local/src/libreoffice-core-3.5.0.1'
gmake: *** [source-env-and-recurse] Error 2
_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
Norbert Thiebaud Norbert Thiebaud
Reply | Threaded
Open this post in threaded view
|

Re: LibreOffice / openIndiana ...

/usr/bin/bash: /usr/sfw/bin/make: No such file or directory

you want to remove
GNUMAKE=/usr/sfw/bin/make
from solenv/inc/unitools.mk
or at the very least replace = by *=

as I mentionned earlier GNUMAKE is always set by configure.in

Norbert
_______________________________________________
LibreOffice mailing list
[hidden email]
http://lists.freedesktop.org/mailman/listinfo/libreoffice
Next » 123